target: rename cortex_a8 to cortex_a

[openocd.git] / tcl / target / samsung_s3c2410.cfg

diff --git a/tcl/target/samsung_s3c2410.cfg b/tcl/target/samsung_s3c2410.cfg
index 6dca7efd3de98681b1c9521a37af6a39381dfc5d..ae7a1389027839f4bd2dd38b45c35e8b653e21b9 100644 (file)
--- a/tcl/target/samsung_s3c2410.cfg
+++ b/tcl/target/samsung_s3c2410.cfg
@@ -1,22 +1,23 @@
 # Found on the 'TinCanTools' Hammer board.
 
-if { [info exists CHIPNAME] } {        
-   set  _CHIPNAME $CHIPNAME    
-} else {        
-   set  _CHIPNAME s3c2410
+if { [info exists CHIPNAME] } {
+   set _CHIPNAME $CHIPNAME
+} else {
+   set _CHIPNAME s3c2410
 }
 
-if { [info exists ENDIAN] } {  
-   set  _ENDIAN $ENDIAN    
-} else {        
+if { [info exists ENDIAN] } {
+   set _ENDIAN $ENDIAN
+} else {
   # This config file was defaulting to big endian..
-   set  _ENDIAN little
+   set _ENDIAN little
 }
 
-if { [info exists CPUTAPID] } {        
-   set  _CPUTAPID $CPUTAPID    
-} else {        
-   set  _CPUTAPID 0xffffffff
+if { [info exists CPUTAPID] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+   # Force an error until we get a good number.
+   set _CPUTAPID 0xffffffff
 }
 
 #use combined on interfaces or targets that cannot set TRST/SRST separately
@@ -28,7 +29,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP
 set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm920t
 
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x30800000 -work-area-size 0x20000 -work-area-backup 0
+$_TARGETNAME configure -work-area-phys 0x30800000 -work-area-size 0x20000 -work-area-backup 0
 
 # speed up memory downloads
 arm7_9 fast_memory_access enable