jtag: linuxgpiod: drop extra parenthesis

[openocd.git] / tcl / target / ti_dm365.cfg

diff --git a/tcl/target/ti_dm365.cfg b/tcl/target/ti_dm365.cfg
index a260278601155a8693f38baf4178b30e4e1747a5..e19efd7ee40a8bb3b7957f41046d9491f0a29a21 100644 (file)
--- a/tcl/target/ti_dm365.cfg
+++ b/tcl/target/ti_dm365.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 #
 # Texas Instruments DaVinci family: TMS320DM365
 #
@@ -82,7 +84,7 @@ target create $_TARGETNAME arm926ejs -chain-position $_TARGETNAME
 # NOTE that work-area-virt presumes a Linux 2.6.30-rc2+ kernel,
 # and that the work area is used only with a kernel mmu context ...
 $_TARGETNAME configure \
-       -work-area-virt [expr 0xfffe0000 + 0x4000] \
+       -work-area-virt [expr {0xfffe0000 + 0x4000}] \
        -work-area-phys [dict get $dm365 sram1] \
        -work-area-size 0x4000 \
        -work-area-backup 0
@@ -90,8 +92,8 @@ $_TARGETNAME configure \
 # be absolutely certain the JTAG clock will work with the worst-case
 # CLKIN = 19.2 MHz (best case: 36 MHz) even when no bootloader turns
 # on the PLL and starts using it.  OK to speed up after clock setup.
-jtag_rclk 1500
-$_TARGETNAME configure -event "reset-start" { jtag_rclk 1500 }
+adapter speed 1500
+$_TARGETNAME configure -event "reset-start" { adapter speed 1500 }
 
 arm7_9 fast_memory_access enable
 arm7_9 dcc_downloads enable