X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=NEWS;h=47a8fa66276dfa16b14b0e88c6ec043f52b51015;hp=e3e813cbae5e9b3528f57d6fe9affec8e41ae856;hb=da2e40bcd3541a172ed037d57b7eaafb479f94d5;hpb=84dbf8ab5a2e85c9d9c9d276fba152a45a441433

diff --git a/NEWS b/NEWS
index e3e813cbae..47a8fa6627 100644
--- a/NEWS
+++ b/NEWS
@@ -1,73 +1,35 @@
 This file includes highlights of the changes made in the
-OpenOCD 0.4.0 source archive release.  See the repository
-history for details about what changed, including bugfixes
-and other issues not mentioned here.
+OpenOCD  source archive release.  See the
+repository history for details about what changed, including
+bugfixes and other issues not mentioned here.
 
 JTAG Layer:
-	Support KT-Link JTAG adapter.
-	Support USB-JTAG, Altera USB-Blaster and compatibles.
+	New TI ICDI adapter support.
+	Support Latest OSBDM firmware.
+	Improved MIPS EJTAG Support.
 
 Boundary Scan:
+
 Target Layer:
-	General
-		- new "reset-assert" event, for systems without SRST
-	ARM
-		- renamed "armv4_5" command prefix as "arm"
-		- recognize TrustZone "Secure Monitor" mode
-		- "arm regs" command output changed
-		- register names use "sp" not "r13"
-		- add top-level "mcr" and "mrc" commands, replacing
-		  various core-specific operations
-		- basic semihosting support
-	ARM11
-		- Preliminary ETM and ETB hookup
-		- accelerated "flash erase_check"
-		- accelerated GDB memory checksum
-		- support "arm regs" command
-		- can access all core modes and registers
-		- watchpoint support
-	Cortex-A8
-		- support "arm regs" command
-		- can access all core modes and registers
-		- supports "reset-assert" event (used on OMAP3530)
-		- watchpoint support
-	Cortex-M3
-		- Exposed DWT registers like cycle counter
-	ETM, ETB
-		- "trigger_percent" command moved ETM --> ETB
-		- "etm trigger_debug" command added
-	Freescale DSP563xx cores (partial support)
+	New ARMv7R and Cortex-R4 support.
+	Added ChibiOS/RT support.
 
 Flash Layer:
-	'flash bank' and 'nand device' take <bank_name> as first argument.
-	With this, flash/NAND commands allow referencing banks by name:
-		- <bank_name>: reference the bank with its defined name
-		- <driver_name>[.N]: reference the driver's Nth bank
-	New 'nand verify' command to check bank against an image file.
-	The "flash erase_address" command now rejects partial sectors;
-		previously it would silently erase extra data.
-	New at91sam9 NAND controller driver.
+	New NXP LPC1850 support.
+	New NXP LPC4300 support.
+	New NXP SPIFI support.
+	New Energy Micro EFM32 support.
+	New ST STM32W support.
+	New ST STM32f2 write protection and lock/unlock support.
+	Ability to override STM32 flash bank size.
 
 Board, Target, and Interface Configuration Scripts:
-	ARM9
-		- ETM and ETB hookup for iMX2* targets
-	Add $HOME/.openocd to the search path.
-
-Core Jim/TCL Scripting:
-	New 'usage' command to provide terse command help.
-	Improved command 'help' command output (sorted and indented).
-	Improved command handling:
-		- Most boolean settings now accept any of the following:
-		  on/off, enable/disable, true/false, yes/no, 1/0
-		- More error checking and reporting.
+	Support Freescale i.MX6 series targets.
 
 Documentation:
-	New built-in command development documentation and primer.
+	New MIPS debugging info.
 
 Build and Release:
-	Use --enable-doxygen-pdf to build PDF developer documentation.
-	Consider upgrading to libftdi 0.17 if you use that library; it
-		includes bugfixes which improve FT2232H support.
 
 For more details about what has changed since the last release,
 see the git repository history.  With gitweb, you can browse that
@@ -78,4 +40,4 @@ For older NEWS, see the NEWS files associated with each release
 
 For more information about contributing test reports, bug fixes, or new
 features and device support, please read the new Developer Manual (or
-the BUGS and PATCHES files in the source archive).
+the BUGS and PATCHES.txt files in the source archive).