target/xtensa: avoid IHI for writes to non-executable memory

[openocd.git] / tcl / target / stm32x5x_common.cfg

diff --git a/tcl/target/stm32x5x_common.cfg b/tcl/target/stm32x5x_common.cfg
index 321abff80a96b81e5ca9cc732663d306792830af..fb3aeb18c158d4b96417a1b97fffdc7bf1788422 100644 (file)
--- a/tcl/target/stm32x5x_common.cfg
+++ b/tcl/target/stm32x5x_common.cfg
@@ -58,7 +58,9 @@ if {[using_jtag]} {
 
 reset_config srst_nogate
 
-if {![using_hla]} {
+if {[using_hla]} {
+       echo "Warn : The selected adapter does not support debugging this device in secure mode"
+} else {
        # if srst is not fitted use SYSRESETREQ to
        # perform a soft reset
        cortex_m reset_config sysresetreq
@@ -71,13 +73,18 @@ proc stm32x5x_is_secure {} {
 }
 
 proc stm32x5x_ahb_ap_non_secure_access {} {
-       # SPROT=1=Non Secure access, Priv=1
-       [[target current] cget -dap] apcsw 0x4B000000 0x4F000000
+       # in HLA mode, non-secure debugging is possible without changing the AP CSW
+       if {![using_hla]} {
+               # SPROT=1=Non Secure access, Priv=1
+               [[target current] cget -dap] apcsw 0x4B000000 0x4F000000
+       }
 }
 
 proc stm32x5x_ahb_ap_secure_access {} {
-       # SPROT=0=Secure access, Priv=1
-       [[target current] cget -dap] apcsw 0x0B000000 0x4F000000
+       if {![using_hla]} {
+               # SPROT=0=Secure access, Priv=1
+               [[target current] cget -dap] apcsw 0x0B000000 0x4F000000
+       }
 }
 
 $_TARGETNAME configure -event reset-start {