X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=doc%2Fopenocd.texi;h=8d0ce620ce76e819880d41fc3f8d965277f4c219;hp=b56efb8a1e43d5062fb5f1f5bf719ed0ac9e4f2f;hb=bb3793c9a4ccd232c4ee3ce0a36bf200589ca0bb;hpb=7d48be5bd3705b8771f49427824bb421ebf9677e diff --git a/doc/openocd.texi b/doc/openocd.texi index b56efb8a1e..8d0ce620ce 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -309,7 +309,7 @@ RTCK support? Also known as ``adaptive clocking'' @section Stand alone Systems -@b{ZY1000} See: @url{http://www.zylin.com/zy1000.html} Technically, not a +@b{ZY1000} See: @url{http://www.ultsol.com/index.php/component/content/article/8/33-zylin-zy1000-jtag-probe} Technically, not a dongle, but a standalone box. The ZY1000 has the advantage that it does not require any drivers installed on the developer PC. It also has a built in web interface. It supports RTCK/RCLK or adaptive clocking @@ -336,7 +336,7 @@ a built-in low cost debug adapter and usb-to-serial solution. @itemize @bullet @item @b{usbjtag} -@* Link @url{http://www.hs-augsburg.de/~hhoegl/proj/usbjtag/usbjtag.html} +@* Link @url{http://elk.informatik.fh-augsburg.de/hhweb/doc/openocd/usbjtag/usbjtag.html} @item @b{jtagkey} @* See: @url{http://www.amontec.com/jtagkey.shtml} @item @b{jtagkey2} @@ -358,7 +358,7 @@ Evaluation Kits. Like the non-detachable FT2232 support on the other Stellaris eval boards, they can be used to debug other target boards. @item @b{olimex-jtag} @* See: @url{http://www.olimex.com} -@item @b{flyswatter} +@item @b{Flyswatter/Flyswatter2} @* See: @url{http://www.tincantools.com} @item @b{turtelizer2} @* See: @@ -369,11 +369,14 @@ Stellaris eval boards, they can be used to debug other target boards. @item @b{stm32stick} @* Link @url{http://www.hitex.com/stm32-stick} @item @b{axm0432_jtag} -@* Axiom AXM-0432 Link @url{http://www.axman.com} +@* Axiom AXM-0432 Link @url{http://www.axman.com} - NOTE: This JTAG does not appear +to be available anymore as of April 2012. @item @b{cortino} @* Link @url{http://www.hitex.com/index.php?id=cortino} @item @b{dlp-usb1232h} @* Link @url{http://www.dlpdesign.com/usb/usb1232h.shtml} +@item @b{digilent-hs1} +@* Link @url{http://www.digilentinc.com/Products/Detail.cfm?Prod=JTAG-HS1} @end itemize @section USB-JTAG / Altera USB-Blaster compatibles @@ -390,7 +393,7 @@ product. The driver can be configured to search for any VID/PID pair @itemize @item @b{USB-JTAG} Kolja Waschk's USB Blaster-compatible adapter -@* Link: @url{http://www.ixo.de/info/usb_jtag/} +@* Link: @url{http://ixo-jtag.sourceforge.net/} @item @b{Altera USB-Blaster} @* Link: @url{http://www.altera.com/literature/ug/ug_usb_blstr.pdf} @end itemize @@ -406,7 +409,7 @@ AT91SAM764 internally. @item @b{SEGGER JLINK} @* Link: @url{http://www.segger.com/jlink.html} @item @b{IAR J-Link} -@* Link: @url{http://www.iar.com/website1/1.0.1.0/369/1/index.php} +@* Link: @url{http://www.iar.com/en/products/hardware-debug-probes/iar-j-link/} @end itemize @section USB RLINK based @@ -414,7 +417,7 @@ Raisonance has an adapter called @b{RLink}. It exists in a stripped-down form o @itemize @bullet @item @b{Raisonance RLink} -@* Link: @url{http://www.raisonance.com/products/RLink.php} +@* Link: @url{http://www.mcu-raisonance.com/~rlink-debugger-programmer__microcontrollers__tool~tool__T018:4cn9ziz4bnx6.html} @item @b{STM32 Primer} @* Link: @url{http://www.stm32circle.com/resources/stm32primer.php} @item @b{STM32 Primer2} @@ -423,7 +426,7 @@ Raisonance has an adapter called @b{RLink}. It exists in a stripped-down form o @section USB ST-LINK based ST Micro has an adapter called @b{ST-LINK}. -They only works with ST Micro chips, notably STM32 and STM8. +They only work with ST Micro chips, notably STM32 and STM8. @itemize @bullet @item @b{ST-LINK} @@ -436,7 +439,7 @@ They only works with ST Micro chips, notably STM32 and STM8. For info the original ST-LINK enumerates using the mass storage usb class, however it's implementation is completely broken. The result is this causes issues under linux. -The simplest solution is to get linux to ignore the ST-LINK using one of the following method's: +The simplest solution is to get linux to ignore the ST-LINK using one of the following methods: @itemize @bullet @item modprobe -r usb-storage && modprobe usb-storage quirks=483:3744:i @item add "options usb-storage quirks=483:3744:i" to /etc/modprobe.conf @@ -445,25 +448,31 @@ The simplest solution is to get linux to ignore the ST-LINK using one of the fol @section USB Other @itemize @bullet @item @b{USBprog} -@* Link: @url{http://www.embedded-projects.net/usbprog} - which uses an Atmel MEGA32 and a UBN9604 +@* Link: @url{http://shop.embedded-projects.net/} - which uses an Atmel MEGA32 and a UBN9604 @item @b{USB - Presto} @* Link: @url{http://tools.asix.net/prg_presto.htm} @item @b{Versaloon-Link} -@* Link: @url{http://www.simonqian.com/en/Versaloon} +@* Link: @url{http://www.versaloon.com} @item @b{ARM-JTAG-EW} @* Link: @url{http://www.olimex.com/dev/arm-jtag-ew.html} @item @b{Buspirate} @* Link: @url{http://dangerousprototypes.com/bus-pirate-manual/} + +@item @b{opendous} +@* Link: @url{http://code.google.com/p/opendous-jtag/} + +@item @b{estick} +@* Link: @url{http://code.google.com/p/estick-jtag/} @end itemize @section IBM PC Parallel Printer Port Based The two well known ``JTAG Parallel Ports'' cables are the Xilnx DLC5 -and the MacGraigor Wiggler. There are many clones and variations of +and the Macraigor Wiggler. There are many clones and variations of these on the market. Note that parallel ports are becoming much less common, so if you @@ -486,8 +495,7 @@ produced, PDF schematics are easily found and it is easy to make. @* Link: @url{http://www.gateworks.com/products/avila_accessories/gw16042.php} @item @b{Wiggler2} -@*@uref{http://www.ccac.rwth-aachen.de/@/~michaels/@/index.php/hardware/@/armjtag, -Improved parallel-port wiggler-style JTAG adapter} +@* Link: @url{http://www.ccac.rwth-aachen.de/~michaels/index.php/hardware/armjtag} @item @b{Wiggler_ntrst_inverted} @* Yet another variation - See the source code, src/jtag/parport.c @@ -510,8 +518,7 @@ Improved parallel-port wiggler-style JTAG adapter} @item @b{flashlink} @* From ST