X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=configure.ac;h=1a647475a3dc25db66c64dd0e04a40bc56ade5e7;hp=7adce9eae8f9132a378442a8a6d89fd2260639f3;hb=cc731bda98f40253ebb7e710dd5646ac448f83de;hpb=ceb402dc9e903d2f3f6bc8125dfed9d82b83d2d1

diff --git a/configure.ac b/configure.ac
index 7adce9eae8..1a647475a3 100644
--- a/configure.ac
+++ b/configure.ac
@@ -5,8 +5,7 @@ AC_CONFIG_SRCDIR([src/openocd.c])
 
 m4_include([config_subdir.m4])dnl
 
-AM_INIT_AUTOMAKE([-Wall -Wno-portability dist-bzip2 dist-zip])
-AM_MAINTAINER_MODE
+AM_INIT_AUTOMAKE([-Wall -Wno-portability dist-bzip2 dist-zip subdir-objects])
 
 AC_CONFIG_HEADERS([config.h])
 AH_BOTTOM([
@@ -151,39 +150,6 @@ else
 fi
 AC_MSG_RESULT([$build_release])
 
-# We are not *ALWAYS* being installed in the standard place.
-# We may be installed in a "tool-build" specific location.
-# Normally with other packages - as part of a tool distro.
-# Thus - we should search that 'libdir' also.
-#
-# And - if we are being installed there - the odds are
-# The libraries unique to what we are are there too.
-#
-
-# Expand nd deal with NONE - just like configure will do later
-OCDprefix=$prefix
-OCDxprefix=$exec_prefix
-test x"$OCDprefix"  = xNONE && OCDprefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test x"$OCDxprefix" = xNONE && OCDxprefix="$OCDprefix"
-
-# what matters is the "exec-prefix"
-if test "$OCDxprefix" != "$ac_default_prefix"
-then
-    # We are installing in a non-standard place
-    # Nonstandard --prefix and/or --exec-prefix
-    # We have an override of some sort.
-    # use build specific install library dir
-
-    LDFLAGS="$LDFLAGS -L$OCDxprefix/lib"
-    # RPATH becomes an issue on Linux only
-    if test $host_os = linux-gnu || test $host_os = linux ; then
-      LDFLAGS="$LDFLAGS -Wl,-rpath,$OCDxprefix/lib"
-    fi
-    # The "INCDIR" is also usable
-    CFLAGS="$CFLAGS -I$includedir"
-fi
-
 AC_ARG_WITH(ftd2xx,
    AS_HELP_STRING([--with-ftd2xx=<PATH>],[This option has been removed.]),
   [
@@ -422,11 +388,16 @@ case "${host_cpu}" in
     AC_ARG_ENABLE([at91rm9200],
       AS_HELP_STRING([--enable-at91rm9200], [Enable building support for AT91RM9200 based SBCs]),
       [build_at91rm9200=$enableval], [build_at91rm9200=no])
+
+    AC_ARG_ENABLE([bcm2835gpio],
+      AS_HELP_STRING([--enable-bcm2835gpio], [Enable building support for bitbanging on BCM2835 (as found in Raspberry Pi)]),
+      [build_bcm2835gpio=$enableval], [build_bcm2835gpio=no])
     ;;
 
   *)
     build_ep93xx=no
     build_at91rm9200=no
+    build_bcm2835gpio=no
     ;;
 esac
 
@@ -446,6 +417,14 @@ AC_ARG_ENABLE([usbprog],
   AS_HELP_STRING([--enable-usbprog], [Enable building support for the usbprog JTAG Programmer]),
   [build_usbprog=$enableval], [build_usbprog=no])
 
+AC_ARG_ENABLE([openjtag_ftd2xx],
+  AS_HELP_STRING([--enable-openjtag_ftd2xx], [Enable building support for the OpenJTAG Programmer with ftd2xx driver]),
+  [build_openjtag_ftd2xx=$enableval], [build_openjtag_ftd2xx=no])
+
+AC_ARG_ENABLE([openjtag_ftdi],
+  AS_HELP_STRING([--enable-openjtag_ftdi], [Enable building support for the OpenJTAG Programmer with ftdi driver]),
+  [build_openjtag_ftdi=$enableval], [build_openjtag_ftdi=no])
+
 AC_ARG_ENABLE([oocd_trace],
   AS_HELP_STRING([--enable-oocd_trace],
   [Enable building support for some prototype OpenOCD+trace ETM capture hardware]),
@@ -503,10 +482,6 @@ AC_ARG_ENABLE([internal-jimtcl],
   AS_HELP_STRING([--disable-internal-jimtcl], [Disable building internal jimtcl]),
   [use_internal_jimtcl=$enableval], [use_internal_jimtcl=yes])
 
