target/stm32h7x: Fix documentation of reset_config
[openocd.git] / tcl / target / stm32h7x.cfg
index 10477a5a70dd3da17d050b2bf606d08f5bce4074..0bfc43dfd4a7df790615a0a867291b797867cc28 100644 (file)
@@ -56,13 +56,31 @@ if {[using_jtag]} {
  jtag_ntrst_delay 100
 }
 
-# use hardware reset, connect under reset
+# use hardware reset
+#
+# The STM32H7 does not support connect_assert_srst mode because the AXI is
+# unavailable while SRST is asserted, and that is used to access the DBGMCU
+# component at 0x5C001000 in the examine-end event handler.
+#
+# It is possible to access the DBGMCU component at 0xE00E1000 via AP2 instead
+# of the default AP0, and that works with SRST asserted; however, nonzero AP
+# usage does not work with HLA, so is not done by default. That change could be
+# made in a local configuration file if connect_assert_srst mode is needed for
+# a specific application and a non-HLA adapter is in use.
 reset_config srst_only srst_nogate
 
 if {![using_hla]} {
    # if srst is not fitted use SYSRESETREQ to
    # perform a soft reset
    cortex_m reset_config sysresetreq
+
+   # Set CSW[27], which according to ARM ADI v5 appendix E1.4 maps to AHB signal
+   # HPROT[3], which according to AMBA AHB/ASB/APB specification chapter 3.7.3
+   # makes the data access cacheable. This allows reading and writing data in the
+   # CPU cache from the debugger, which is far more useful than going straight to
+   # RAM when operating on typical variables, and is generally no worse when
+   # operating on special memory locations.
+   $_CHIPNAME.dap apcsw 0x08000000 0x08000000
 }
 
 $_TARGETNAME configure -event examine-end {
@@ -92,3 +110,4 @@ $_TARGETNAME configure -event reset-init {
        # Clock after reset is HSI at 64 MHz, no need of PLL
        adapter_khz 4000
 }
+

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)