X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=configure.in;h=20d3c02e1b12220825c8b99d67044235153c7aa1;hp=7111b82adbda987e188400674064eded884a79e0;hb=91d21d22ca26d4c103c0a60f1f937283597302bc;hpb=4b97f3cbb9603c13f69f8d3b5371c12045593126

diff --git a/configure.in b/configure.in
index 7111b82adb..20d3c02e1b 100644
--- a/configure.in
+++ b/configure.in
@@ -15,6 +15,7 @@ AC_CHECK_FUNCS(gettimeofday)
 AC_CHECK_FUNCS(usleep)
 
 build_bitbang=no
+build_bitq=no
 is_cygwin=no
 is_mingw=no
 is_win32=no
@@ -23,9 +24,16 @@ AC_ARG_ENABLE(parport,
   AS_HELP_STRING([--enable-parport], [Enable building the pc parallel port driver]), 
   [build_parport=$enableval], [build_parport=no])
 
-AC_ARG_ENABLE(parport_ppdev,
-  AS_HELP_STRING([--enable-parport_ppdev], [Enable use of ppdev (/dev/parportN) for parport]), 
-  [parport_use_ppdev=$enableval], [parport_use_ppdev=no])
+case "${host_cpu}" in 
+  i?86|x86*)
+    AC_ARG_ENABLE(parport_ppdev,
+      AS_HELP_STRING([--enable-parport_ppdev], [Enable use of ppdev (/dev/parportN) for parport]), 
+      [parport_use_ppdev=$enableval], [parport_use_ppdev=no])
+    ;;
+  *) 
+    parport_use_ppdev=yes
+    ;;
+esac
 
 AC_ARG_ENABLE(ft2232_libftdi,
   AS_HELP_STRING([--enable-ft2232_libftdi], [Enable building support for FT2232 based devices using the libftdi driver]), 
@@ -51,6 +59,18 @@ AC_ARG_ENABLE(gw16012,
   AS_HELP_STRING([--enable-gw16012], [Enable building support for the Gateworks GW16012 JTAG Programmer]),
   [build_gw16012=$enableval], [build_gw16012=no])
 
+AC_ARG_ENABLE(presto,
+  AS_HELP_STRING([--enable-presto], [Enable building support for ASIX Presto Programmer]),
+  [build_presto=$enableval], [build_presto=no])
+
+AC_ARG_ENABLE(usbprog,
+  AS_HELP_STRING([--enable-usbprog], [Enable building support for the usbprog JTAG Programmer]),
+  [build_usbprog=$enableval], [build_usbprog=no])
+
+AC_ARG_ENABLE(oocd_trace,
+  AS_HELP_STRING([--enable-oocd_trace], [Enable building support for the OpenOCD+trace ETM capture device]),
+  [build_oocd_trace=$enableval], [build_oocd_trace=no])
+
 AC_ARG_WITH(ftd2xx,
         [AS_HELP_STRING(--with-ftd2xx,
            [Where libftd2xx can be found <default=search>])],
@@ -156,6 +176,31 @@ else
   AC_DEFINE(BUILD_GW16012, 0, [0 if you don't want the Gateworks GW16012 driver.])
 fi
 
+if test $build_presto = yes; then
+  build_bitq=yes
+  AC_DEFINE(BUILD_PRESTO, 1, [1 if you want the ASIX PRESTO driver.])
+else
+  AC_DEFINE(BUILD_PRESTO, 0, [0 if you don't want the ASIX PRESTO driver.])
+fi
+
+if test $build_bitq = yes; then
+  AC_DEFINE(BUILD_BITQ, 1, [1 if you want a bitq interface.])
+else
+  AC_DEFINE(BUILD_BITQ, 0, [0 if you don't want a bitq interface.])
+fi
+
+if test $build_usbprog = yes; then
+  AC_DEFINE(BUILD_USBPROG, 1, [1 if you want the usbprog JTAG driver.])
+else
+  AC_DEFINE(BUILD_USBPROG, 0, [0 if you don't want the usbprog JTAG driver.])
+fi
+
+if test $build_oocd_trace = yes; then
+  AC_DEFINE(BUILD_OOCD_TRACE, 1, [1 if you want the OpenOCD+trace ETM capture driver.])
+else
+  AC_DEFINE(BUILD_OOCD_TRACE, 0, [0 if you don't want the OpenOCD+trace ETM capture driver.])
+fi
+
 AM_CONFIG_HEADER(config.h)
 AM_INIT_AUTOMAKE(openocd, 0.1)
 
@@ -168,10 +213,14 @@ AM_CONDITIONAL(FT2232_LIBFTDI, test $build_ft2232_libftdi = yes)
 AM_CONDITIONAL(FT2232_FTD2XX, test $build_ft2232_ftd2xx = yes)
 AM_CONDITIONAL(AMTJTAGACCEL, test $build_amtjtagaccel = yes)
 AM_CONDITIONAL(GW16012, test $build_gw16012 = yes)
+AM_CONDITIONAL(PRESTO, test $build_presto = yes)
+AM_CONDITIONAL(USBPROG, test $build_usbprog = yes)
+AM_CONDITIONAL(OOCD_TRACE, test $build_oocd_trace = yes)
 AM_CONDITIONAL(IS_CYGWIN, test $is_cygwin = yes)
 AM_CONDITIONAL(IS_MINGW, test $is_mingw = yes)
 AM_CONDITIONAL(IS_WIN32, test $is_win32 = yes)
 AM_CONDITIONAL(FTD2XXDIR, test $with_ftd2xx != search)
+AM_CONDITIONAL(BITQ, test $build_bitq = yes)
 
 AC_LANG_C
 AC_PROG_CC