X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=doc%2Fopenocd.texi;h=40b3c5d1dd03f664a9bf0bf4968b61c1136fdd94;hp=b03da4f832b28eebceade27429cc59a703f6a4a2;hb=b25e5322eea66eb76232da06fa435d2f11097c86;hpb=bb2767721945fa3496f777aa95eaab0137795137

diff --git a/doc/openocd.texi b/doc/openocd.texi
index b03da4f832..40b3c5d1dd 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -2543,27 +2543,27 @@ and a specific set of GPIOs is used.
 ARM CMSIS-DAP compliant based adapter v1 (USB HID based)
 or v2 (USB bulk).
 
-@deffn {Config Command} {cmsis_dap_vid_pid} [vid pid]+
+@deffn {Config Command} {cmsis-dap vid_pid} [vid pid]+
 The vendor ID and product ID of the CMSIS-DAP device. If not specified
 the driver will attempt to auto detect the CMSIS-DAP device.
 Currently, up to eight [@var{vid}, @var{pid}] pairs may be given, e.g.
 @example
-cmsis_dap_vid_pid 0xc251 0xf001 0x0d28 0x0204
+cmsis-dap vid_pid 0xc251 0xf001 0x0d28 0x0204
 @end example
 @end deffn
 
-@deffn {Config Command} {cmsis_dap_backend} [@option{auto}|@option{usb_bulk}|@option{hid}]
+@deffn {Config Command} {cmsis-dap backend} [@option{auto}|@option{usb_bulk}|@option{hid}]
 Specifies how to communicate with the adapter:
 
 @itemize @minus
 @item @option{hid} Use HID generic reports - CMSIS-DAP v1
 @item @option{usb_bulk} Use USB bulk - CMSIS-DAP v2
 @item @option{auto} First try USB bulk CMSIS-DAP v2, if not found try HID CMSIS-DAP v1.
-This is the default if @command{cmsis_dap_backend} is not specified.
+This is the default if @command{cmsis-dap backend} is not specified.
 @end itemize
 @end deffn
 
-@deffn {Config Command} {cmsis_dap_usb interface} [number]
+@deffn {Config Command} {cmsis-dap usb interface} [number]
 Specifies the @var{number} of the USB interface to use in v2 mode (USB bulk).
 In most cases need not to be specified and interfaces are searched by
 interface string or for user class interface.