X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=doc%2Fopenocd.texi;h=329b705947bf50621426445a9c781a3175a19605;hp=24d4a8994786ee13ca478d26b69185c9d5438814;hb=bdc71c5252995d55298ba7bba49adec074104619;hpb=a0a504569b5ae4d6e485414c43be0fd4bb216bab

diff --git a/doc/openocd.texi b/doc/openocd.texi
index 24d4a89947..329b705947 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -4715,9 +4715,10 @@ each block, and the specified length must stay within that bank.
 @end deffn
 @comment no current checks for errors if fill blocks touch multiple banks!
 
-@deffn Command {flash write_bank} num filename offset
+@deffn Command {flash write_bank} num filename [offset]
 Write the binary @file{filename} to flash bank @var{num},
-starting at @var{offset} bytes from the beginning of the bank.
+starting at @var{offset} bytes from the beginning of the bank. If @var{offset}
+is omitted, start at the beginning of the flash bank.
 The @var{num} parameter is a value shown by @command{flash banks}.
 @end deffn
 
@@ -5368,10 +5369,21 @@ recognizes flash size and a number of flash banks (1-4) using the chip
 identification register, and autoconfigures itself.
 Use kinetis_ke driver for KE0x devices.
 
+The @var{kinetis} driver defines option:
+@itemize
+@item -sim-base @var{addr} ... base of System Integration Module where chip identification resides. Driver tries two known locations if option is omitted.
+@end itemize
+
 @example
 flash bank $_FLASHNAME kinetis 0 0 0 0 $_TARGETNAME
 @end example
 
+@deffn Command {kinetis create_banks}
+Configuration command enables automatic creation of additional flash banks
+based on real flash layout of device. Banks are created during device probe.
+Use 'flash probe 0' to force probe.
+@end deffn
+
 @deffn Command {kinetis fcf_source} [protection|write]
 Select what source is used when writing to a Flash Configuration Field.
 @option{protection} mode builds FCF content from protection bits previously
@@ -5448,10 +5460,11 @@ Command disables watchdog timer.
 
 @deffn {Flash Driver} kinetis_ke
 @cindex kinetis_ke
-KE members of the Kinetis microcontroller family from Freescale include
+KE0x members of the Kinetis microcontroller family from Freescale include
 internal flash and use ARM Cortex-M0+. The driver automatically recognizes
-the KE family and sub-family using the chip identification register, and
+the KE0x sub-family using the chip identification register, and
 autoconfigures itself.
+Use kinetis (not kinetis_ke) driver for KE1x devices.
 
 @example
 flash bank $_FLASHNAME kinetis_ke 0 0 0 0 $_TARGETNAME