X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=NEWS;h=9df165004a17b561a1a9b7f37a9506a7cfb53a6f;hp=f56c7a4f38342d5790b64d1862ef700a4db633c5;hb=89f07325f2e7ca9d28ba0c54a26e3aab8b34984a;hpb=1930e08b99b10969538851bdc28501e5d3ca9f21

diff --git a/NEWS b/NEWS
index f56c7a4f38..9df165004a 100644
--- a/NEWS
+++ b/NEWS
@@ -1,80 +1,33 @@
-The OpenOCD 0.2.0 source archive release includes numerous improvements
-that were made since the initial 0.1.0 source archive release.  Many
-contributors helped make this release a great success, and the community
-of developers and maintainers look forward to any response.
-
-In addition to the list of changes below, countless bug fixing and
-cleaning was performed across the tree.  Various TCL command parameters
-must past stricter value checks, and many more error conditions have
-been handled correctly.  These efforts helped to make the 0.2.0 release
-more stable and robust, though some changes may expose latent bugs in
-your existing configuration scripts.
- 
-This release does not maintain backward compatibility in all respects,
-so some target or configuration scripts may need to be updated.  In some
-cases, you may also see warnings; resolve those, because they indicate
-commands that will be removed in the future.
-
-The following areas of OpenOCD functionality changed in this release:
+This file includes highlights of the changes made in the OpenOCD
+source archive release.
 
 JTAG Layer:
-- Improves modularity: core, TCL, driver commands, and interface have
-  been separated, encapsulated, and documented for developers.  Mostly.
-- Improves JTAG TAP transition tables: 
-   * Makes TAP paths variable length, rather than being fixed at 7 steps.
-   * Fixes problems with some targets that did not like longer paths.
-- Improves JTAG driver/minidriver modularity and encapsulation.
-- New drivers:
-   * Adds stub minidriver for developing new embedded JTAG interfaces.
-- Improves drivers:
-   * ft2232+ftd2xx:
-      + Adds initial high-speed device support: --enable-ftd2xx-highspeed
-      + Supports more types of FTDI-based devices.
-   * jlink:
-      + Works with more versions of the firmware (v3 and newer)
-      + Supports dynamically detects device capabilities and limits
-   * vsllink:
-      + Supports very long scan chains
-   * amtjtagaccel:
-      + Fixes broken ID code detection problems.
+
+Boundary Scan:
 
 Target Layer:
-- New devices: AVR, FA526
-- Improved support: ARM ADI, ARM11, MIPS
-- Numerous other bug fixes and improvements
 
 Flash Layer:
-- Improved drivers: mflash
-- New drivers: AT91SAM3, AVR, Davinci NAND
 
-Board, Interface, and Target Configuration Scripts:
-- Many new and improved targets and boards are now available.
-- Better separation of "board" and "target" configuration
-- Moved all TCL files to top-level "tcl" directory in the source tree
-- Installation moved from '$pkglibdir/' to '$pkgdatadir/scripts/'.
-- Site-specific files should be installed under '$pkgdatadir/site/';
-  files that exist this tree will be used in preference to default
-  distribution configurations in '$pkgdatadir/scripts/'.
+Board, Target, and Interface Configuration Scripts:
+
+Server Layer:
 
 Documentation:
-- Updated User Guide:     http://openocd.berlios.de/doc/html/index.html
-   * Partially re-written and re-organized.
-   * Standardized presentation for all commands.
-   * Covers many drivers and commands that were previously omitted.
-   * New index for commands and drivers.
-- Added Developer Manual: http://openocd.berlios.de/doc/doxygen/index.html
-   * Now includes architecture, technical primers, style guides, and more.
-   * Available in-tree and on-line.
 
 Build and Release:
-- Increased configuration and compilation warning coverage.
-   * Use --disable-werror to work around build errors caused by warnings.
-- Use libtool to produce helper libraries as a step toward "libopenocd".
-- New processes and scripting to facilitate future source releases.
 
-For more details about what has changed since 0.1.0, see the ChangeLog
-associated with this release.
+
+This release also contains a number of other important functional and
+cosmetic bugfixes. For more details about what has changed since the
+last release, see the git repository history:
+
+http://sourceforge.net/p/openocd/code/ci/v0.x.0/log/?path=
+
+
+For older NEWS, see the NEWS files associated with each release
+(i.e. NEWS-<version>).
 
 For more information about contributing test reports, bug fixes, or new
 features and device support, please read the new Developer Manual (or
-the BUGS and PATCHES files in the source archive).
+the BUGS and PATCHES.txt files in the source archive).