X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=README;h=2ff0329ed29c2c36ed4b1409556a1d3d2c857da3;hp=581082e67dea24cba0176c243ec8cb958fa0ea54;hb=64733434e23d42bfd75932c1e71c39800a5c01e4;hpb=ee4f11dd6822608b60363766646c96c5290ab7ba

diff --git a/README b/README
index 581082e67d..2ff0329ed2 100644
--- a/README
+++ b/README
@@ -42,7 +42,7 @@ e.g.:
   openocd -f interface/ftdi/jtagkey2.cfg -c "transport select jtag" \
           -f target/ti_calypso.cfg
 
-  openocd -f interface/stlink-v2-1.cfg -c "transport select hla_swd" \
+  openocd -f interface/stlink.cfg -c "transport select hla_swd" \
           -f target/stm32l0.cfg
 
 After OpenOCD startup, connect GDB with
@@ -117,17 +117,18 @@ Debug targets
 -------------
 
 ARM11, ARM7, ARM9, AVR32, Cortex-A, Cortex-R, Cortex-M, LS102x-SAP,
-Feroceon/Dragonite, DSP563xx, DSP5680xx, FA526, MIPS EJTAG, NDS32,
-XScale, Intel Quark.
+Feroceon/Dragonite, DSP563xx, DSP5680xx, EnSilica eSi-RISC, FA526, MIPS
+EJTAG, NDS32, XScale, Intel Quark.
 
 Flash drivers
 -------------
 
-ADUC702x, AT91SAM, AVR, CFI, DSP5680xx, EFM32, EM357, FM3, FM4, Kinetis,
-LPC8xx/LPC1xxx/LPC2xxx/LPC541xx, LPC2900, LPCSPIFI, Marvell QSPI,
-Milandr, NIIET, NuMicro, PIC32mx, PSoC4, SiM3x, Stellaris, STM32, STMSMI,
-STR7x, STR9x, nRF51; NAND controllers of AT91SAM9, LPC3180, LPC32xx,
-i.MX31, MXC, NUC910, Orion/Kirkwood, S3C24xx, S3C6400, XMC1xxx, XMC4xxx.
+ADUC702x, AT91SAM, ATH79, AVR, CFI, DSP5680xx, EFM32, EM357, eSi-TSMC, FM3,
+FM4, Freedom E SPI, Kinetis, LPC8xx/LPC1xxx/LPC2xxx/LPC541xx, LPC2900,
+LPCSPIFI, Marvell QSPI, Milandr, NIIET, NuMicro, PIC32mx, PSoC4, PSoC5LP,
+SiM3x, Stellaris, STM32, STMSMI, STR7x, STR9x, nRF51; NAND controllers of
+AT91SAM9, LPC3180, LPC32xx, i.MX31, MXC, NUC910, Orion/Kirkwood, S3C24xx,
+S3C6400, XMC1xxx, XMC4xxx.
 
 
 ==================
@@ -276,7 +277,7 @@ e.g. for cross-building for Windows 32-bit with MinGW on Debian:
 To make pkg-config work nicely for cross-compiling, you might need an
 additional wrapper script as described at
 
-  http://www.flameeyes.eu/autotools-mythbuster/pkgconfig/cross-compiling.html
+  https://autotools.io/pkgconfig/cross-compiling.html
 
 This is needed to tell pkg-config where to look for the target
 libraries that OpenOCD depends on. Alternatively, you can specify