Microsystems; -@uref{http://www.st.com/stonline/@/products/literature/um/7889.pdf, -FlashLINK JTAG programing cable for PSD and uPSD} +@* Link: @url{http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATA_BRIEF/DM00039500.pdf} @end itemize @@ -1224,17 +1231,30 @@ These are for debug adapters. Files that configure JTAG adapters go here. @example $ ls interface -arm-jtag-ew.cfg hitex_str9-comstick.cfg oocdlink.cfg -arm-usb-ocd.cfg icebear.cfg openocd-usb.cfg -at91rm9200.cfg jlink.cfg parport.cfg -axm0432.cfg jtagkey2.cfg parport_dlc5.cfg -calao-usb-a9260-c01.cfg jtagkey.cfg rlink.cfg -calao-usb-a9260-c02.cfg jtagkey-tiny.cfg sheevaplug.cfg -calao-usb-a9260.cfg luminary.cfg signalyzer.cfg -chameleon.cfg luminary-icdi.cfg stm32-stick.cfg -cortino.cfg luminary-lm3s811.cfg turtelizer2.cfg -dummy.cfg olimex-arm-usb-ocd.cfg usbprog.cfg -flyswatter.cfg olimex-jtag-tiny.cfg vsllink.cfg +altera-usb-blaster.cfg hilscher_nxhx50_etm.cfg openrd.cfg +arm-jtag-ew.cfg hilscher_nxhx50_re.cfg osbdm.cfg +arm-usb-ocd.cfg hitex_str9-comstick.cfg parport.cfg +at91rm9200.cfg icebear.cfg parport_dlc5.cfg +axm0432.cfg jlink.cfg redbee-econotag.cfg +busblaster.cfg jtagkey2.cfg redbee-usb.cfg +buspirate.cfg jtagkey2p.cfg rlink.cfg +calao-usb-a9260-c01.cfg jtagkey.cfg sheevaplug.cfg +calao-usb-a9260-c02.cfg jtagkey-tiny.cfg signalyzer.cfg +calao-usb-a9260.cfg kt-link.cfg signalyzer-h2.cfg +chameleon.cfg lisa-l.cfg signalyzer-h4.cfg +cortino.cfg luminary.cfg signalyzer-lite.cfg +digilent-hs1.cfg luminary-icdi.cfg stlink-v1.cfg +dlp-usb1232h.cfg luminary-lm3s811.cfg stlink-v2.cfg +dummy.cfg minimodule.cfg stm32-stick.cfg +estick.cfg neodb.cfg turtelizer2.cfg +flashlink.cfg ngxtech.cfg ulink.cfg +flossjtag.cfg olimex-arm-usb-ocd.cfg usb-jtag.cfg +flossjtag-noeeprom.cfg olimex-arm-usb-ocd-h.cfg usbprog.cfg +flyswatter2.cfg olimex-arm-usb-tiny-h.cfg vpaclink.cfg +flyswatter.cfg olimex-jtag-tiny.cfg vsllink.cfg +hilscher_nxhx10_etm.cfg oocdlink.cfg xds100v2.cfg +hilscher_nxhx500_etm.cfg opendous.cfg +hilscher_nxhx500_re.cfg openocd-usb.cfg $ @end example @item @file{board} ... @@ -1250,32 +1270,72 @@ board file. Boards may also contain multiple targets: two CPUs; or a CPU and an FPGA. @example $ ls board -arm_evaluator7t.cfg keil_mcb1700.cfg -at91rm9200-dk.cfg keil_mcb2140.cfg -at91sam9g20-ek.cfg linksys_nslu2.cfg -atmel_at91sam7s-ek.cfg logicpd_imx27.cfg -atmel_at91sam9260-ek.cfg mini2440.cfg -atmel_sam3u_ek.cfg olimex_LPC2378STK.cfg -crossbow_tech_imote2.cfg olimex_lpc_h2148.cfg -csb337.cfg olimex_sam7_ex256.cfg -csb732.cfg olimex_sam9_l9260.cfg -digi_connectcore_wi-9c.cfg olimex_stm32_h103.cfg -dm355evm.cfg omap2420_h4.cfg -dm365evm.cfg osk5912.cfg -dm6446evm.cfg pic-p32mx.cfg -eir.cfg propox_mmnet1001.cfg -ek-lm3s1968.cfg pxa255_sst.cfg -ek-lm3s3748.cfg sheevaplug.cfg -ek-lm3s811.cfg stm3210e_eval.cfg -ek-lm3s9b9x.cfg stm32f10x_128k_eval.cfg -hammer.cfg str910-eval.cfg -hitex_lpc2929.cfg telo.cfg -hitex_stm32-performancestick.cfg ti_beagleboard.cfg -hitex_str9-comstick.cfg topas910.cfg -iar_str912_sk.cfg topasa900.cfg -imx27ads.cfg unknown_at91sam9260.cfg -imx27lnst.cfg x300t.cfg -imx31pdk.cfg zy1000.cfg +actux3.cfg logicpd_imx27.cfg +am3517evm.cfg lubbock.cfg +arm_evaluator7t.cfg mcb1700.cfg +at91cap7a-stk-sdram.cfg microchip_explorer16.cfg +at91eb40a.cfg mini2440.cfg +at91rm9200-dk.cfg mini6410.cfg +at91rm9200-ek.cfg olimex_LPC2378STK.cfg +at91sam9261-ek.cfg olimex_lpc_h2148.cfg +at91sam9263-ek.cfg olimex_sam7_ex256.cfg +at91sam9g20-ek.cfg olimex_sam9_l9260.cfg +atmel_at91sam7s-ek.cfg olimex_stm32_h103.cfg +atmel_at91sam9260-ek.cfg olimex_stm32_h107.cfg +atmel_at91sam9rl-ek.cfg olimex_stm32_p107.cfg +atmel_sam3n_ek.cfg omap2420_h4.cfg +atmel_sam3s_ek.cfg open-bldc.cfg +atmel_sam3u_ek.cfg openrd.cfg +atmel_sam3x_ek.cfg osk5912.cfg +atmel_sam4s_ek.cfg phytec_lpc3250.cfg +balloon3-cpu.cfg pic-p32mx.cfg +colibri.cfg propox_mmnet1001.cfg +crossbow_tech_imote2.cfg pxa255_sst.cfg +csb337.cfg redbee.cfg +csb732.cfg rsc-w910.cfg +da850evm.cfg sheevaplug.cfg +digi_connectcore_wi-9c.cfg smdk6410.cfg +diolan_lpc4350-db1.cfg spear300evb.cfg +dm355evm.cfg spear300evb_mod.cfg +dm365evm.cfg spear310evb20.cfg +dm6446evm.cfg spear310evb20_mod.cfg +efikamx.cfg spear320cpu.cfg +eir.cfg spear320cpu_mod.cfg +ek-lm3s1968.cfg steval_pcc010.cfg +ek-lm3s3748.cfg stm320518_eval_stlink.cfg +ek-lm3s6965.cfg stm32100b_eval.cfg +ek-lm3s811.cfg stm3210b_eval.cfg +ek-lm3s811-revb.cfg stm3210c_eval.cfg +ek-lm3s9b9x.cfg stm3210e_eval.cfg +ek-lm4f232.cfg stm3220g_eval.cfg +embedded-artists_lpc2478-32.cfg stm3220g_eval_stlink.cfg +ethernut3.cfg stm3241g_eval.cfg +glyn_tonga2.cfg stm3241g_eval_stlink.cfg +hammer.cfg stm32f0discovery.cfg +hilscher_nxdb500sys.cfg stm32f4discovery.cfg +hilscher_nxeb500hmi.cfg stm32ldiscovery.cfg +hilscher_nxhx10.cfg stm32vldiscovery.cfg +hilscher_nxhx500.cfg str910-eval.cfg +hilscher_nxhx50.cfg telo.cfg +hilscher_nxsb100.cfg ti_beagleboard.cfg +hitex_lpc2929.cfg ti_beagleboard_xm.cfg +hitex_stm32-performancestick.cfg ti_beaglebone.cfg +hitex_str9-comstick.cfg ti_blaze.cfg +iar_lpc1768.cfg ti_pandaboard.cfg +iar_str912_sk.cfg ti_pandaboard_es.cfg +icnova_imx53_sodimm.cfg topas910.cfg +icnova_sam9g45_sodimm.cfg topasa900.cfg +imx27ads.cfg twr-k60n512.cfg +imx27lnst.cfg tx25_stk5.cfg +imx28evk.cfg tx27_stk5.cfg +imx31pdk.cfg unknown_at91sam9260.cfg +imx35pdk.cfg uptech_2410.cfg +imx53loco.cfg verdex.cfg +keil_mcb1700.cfg voipac.cfg +keil_mcb2140.cfg voltcraft_dso-3062c.cfg +kwikstik.cfg x300t.cfg +linksys_nslu2.cfg zy1000.cfg +lisa-l.cfg $ @end example @item @file{target} ... @@ -1287,32 +1347,71 @@ When a chip has multiple TAPs (maybe it has both ARM and DSP cores), the target config file defines all of them. @example $ ls target -aduc702x.cfg imx27.cfg pxa255.cfg -ar71xx.cfg imx31.cfg pxa270.cfg -at91eb40a.cfg imx35.cfg readme.txt -at91r40008.cfg is5114.cfg sam7se512.cfg -at91rm9200.cfg ixp42x.cfg sam7x256.cfg -at91sam3u1c.cfg lm3s1968.cfg samsung_s3c2410.cfg -at91sam3u1e.cfg lm3s3748.cfg samsung_s3c2440.cfg -at91sam3u2c.cfg lm3s6965.cfg samsung_s3c2450.cfg -at91sam3u2e.cfg lm3s811.cfg samsung_s3c4510.cfg -at91sam3u4c.cfg lm3s9b9x.cfg samsung_s3c6410.cfg -at91sam3u4e.cfg lpc1768.cfg sharp_lh79532.cfg -at91sam3uXX.cfg