-AC_ARG_ENABLE([libusb0],
-  AS_HELP_STRING([--enable-libusb0], [Use libusb-0.1 library for USB JTAG devices]),
-  [check_libusb0=$enableval], [check_libusb0=no])
-
 AC_ARG_ENABLE([aice],
   AS_HELP_STRING([--enable-aice], [Enable building support for the Andes JTAG Programmer]),
   [build_aice=$enableval], [build_aice=no])
@@ -668,6 +643,13 @@ else
   AC_DEFINE([BUILD_AT91RM9200], [0], [0 if you don't want at91rm9200.])
 fi
 
+if test $build_bcm2835gpio = yes; then
+  build_bitbang=yes
+  AC_DEFINE([BUILD_BCM2835GPIO], [1], [1 if you want bcm2835gpio.])
+else
+  AC_DEFINE([BUILD_BCM2835GPIO], [0], [0 if you don't want bcm2835gpio.])
+fi
+
 if test x$parport_use_ppdev = xyes; then
   AC_DEFINE([PARPORT_USE_PPDEV], [1], [1 if you want parport to use ppdev.])
 else
@@ -754,6 +736,19 @@ else
   AC_DEFINE([BUILD_USBPROG], [0], [0 if you don't want the usbprog JTAG driver.])
 fi
 
+AC_DEFINE([BUILD_OPENJTAG], [0], [0 if you don't want the OpenJTAG driver.])
+AC_DEFINE([BUILD_OPENJTAG_FTD2XX], [0], [0 if you don't want the OpenJTAG driver with FTD2XX driver.])
+AC_DEFINE([BUILD_OPENJTAG_LIBFTDI], [0], [0 if you don't want to build OpenJTAG driver with libftdi.])
+
+if test $build_openjtag_ftd2xx = yes; then
+  AC_DEFINE([BUILD_OPENJTAG], [1], [1 if you want the OpenJTAG driver.])
+  AC_DEFINE([BUILD_OPENJTAG_FTD2XX], [1], [1 if you want the OpenJTAG driver with FTD2XX driver.])
+fi
+if test $build_openjtag_ftdi = yes; then
+  AC_DEFINE([BUILD_OPENJTAG], [1], [1 if you want the OpenJTAG drvier.])
+  AC_DEFINE([BUILD_OPENJTAG_LIBFTDI], [1], [1 if you want to build OpenJTAG with FTDI driver.])
+fi
+
 if test $build_oocd_trace = yes; then
   AC_DEFINE([BUILD_OOCD_TRACE], [1], [1 if you want the OpenOCD+trace ETM capture driver.])
 else
@@ -849,7 +844,7 @@ then
   AC_MSG_ERROR([The option: with_ftd2xx_linux_tardir is for LINUX only.])
 fi
 
-if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes -o $build_usb_blaster_ftd2xx = yes ; then
+if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes -o $build_usb_blaster_ftd2xx = yes -o $build_openjtag_ftd2xx = yes; then
   AC_MSG_CHECKING([for ftd2xx.lib exists (win32)])
 
   # if we are given a zipdir...
@@ -919,7 +914,7 @@ then
    AC_MSG_ERROR([The option: --with-ftd2xx-win32-zipdir is for win32 only])
 fi
 
-if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes -o $build_usb_blaster_ftd2xx = yes ; then
+if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes -o $build_usb_blaster_ftd2xx = yes -o $build_openjtag_ftd2xx = yes; then
    # Must be linux
    if test $host_os != linux-gnu && test $host_os != linux ; then
       AC_MSG_ERROR([The (linux) ftd2xx library from FTDICHIP.com is linux only. Try --enable-ft2232-libftdi instead])
@@ -1066,7 +1061,8 @@ LDFLAGS=$LDFLAGS_SAVE
 CFLAGS=$CFLAGS_SAVE
 fi
 
