Correct ZynqMP configuration to be appropriately named

[openocd.git] / tcl / target / nrf51.cfg

diff --git a/tcl/target/nrf51.cfg b/tcl/target/nrf51.cfg
index 129060d356105dd32856eeb764901d4effdc0db8..4f2402033b4896c050737a3f189b102f2a8fcd9c 100644 (file)
--- a/tcl/target/nrf51.cfg
+++ b/tcl/target/nrf51.cfg
@@ -1,5 +1,5 @@
 #
-# script for Nordic nRF51 series, a CORTEX-M0 chip
+# script for Nordic nRF51 series, a Cortex-M0 chip
 #
 
 source [find target/swj-dp.tcl]
@@ -17,11 +17,11 @@ if { [info exists ENDIAN] } {
 }
 
 # Work-area is a space in RAM used for flash programming
-# By default use 2kB
+# By default use 16kB
 if { [info exists WORKAREASIZE] } {
    set _WORKAREASIZE $WORKAREASIZE
 } else {
-   set _WORKAREASIZE 0x800
+   set _WORKAREASIZE 0x4000
 }
 
 if { [info exists CPUTAPID] } {
@@ -31,9 +31,10 @@ if { [info exists CPUTAPID] } {
 }
 
 swj_newdap $_CHIPNAME cpu -expected-id $_CPUTAPID
+dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -dap $_CHIPNAME.dap
 
 $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0