lpc2103.cfg smdk6410.cfg -at91sam7sx.cfg lpc2124.cfg smp8634.cfg -at91sam9260.cfg lpc2129.cfg stm32f1x.cfg -c100.cfg lpc2148.cfg str710.cfg -c100config.tcl lpc2294.cfg str730.cfg -c100helper.tcl lpc2378.cfg str750.cfg -c100regs.tcl lpc2478.cfg str912.cfg -cs351x.cfg lpc2900.cfg telo.cfg -davinci.cfg mega128.cfg ti_dm355.cfg -dragonite.cfg netx500.cfg ti_dm365.cfg -epc9301.cfg omap2420.cfg ti_dm6446.cfg -feroceon.cfg omap3530.cfg tmpa900.cfg -icepick.cfg omap5912.cfg tmpa910.cfg -imx21.cfg pic32mx.cfg xba_revA3.cfg -$ +$duc702x.cfg ixp42x.cfg +am335x.cfg k40.cfg +amdm37x.cfg k60.cfg +ar71xx.cfg lpc1768.cfg +at32ap7000.cfg lpc2103.cfg +at91r40008.cfg lpc2124.cfg +at91rm9200.cfg lpc2129.cfg +at91sam3ax_4x.cfg lpc2148.cfg +at91sam3ax_8x.cfg lpc2294.cfg +at91sam3ax_xx.cfg lpc2378.cfg +at91sam3nXX.cfg lpc2460.cfg +at91sam3sXX.cfg lpc2478.cfg +at91sam3u1c.cfg lpc2900.cfg +at91sam3u1e.cfg lpc2xxx.cfg +at91sam3u2c.cfg lpc3131.cfg +at91sam3u2e.cfg lpc3250.cfg +at91sam3u4c.cfg lpc4350.cfg +at91sam3u4e.cfg mc13224v.cfg +at91sam3uxx.cfg nuc910.cfg +at91sam3XXX.cfg omap2420.cfg +at91sam4sXX.cfg omap3530.cfg +at91sam4XXX.cfg omap4430.cfg +at91sam7se512.cfg omap4460.cfg +at91sam7sx.cfg omap5912.cfg +at91sam7x256.cfg omapl138.cfg +at91sam7x512.cfg pic32mx.cfg +at91sam9260.cfg pxa255.cfg +at91sam9260_ext_RAM_ext_flash.cfg pxa270.cfg +at91sam9261.cfg pxa3xx.cfg +at91sam9263.cfg readme.txt +at91sam9.cfg samsung_s3c2410.cfg +at91sam9g10.cfg samsung_s3c2440.cfg +at91sam9g20.cfg samsung_s3c2450.cfg +at91sam9g45.cfg samsung_s3c4510.cfg +at91sam9rl.cfg samsung_s3c6410.cfg +atmega128.cfg sharp_lh79532.cfg +avr32.cfg smp8634.cfg +c100.cfg spear3xx.cfg +c100config.tcl stellaris.cfg +c100helper.tcl stm32.cfg +c100regs.tcl stm32f0x_stlink.cfg +cs351x.cfg stm32f1x.cfg +davinci.cfg stm32f1x_stlink.cfg +dragonite.cfg stm32f2x.cfg +dsp56321.cfg stm32f2x_stlink.cfg +dsp568013.cfg stm32f2xxx.cfg +dsp568037.cfg stm32f4x.cfg +epc9301.cfg stm32f4x_stlink.cfg +faux.cfg stm32l.cfg +feroceon.cfg stm32lx_stlink.cfg +fm3.cfg stm32_stlink.cfg +hilscher_netx10.cfg stm32xl.cfg +hilscher_netx500.cfg str710.cfg +hilscher_netx50.cfg str730.cfg +icepick.cfg str750.cfg +imx21.cfg str912.cfg +imx25.cfg swj-dp.tcl +imx27.cfg test_reset_syntax_error.cfg +imx28.cfg test_syntax_error.cfg +imx31.cfg ti_dm355.cfg +imx35.cfg ti_dm365.cfg +imx51.cfg ti_dm6446.cfg +imx53.cfg tmpa900.cfg +imx.cfg tmpa910.cfg +is5114.cfg u8500.cfg @end example @item @emph{more} ... browse for other library files which may be useful. For example, there are various generic and CPU-specific utilities. @@ -1339,7 +1438,7 @@ have only been used by the developer who created it. A separate chapter gives information about how to set these up. @xref{Debug Adapter Configuration}. -Read the OpenOCD source code (and Developer's GUide) +Read the OpenOCD source code (and Developer's Guide) if you have a new kind of hardware interface and need to provide a driver for it. @@ -1553,9 +1652,9 @@ and the faster rate as soon as the clocks are at full speed. @subsection The init_board procedure @cindex init_board procedure -The concept of @code{init_board} procedure is very similar to @code{init_targets} (@xref{The init_targets procedure}) - -it's a replacement of ``linear'' configuration scripts. This procedure is meant to be executed when OpenOCD enters run -stage (@xref{Entering the Run Stage}), after @code{init_targets}. The idea to have spearate @code{init_targets} and +The concept of @code{init_board} procedure is very similar to @code{init_targets} (@xref{The init_targets procedure}.) +- it's a replacement of ``linear'' configuration scripts. This procedure is meant to be executed when OpenOCD enters run +stage (@xref{Entering the Run Stage},) after @code{init_targets}. The idea to have spearate @code{init_targets} and @code{init_board} procedures is to allow the first one to configure everything target specific (internal flash, internal RAM, etc.) and the second one to configure everything board specific (reset signals, chip frequency, reset-init event handler, external memory, etc.). Additionally ``linear'' board config file will most likely fail when @@ -1856,8 +1955,8 @@ look at how you are setting up JTAG clocking. @cindex init_targets procedure Target config files can either be ``linear'' (script executed line-by-line when parsed in configuration stage, -@xref{Configuration Stage}) or they can contain a special procedure called @code{init_targets}, which will be executed -when entering run stage (after parsing all config files or after @code{init} command, @xref{Entering the Run Stage}). +@xref{Configuration Stage},) or they can contain a special procedure called @code{init_targets}, which will be executed +when entering run stage (after parsing all config files or after @code{init} command, @xref{Entering the Run Stage}.) Such procedure can be overriden by ``next level'' script (which sources the original). This concept faciliates code reuse when basic target config files provide generic configuration procedures and @code{init_targets} procedure, which can then be sourced and enchanced or changed in a ``more specific'' target config file. This is not possible with @@ -1890,7 +1989,7 @@ The easiest way to convert ``linear'' config files to @code{init_targets} versio For an example of this scheme see LPC2000 target config files. -The @code{init_boards} procedure is a similar concept concerning board config files (@xref{The init_board procedure}). +The @code{init_boards} procedure is a similar concept concerning board config files (@xref{The init_board procedure}.) @subsection ARM Core Specific Hacks @@ -2670,6 +2769,30 @@ which are not currently documented here. @deffn {Interface Driver} {stlink} ST Micro ST-LINK adapter. + +@deffn {Config Command} {stlink_device_desc} description +Currently Not Supported. +@end deffn + +@deffn {Config Command} {stlink_serial} serial +Currently Not Supported. +@end deffn + +@deffn {Config Command} {stlink_layout} (@option{sg}|@option{usb}) +Specifies the stlink layout to use. +@end deffn + +@deffn {Config Command} {stlink_vid_pid} vid pid +The vendor ID and product ID of the STLINK device. +@end deffn + +@deffn {Config