X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=README;h=00e83bbf4aafdf2eaf34adcf8e853c9b8fb6ac67;hp=a9ccd0018d8da0a12aa76818332b749748f380f5;hb=8896abbf07b11869018889ed672f05cf61295aaf;hpb=1338cf60b91c582fa4b27d5226ab4374117be415 diff --git a/README b/README index a9ccd0018d..00e83bbf4a 100644 --- a/README +++ b/README @@ -4,7 +4,7 @@ Welcome to OpenOCD! OpenOCD provides on-chip programming and debugging support with a layered architecture of JTAG interface and TAP support including: -- (X)SVF playback to faciliate automated boundary scan and FPGA/CPLD +- (X)SVF playback to facilitate automated boundary scan and FPGA/CPLD programming; - debug target support (e.g. ARM, MIPS): single-stepping, breakpoints/watchpoints, gprof profiling, etc; @@ -39,10 +39,11 @@ If you are connecting a particular adapter with some specific target, you need to source both the jtag interface and the target configs, e.g.: - openocd -f interface/ftdi/jtagkey2.cfg -f target/ti_calypso.cfg + openocd -f interface/ftdi/jtagkey2.cfg -c "transport select jtag" \ + -f target/ti_calypso.cfg -NB: when using an FTDI-based adapter you should prefer configs in the -ftdi directory; the old configs for the ft2232 are deprecated. + openocd -f interface/stlink.cfg -c "transport select hla_swd" \ + -f target/stm32l0.cfg After OpenOCD startup, connect GDB with @@ -57,10 +58,10 @@ In addition to the in-tree documentation, the latest manuals may be viewed online at the following URLs: OpenOCD User's Guide: - http://openocd.sourceforge.net/doc/html/index.html + http://openocd.org/doc/html/index.html OpenOCD Developer's Manual: - http://openocd.sourceforge.net/doc/doxygen/html/index.html + http://openocd.org/doc/doxygen/html/index.html These reflect the latest development versions, so the following section introduces how to build the complete documentation from the package. @@ -102,12 +103,12 @@ JTAG adapters AICE, ARM-JTAG-EW, ARM-USB-OCD, ARM-USB-TINY, AT91RM9200, axm0432, BCM2835, Bus Blaster, Buspirate, Chameleon, CMSIS-DAP, Cortino, DENX, -DLC 5, DLP-USB1232H, embedded projects, eStick, FlashLINK, FlossJTAG, -Flyswatter, Flyswatter2, Gateworks, Hoegl, ICDI, ICEBear, J-Link, JTAG -VPI, JTAGkey, JTAGkey2, JTAG-lock-pick, KT-Link, Lisa/L, -LPC1768-Stick, MiniModule, NGX, NXHX, OOCDLink, Opendous, OpenJTAG, -Openmoko, OpenRD, OSBDM, Presto, Redbee, RLink, SheevaPlug devkit, -Stellaris evkits, ST-LINK (SWO tracing supported), +Digilent JTAG-SMT2, DLC 5, DLP-USB1232H, embedded projects, eStick, +FlashLINK, FlossJTAG, Flyswatter, Flyswatter2, Gateworks, Hoegl, ICDI, +ICEBear, J-Link, JTAG VPI, JTAGkey, JTAGkey2, JTAG-lock-pick, KT-Link, +Lisa/L, LPC1768-Stick, MiniModule, NGX, NXHX, OOCDLink, Opendous, +OpenJTAG, Openmoko, OpenRD, OSBDM, Presto, Redbee, RLink, SheevaPlug +devkit, Stellaris evkits, ST-LINK (SWO tracing supported), STM32-PerformanceStick, STR9-comStick, sysfsgpio, TUMPA, Turtelizer, ULINK, USB-A9260, USB-Blaster, USB-JTAG, USBprog, VPACLink, VSLLink, Wiggler, XDS100v2, Xverve. @@ -115,17 +116,19 @@ Wiggler, XDS100v2, Xverve. Debug targets ------------- -ARM11, ARM7, ARM9, AVR32, Cortex-A, Cortex-R, Cortex-M, -Feroceon/Dragonite, DSP563xx, DSP5680xx, FA526, MIPS EJTAG, NDS32, -XScale, Intel Quark. +ARM11, ARM7, ARM9, AVR32, Cortex-A, Cortex-R, Cortex-M, LS102x-SAP, +Feroceon/Dragonite, DSP563xx, DSP5680xx, EnSilica eSi-RISC, FA526, MIPS +EJTAG, NDS32, XScale, Intel Quark. Flash drivers ------------- -ADUC702x, AT91SAM, AVR, CFI, DSP5680xx, EFM32, EM357, FM3, Kinetis, -LPC2000, LPC2900, LPCSPIFI, Milandr, NuMicro, PIC32mx, Stellaris, -STM32, STMSMI, STR7x, STR9x; NAND controllers