X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=README;h=645ff652ace9087550fa94f5f7e46cf08982da78;hp=a9ccd0018d8da0a12aa76818332b749748f380f5;hb=67332532194b16b99f0535a41b4179ca5df349b0;hpb=1338cf60b91c582fa4b27d5226ab4374117be415

diff --git a/README b/README
index a9ccd0018d..645ff652ac 100644
--- a/README
+++ b/README
@@ -102,12 +102,12 @@ JTAG adapters
 
 AICE, ARM-JTAG-EW, ARM-USB-OCD, ARM-USB-TINY, AT91RM9200, axm0432,
 BCM2835, Bus Blaster, Buspirate, Chameleon, CMSIS-DAP, Cortino, DENX,
-DLC 5, DLP-USB1232H, embedded projects, eStick, FlashLINK, FlossJTAG,
-Flyswatter, Flyswatter2, Gateworks, Hoegl, ICDI, ICEBear, J-Link, JTAG
-VPI, JTAGkey, JTAGkey2, JTAG-lock-pick, KT-Link, Lisa/L,
-LPC1768-Stick, MiniModule, NGX, NXHX, OOCDLink, Opendous, OpenJTAG,
-Openmoko, OpenRD, OSBDM, Presto, Redbee, RLink, SheevaPlug devkit,
-Stellaris evkits, ST-LINK (SWO tracing supported),
+Digilent JTAG-SMT2, DLC 5, DLP-USB1232H, embedded projects, eStick,
+FlashLINK, FlossJTAG, Flyswatter, Flyswatter2, Gateworks, Hoegl, ICDI,
+ICEBear, J-Link, JTAG VPI, JTAGkey, JTAGkey2, JTAG-lock-pick, KT-Link,
+Lisa/L, LPC1768-Stick, MiniModule, NGX, NXHX, OOCDLink, Opendous,
+OpenJTAG, Openmoko, OpenRD, OSBDM, Presto, Redbee, RLink, SheevaPlug
+devkit, Stellaris evkits, ST-LINK (SWO tracing supported),
 STM32-PerformanceStick, STR9-comStick, sysfsgpio, TUMPA, Turtelizer,
 ULINK, USB-A9260, USB-Blaster, USB-JTAG, USBprog, VPACLink, VSLLink,
 Wiggler, XDS100v2, Xverve.
@@ -124,7 +124,7 @@ Flash drivers
 
 ADUC702x, AT91SAM, AVR, CFI, DSP5680xx, EFM32, EM357, FM3, Kinetis,
 LPC2000, LPC2900, LPCSPIFI, Milandr, NuMicro, PIC32mx, Stellaris,
-STM32, STMSMI, STR7x, STR9x; NAND controllers of AT91SAM9, LPC3180,
+STM32, STMSMI, STR7x, STR9x, nRF51; NAND controllers of AT91SAM9, LPC3180,
 LPC32xx, i.MX31, MXC, NUC910, Orion/Kirkwood, S3C24xx, S3C6400.
 
 
@@ -237,8 +237,8 @@ Permissions delegation
 Running OpenOCD with root/administrative permissions is strongly
 discouraged for security reasons.
 
-For USB devices on GNU/Linux you should use the contrib/openocd.udev
-rules file. It probably belongs somewhere in /etc/udev/rules.d, but
+For USB devices on GNU/Linux you should use the contrib/99-openocd.rules
+file. It probably belongs somewhere in /etc/udev/rules.d, but
 consult your operating system documentation to be sure. Do not forget
 to add yourself to the "plugdev" group.