-if test $build_ft2232_libftdi = yes -o $build_usb_blaster_libftdi = yes; then
+if test $build_ft2232_libftdi = yes -o $build_usb_blaster_libftdi = yes -o \
+  $build_openjtag_ftdi = yes; then
   # We assume: the package is preinstalled in the proper place
   # these present as 2 libraries..
   LIBS="$LIBS -lftdi -lusb"
@@ -1098,7 +1094,8 @@ if test $build_ft2232_libftdi = yes -o $build_usb_blaster_libftdi = yes; then
     ], [
       AC_MSG_ERROR([Cannot build & run test program using libftdi])
     ], [
-      AC_MSG_RESULT([Skipping as we are cross-compiling])
+      AC_MSG_RESULT([Skipping as we are cross-compiling, trying build only])
+      AC_SEARCH_LIBS([ftdi_new], [], [], [AC_MSG_ERROR([Cannot link with libftdi])])
     ])
 
 AC_MSG_CHECKING([for libftdi highspeed device support])
@@ -1144,37 +1141,53 @@ enum ftdi_chip_type x = TYPE_232H;
   CFLAGS=$CFLAGS_SAVE
 fi
 
-# check for usb.h when a driver will require it
-build_usb=no
+# check if some driver requires libusb-0.1
+need_usb0=no
 if test $build_vsllink = yes -o $build_usbprog = yes -o \
-  $build_rlink = yes -o $build_ulink = yes -o $build_armjtagew = yes -o \
-  $build_aice = yes
-then
-  build_usb=yes
+        $build_rlink = yes -o $build_armjtagew = yes; then
+  need_usb0=yes
 fi
 
-# Check for libusb1 ported drivers.
-build_usb_ng=no
-if test $build_jlink = yes -o $build_hladapter_stlink = yes -o $build_osbdm = yes -o \
-  $build_opendous = yes -o $build_ftdi = yes -o $build_hladapter_icdi = yes
-then
-  build_usb_ng=yes
+# check if some driver can work with either libusb version
+need_usb=no
+if test $build_jlink = yes -o $build_osbdm = yes -o $build_opendous = yes -o \
+	$build_aice = yes; then
+  need_usb=yes
+fi
+
+# check if some driver requires libusb-1.x
+need_usb_ng=no
+if test $build_ftdi = yes -o $build_hladapter_icdi = yes -o \
+        $build_hladapter_stlink = yes -o $build_ulink = yes; then
+  need_usb_ng=yes
 fi
 
 # check for libusb library if necessary
-use_libusb0=no
 use_libusb1=no
-if test $build_usb = yes -o $build_usb_ng = yes; then
-  if test $check_libusb0 = no -a $build_usb_ng = yes; then
-	AC_CHECK_HEADER([libusb-1.0/libusb.h],
-			[AC_DEFINE(HAVE_LIBUSB1, 1, [Define if you have libusb-1.0]) check_libusb0=no use_libusb1=yes ],
-			[ check_libusb0=yes use_libusb1=no ])
-  fi
+if test $need_usb = yes -o $need_usb_ng = yes; then
+  AC_CHECK_HEADER([libusb-1.0/libusb.h], [
+	AC_DEFINE([HAVE_LIBUSB1], [1], [Define if you have libusb-1.x])
+	use_libusb1=yes
+	AC_SEARCH_LIBS([libusb_error_name], [usb-1.0],
+		[AC_DEFINE([HAVE_LIBUSB_ERROR_NAME], [1], [Define if your libusb has libusb_error_name()])],
+		[AC_MSG_WARN([libusb-1.x older than 1.0.9 detected, consider updating])])
+  ], [
+	if test $need_usb_ng = yes; then
+	  AC_MSG_ERROR([libusb-1.x is required for some driver(s) you've selected])
+	else
+	  AC_MSG_WARN([Trying legacy libusb-0.1 as a fallback, consider installing libusb-1 instead])
+	  need_usb0=yes
+	fi
+  ])
+fi
 