of AT91SAM9, LPC3180, -LPC32xx, i.MX31, MXC, NUC910, Orion/Kirkwood, S3C24xx, S3C6400. +ADUC702x, AT91SAM, ATH79, AVR, CFI, DSP5680xx, EFM32, EM357, eSi-TSMC, FM3, +FM4, Freedom E SPI, Kinetis, LPC8xx/LPC1xxx/LPC2xxx/LPC541xx, LPC2900, +LPCSPIFI, Marvell QSPI, Milandr, NIIET, NuMicro, PIC32mx, PSoC4, PSoC5LP, +SiM3x, Stellaris, STM32, STMSMI, STR7x, STR9x, nRF51; NAND controllers of +AT91SAM9, LPC3180, LPC32xx, i.MX31, MXC, NUC910, Orion/Kirkwood, S3C24xx, +S3C6400, XMC1xxx, XMC4xxx. ================== @@ -179,10 +182,6 @@ suggestions: particular hardware; - Use "ftdi" interface adapter driver for the FTDI-based devices. -As a PACKAGER, never link against the FTD2XX library, as the resulting -binaries can't be legally distributed, due to the restrictions of the -GPL. - ================ Building OpenOCD @@ -216,18 +215,16 @@ You'll also need: Additionally, for building from git: - autoconf >= 2.64 -- automake >= 1.9 +- automake >= 1.14 - texinfo USB-based adapters depend on libusb-1.0 and some older drivers require libusb-0.1 or libusb-compat-0.1. A compatible implementation, such as FreeBSD's, additionally needs the corresponding .pc files. -USB-Blaster, ASIX Presto, OpenJTAG and ft2232 interface adapter -drivers need either one of: +USB-Blaster, ASIX Presto and OpenJTAG interface adapter +drivers need: - libftdi: http://www.intra2net.com/en/developer/libftdi/index.php - - ftd2xx: http://www.ftdichip.com/Drivers/D2XX.htm (proprietary, - GPL-incompatible) CMSIS-DAP support needs HIDAPI library. @@ -237,8 +234,8 @@ Permissions delegation Running OpenOCD with root/administrative permissions is strongly discouraged for security reasons. -For USB devices on GNU/Linux you should use the contrib/openocd.udev -rules file. It probably belongs somewhere in /etc/udev/rules.d, but +For USB devices on GNU/Linux you should use the contrib/60-openocd.rules +file. It probably belongs somewhere in /etc/udev/rules.d, but consult your operating system documentation to be sure. Do not forget to add yourself to the "plugdev" group. @@ -299,40 +296,6 @@ use both the --enable-parport AND the --enable-parport-giveio option if you want to use giveio instead of ioperm parallel port access method. -Using FTDI's FTD2XX -------------------- - -The (closed source) FTDICHIP.COM solution is faster than libftdi on -Windows. That is the motivation for supporting it even though its -licensing restricts it to non-redistributable OpenOCD binaries, and it -is not available for all operating systems used with OpenOCD. You may, -however, build such copies for personal use. - -The FTDICHIP drivers come as either a (win32) ZIP file, or a (Linux) -TAR.GZ file. You must unpack them ``some where'' convenient. As of this -writing FTDICHIP does not supply means to install these files "in an -appropriate place." - -You should use the following ./configure options to make use of -FTD2XX: - - --with-ftd2xx-win32-zipdir - Where (CYGWIN/MINGW) the zip file from ftdichip.com - was unpacked - --with-ftd2xx-linux-tardir - Where (Linux/Unix) the tar file from ftdichip.com - was unpacked - --with-ftd2xx-lib=(static|shared) - Use static or shared ftd2xx libs (default is static) - -Remember, this library is binary-only, while OpenOCD is licenced -according to GNU GPLv2 without any exceptions. That means that -_distributing_ copies of OpenOCD built with the FTDI code would -violate the OpenOCD licensing terms. - -Note that on Linux there is no good reason to use these FTDI binaries; -they are no faster (on Linux) than libftdi, and cause licensing issues. - ========================== Obtaining OpenOCD From GIT