X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=NEWS;h=add6c1e9035498574967489daeda9eb5cb3aab56;hp=e69de29bb2d1d6434b8b29ae775ad8c2e48c5391;hb=73988aea1f68390cdc60f6b6b777f7a466935084;hpb=8b4e882a1630d63bbc9840fa3f968e36b6ac3702

diff --git a/NEWS b/NEWS
index e69de29bb2..add6c1e903 100644
--- a/NEWS
+++ b/NEWS
@@ -0,0 +1,74 @@
+This file includes highlights of the changes made in the
+OpenOCD 0.5.0 source archive release.  See the repository
+history for details about what changed, including bugfixes
+and other issues not mentioned here.
+
+JTAG Layer:
+	New driver for "Bus Pirate"
+	Rename various commands so they're not JTAG-specific
+	   There are migration procedures for most of these, but you should
+	   convert your scripts to the new names, since those procedures
+	   will not be around forever.
+		jtag jinterface ... is now adapter_name
+	   	jtag_khz	... is now adapter_khz
+		jtag_nsrst_delay ... is now adapter_nsrst_delay
+		jtag_nsrst_assert_width ... is now adapter_nsrst_assert_width
+	Support Voipac VPACLink JTAG Adapter.
+
+Boundary Scan:
+
+Transport framework core ... supporting future work for SWD, SPI, and other
+non-JTAG ways to debug targets or program flash.
+
+Target Layer:
+	ARM:
+		- basic semihosting support for ARMv7M.
+		- renamed "armv7m" command prefix as "arm"
+	MIPS:
+		- "ejtag_srst" variant removed. The same functionality is
+		  obtained by using "reset_config none".
+		- added PIC32MX software reset support, this means srst is not
+		  required to be connected anymore.
+	OTHER:
+		- preliminary AVR32 AP7000 support.
+
+Flash Layer:
+	New "stellaris recover" command, implements the procedure
+		to recover locked devices (restoring non-volatile
+		state to the factory defaults, including erasing
+		the flash and its protection bits, and possibly
+		re-enabling hardware debugging).
+	PIC32MX now uses algorithm for flash programming, this
+		has increased the performance by approx 96%.
+	New 'pic32mx unlock' cmd to remove readout protection.
+	New STM32 Value Line Support.
+	New 'virtual' flash driver, used to associate other addresses
+		with a flash bank. See pic32mx.cfg for usage.
+	New iMX27 NAND flash controller driver.
+
+Board, Target, and Interface Configuration Scripts:
+	Support IAR LPC1768 kickstart board (by Olimex)
+	Support Voipac PXA270/PXA270M module.
+	New $PARPORTADDR tcl variable used to change default
+		parallel port address used.
+	Remove lm3s811.cfg; use "stellaris.cfg" instead
+
+Core Jim/TCL Scripting:
+	New "add_script_search_dir" command, behaviour is the same
+		as the "-s" cmd line option.
+
+Documentation:
+
+Build and Release:
+
+For more details about what has changed since the last release,
+see the git repository history.  With gitweb, you can browse that
+in various levels of detail.
+
+For older NEWS, see the NEWS files associated with each release
+(i.e. NEWS-<version>).
+
+For more information about contributing test reports, bug fixes, or new
+features and device support, please read the new Developer Manual (or
+the BUGS and PATCHES.txt files in the source archive).
+