-  if test $check_libusb0 = yes -o $build_usb = yes; then
-	AC_CHECK_HEADERS([usb.h], [use_libusb0=yes],
-			[AC_MSG_ERROR([libusb or libusb-1.0 are required to build some OpenOCD driver(s)])])
-  fi
+use_libusb0=no
+if test $need_usb0 = yes; then
+	AC_CHECK_HEADERS([usb.h], [
+			use_libusb0=yes
+		], [
+			AC_MSG_ERROR([libusb-0.1 is required to build some OpenOCD driver(s)])
+		])
 fi
 
 AM_CONDITIONAL([RELEASE], [test $build_release = yes])
@@ -1186,6 +1199,7 @@ AM_CONDITIONAL([ZY1000], [test $build_zy1000 = yes])
 AM_CONDITIONAL([ZY1000_MASTER], [test $build_zy1000_master = yes])
 AM_CONDITIONAL([IOUTIL], [test $build_ioutil = yes])
 AM_CONDITIONAL([AT91RM9200], [test $build_at91rm9200 = yes])
+AM_CONDITIONAL([BCM2835GPIO], [test $build_bcm2835gpio = yes])
 AM_CONDITIONAL([BITBANG], [test $build_bitbang = yes])
 AM_CONDITIONAL([FT2232_LIBFTDI], [test $build_ft2232_libftdi = yes])
 AM_CONDITIONAL([FT2232_DRIVER], [test $build_ft2232_ftd2xx = yes -o $build_ft2232_libftdi = yes])
@@ -1198,6 +1212,7 @@ AM_CONDITIONAL([GW16012], [test $build_gw16012 = yes])
 AM_CONDITIONAL([PRESTO_LIBFTDI], [test $build_presto_libftdi = yes])
 AM_CONDITIONAL([PRESTO_DRIVER], [test $build_presto_ftd2xx = yes -o $build_presto_libftdi = yes])
 AM_CONDITIONAL([USBPROG], [test $build_usbprog = yes])
+AM_CONDITIONAL([OPENJTAG], [test $build_openjtag_ftd2xx = yes -o $build_openjtag_ftdi = yes])
 AM_CONDITIONAL([OOCD_TRACE], [test $build_oocd_trace = yes])
 AM_CONDITIONAL([JLINK], [test $build_jlink = yes])
 AM_CONDITIONAL([AICE], [test $build_aice = yes])
@@ -1211,17 +1226,15 @@ AM_CONDITIONAL([HLADAPTER], [test $build_hladapter_stlink = yes -o $build_hladap
 AM_CONDITIONAL([OSBDM], [test $build_osbdm = yes])
 AM_CONDITIONAL([OPENDOUS], [test $build_opendous = yes])
 AM_CONDITIONAL([SYSFSGPIO], [test $build_sysfsgpio = yes])
-AM_CONDITIONAL([USB], [test $build_usb = yes])
-AM_CONDITIONAL([USB_NG], [test $build_usb_ng = yes])
 AM_CONDITIONAL([USE_LIBUSB0], [test $use_libusb0 = yes])
 AM_CONDITIONAL([USE_LIBUSB1], [test $use_libusb1 = yes])
 AM_CONDITIONAL([IS_CYGWIN], [test $is_cygwin = yes])
-AM_CONDITIONAL([IS_MINGW], [test $is_mingw = ye]s)
-AM_CONDITIONAL([IS_WIN32], [test $is_win32 = ye]s)
-AM_CONDITIONAL([IS_DARWIN], [test $is_darwin = ye]s)
+AM_CONDITIONAL([IS_MINGW], [test $is_mingw = yes])
+AM_CONDITIONAL([IS_WIN32], [test $is_win32 = yes])
+AM_CONDITIONAL([IS_DARWIN], [test $is_darwin = yes])
 AM_CONDITIONAL([BITQ], [test $build_bitq = yes])
 
-AM_CONDITIONAL([MINIDRIVER], [test $build_minidriver = ye]s)
+AM_CONDITIONAL([MINIDRIVER], [test $build_minidriver = yes])
 AM_CONDITIONAL([MINIDRIVER_DUMMY], [test $build_minidriver_dummy = yes])
 
 AM_CONDITIONAL([INTERNAL_JIMTCL], [test $use_internal_jimtcl = yes])