X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=NEWS;h=9df165004a17b561a1a9b7f37a9506a7cfb53a6f;hp=e3b1e2565e5f0f87b3e95e065b655df3a6b0fd7a;hb=96903e6df43e2bc967267e034edf15a7c274d044;hpb=0e7bcf850bd2fe2f09f0ee527e8e51bc5b8f2882 diff --git a/NEWS b/NEWS index e3b1e2565e..9df165004a 100644 --- a/NEWS +++ b/NEWS @@ -2,149 +2,27 @@ This file includes highlights of the changes made in the OpenOCD source archive release. JTAG Layer: - * New driver for J-Link adapters based on libjaylink - (including support for FPGA configuration, SWO and EMUCOM) - * FTDI improvements to work at 30MHz clock - * BCM2835 native driver SWD and Raspberry Pi2 support - * BCM2835 is set to 4ma drive, slow slew rate - * ixo-usb-jtag (emulation of an Altera Bus Blaster I on - Cypress FX2 IC) support - * JTAG pass-through mode for CMSIS-DAP (including support for - FPGA configuration) - * OpenJTAG support for Cypress CY7C65215 - * connect_assert_srst support for SWD - * Xilinx Virtex-II Series7 bitstream loading support - * Use JEP106 data to decode IDs - * Deprecated "ft2232" driver removed (use "ftdi" instead) - * GPL-incompatible FTDI D2XX library support dropped (Presto, - OpenJTAG and USB-Blaster I are using libftdi only now) - * ZY1000 support dropped (unmaintained since long) - * oocd_trace support dropped Boundary Scan: Target Layer: - * ARMv7-A, Cortex-M, Cortex-A/R important fixes and - improvements (allowing e.g. simultaneous debugging of A8 and - M3 cores, JTAG WAIT support etc.) - * ARM Cortex-A,R allow interrupt disable during single-step - (maskisr command) - * Semihosting support for ARMv7-A - * ARM Cortex-M7 support - * Intel Quark mcu D2000 support - * Freescale LS102x SAP support - * ThreadX RTOS support on ARM926E-JS - * Cortex-M RTOS stack alignment fixes - * FreeRTOS FPU support - * uC/OS-III RTOS support - * bridging semihosting to GDB's File-I/O support - * -defer-examine option added to target create command - * verify_image_checksum command added Flash Layer: - * Atmel SAM4S, SAM4N, SAM4C support - * Atmel SAMV, SAMS, SAME (Cortex-M7) support - * Atmel AT91SAMD handle reset run/halt in DSU, other fixes - * Atmel AT91SAML21, SAML22, SAMC20/SAMC21, SAMD09 support - * ST STM32F4x support - * ST STM32F74x/76x/77x, STM32L4 support - * ST STM32L0 categories 1, 2 and 5 support - * Kinetis K02, K21, K22, K24, K26, K63, K64, K66 support - * Kinetis KE, KVx, K8x families support - * Kinetis FlexNVM handling - * Kinetis flash protection, security, mass_erase improvements - * Infineon XMC4xxx family support - * Infineon XMC1000 flash driver - * Energy Micro EFM32 Happy Gecko support - * Energy Micro EFM32 debug interface lock support - * Analog Devices ADuCM360 support - * Unified Nuvoton NuMicro flash driver - * NIIET K1921VK01T (Cortex-M4) support - * Nordic Semiconductor nRF51 improvements - * Spansion FM4 flash (including MB9BFx64/x65, S6E2DH) driver - * Ambiq Micro Apollo flash driver - * PIC32MX new device IDs, 17x/27x flash support - * read_bank() and verify_bank() NOR flash internal API to - allow reading (and verifying) non-memory-mapped devices - * JTAGSPI driver to access SPI NOR flashes via a trivial - FPGA proxy - * Milandr read/verify for Info memory support - * Various discrete SPI NOR flashes support - * CFI 16-bit flash reversed endianness support Board, Target, and Interface Configuration Scripts: - * Digilent JTAG-HS2, JTAG-HS3 interfaces configs - * FTDI UM232H module as JTAG interface config - * 100ask's OpenJTAG interface config - * MBFTDI interface config - * XDS100v3 interface config - * Freescale Vybrid VF6xx target config - * EmCraft VF6 SOM and baseboard configs - * Freescale SabreSD board config - * Freescale VF65GS10 tower board config - * Pipistrello Xilinx Spartan6 LX45 FPGA board config - * miniSpartan6+ board config - * Xilinx Kintex7 Development board config - * Parallella-I board config - * Digilent Atlys and Analog Discovery board configs - * Numato Opsis board config - * Xilinx Spartan 6 FPGA "Device DNA" reading support - * Altera 10M50 FPGA (MAX10 family) target config - * Altera EPM240 CPLD (MAXII family) target config - * Marsohod2, Marsohod3 FPGA, Marsohod CPLD boards configs - * Novena's integrated FPGA board config - * XMOS XS1-XAU8A-10's ARM core config - * XMOS xCORE-XA Core Module board config - * Exynos5250 target config - * Arndale board config - * FM4 MB9BFxxx family configs - * Spansion SK-FM4-U120-9B560 board config - * Diolan LPC4357-DB1 board config - * ST STM32F469 discovery board config - * ST STM32F7-DISCO, STM327[4|5]6G-EVAL boards configs - * ST STM32L4 discovery, NUCLEO L476RG, STM32F429I-DISC1 boards - configs - * Atheros AR2313, AR2315 targets config - * Netgear WP102 board config - * La Fonera FON2200 board config - * Linksys WAG200G board config - * LPC-Link2 board config - * NXP LPC4370 target config - * Atmel SAMV, SAMS, SAME target configs - * Atmel SAM E70 Xplained, SAM V71 Xplained Ultra boards - configs - * Nordic nRF52 target config - * Nordic nRF51-DK, nRF52-DK boards configs - * Infineon XMC4700 Relax Kit, XMC4800 Relax EtherCAT Kit, - XMC4300 Relax EtherCAT Kit boards configs - * Renesas S7G2 target config - * Renesas DK-S7G2 board config - * Altera EP3C10 FPGA (Cyclone III family) target config - * TI MSP432P4xx target config - * Cypress PSoC 5LP target config - * Analog Devices ADSP-SC58x target config (Cortex-A5 core only) Server Layer: - * tcl_trace command for async target trace output via Tcl RPC Documentation: Build and Release: - * Various fixes thanks to http://coccinellery.org/ - * libftdi is now autodetected with pkgconfig - * Releases should now support reproducible builds - * Conversion to non-recursive make, requires automake >= 1.14 - * Udev rules modified to add uaccess tag and moved to - 60-openocd.rules - * Support searching for scripts relative to the openocd binary - for all major architectures This release also contains a number of other important functional and cosmetic bugfixes. For more details about what has changed since the last release, see the git repository history: -http://sourceforge.net/p/openocd/code/ci/v0.10.0/log/?path= +http://sourceforge.net/p/openocd/code/ci/v0.x.0/log/?path= For older NEWS, see the NEWS files associated with each release