target config files: Fix whitespace issues.

[openocd.git] / tcl / target / stm32f1x.cfg

diff --git a/tcl/target/stm32f1x.cfg b/tcl/target/stm32f1x.cfg
index 25a6059a0194666187192d3a88531ad77d1baf0d..2390f28947e99baab7d1328a7aaafbabb76db3af 100644 (file)
--- a/tcl/target/stm32f1x.cfg
+++ b/tcl/target/stm32f1x.cfg
@@ -1,23 +1,23 @@
 # script for stm32
 
 if { [info exists CHIPNAME] } {
-   set  _CHIPNAME $CHIPNAME
+   set _CHIPNAME $CHIPNAME
 } else {
-   set  _CHIPNAME stm32
+   set _CHIPNAME stm32
 }
 
 if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
+   set _ENDIAN $ENDIAN
 } else {
-   set  _ENDIAN little
+   set _ENDIAN little
 }
 
 # Work-area is a space in RAM used for flash programming
 # By default use 16kB
 if { [info exists WORKAREASIZE] } {
-   set  _WORKAREASIZE $WORKAREASIZE
+   set _WORKAREASIZE $WORKAREASIZE
 } else {
-   set  _WORKAREASIZE 0x4000
+   set _WORKAREASIZE 0x4000
 }
 
 # JTAG speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so use F_JTAG = 1MHz
@@ -27,7 +27,7 @@ adapter_nsrst_delay 100
 jtag_ntrst_delay 100
 
 #jtag scan chain
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
   # See STM Document RM0008
@@ -36,7 +36,7 @@ if { [info exists CPUTAPID ] } {
 }
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
-if { [info exists BSTAPID ] } {
+if { [info exists BSTAPID] } {
    # FIXME this never gets used to override defaults...
    set _BSTAPID $BSTAPID
 } else {