Command} {stlink_api} api_level +Manually sets the stlink api used, valid options are 1 or 2. +@end deffn +@end deffn + +@deffn {Interface Driver} {opendous} +opendous-jtag is a freely programmable USB adapter. @end deffn @deffn {Interface Driver} {ZY1000} @@ -3369,7 +3492,7 @@ hardware to find these values. option. When vendors put out multiple versions of a chip, or use the same JTAG-level ID for several largely-compatible chips, it may be more practical to ignore the version field than to update config files to handle all of -the various chip IDs. +the various chip IDs. The version field is defined as bit 28-31 of the IDCODE. @item @code{-ircapture} @var{NUMBER} @*The bit pattern loaded by the TAP into the JTAG shift register on entry to the @sc{ircapture} state, such as 0x01. @@ -3909,6 +4032,10 @@ base @var{address} to be used when an MMU is active. The value should normally correspond to a static mapping for the @code{-work-area-phys} address, set up by the current operating system. +@item @code{-rtos} @var{rtos_type} -- enable rtos support for target, +@var{rtos_type} can be one of @option{auto}|@option{eCos}|@option{ThreadX}| +@option{FreeRTOS}|@option{linux}. + @end itemize @end deffn @@ -4128,12 +4255,6 @@ depending on whether the breakpoint is in RAM or read only memory. @* Before the target steps, gdb is trying to start/resume the target @item @b{halted} @* The target has halted -@ignore -@item @b{old-gdb_program_config} -@* DO NOT USE THIS: Used internally -@item @b{old-pre_resume} -@* DO NOT USE THIS: Used internally -@end ignore @item @b{reset-assert-pre} @* Issued as part of @command{reset} processing after @command{reset_init} was triggered @@ -4193,8 +4314,6 @@ when reset disables PLLs needed to use a fast clock. @* Before any target is resumed @item @b{resume-end} @* After all targets have resumed -@item @b{resume-ok} -@* Success @item @b{resumed} @* Target has resumed @end itemize @@ -4537,6 +4656,7 @@ flash bank $_FLASHNAME aduc702x 0 0 0 0 $_TARGETNAME @end example @end deffn +@anchor{at91sam3} @deffn {Flash Driver} at91sam3 @cindex at91sam3 All members of the AT91SAM3 microcontroller family from @@ -4601,6 +4721,13 @@ This command shows/sets the slow clock frequency used in the @end deffn @end deffn +@deffn {Flash Driver} at91sam4 +@cindex at91sam4 +All members of the AT91SAM4 microcontroller family from +Atmel include internal flash and use ARM's Cortex-M4 core. +This driver uses the same cmd names/syntax as @xref{at91sam3}. +@end deffn + @deffn {Flash Driver} at91sam7 All members of the AT91SAM7 microcontroller family from Atmel include internal flash and use ARM7TDMI cores. The driver automatically @@ -4654,13 +4781,6 @@ The AVR 8-bit microcontrollers from Atmel integrate flash memory. @comment - defines mass_erase ... pointless given flash_erase_address @end deffn -@deffn {Flash Driver} ecosflash -@emph{No idea what this is...} -The @var{ecosflash} driver defines one mandatory parameter, -the name of a modules of target code which is downloaded -and executed. -@end deffn - @deffn {Flash Driver} lpc2000 Most members of the LPC1700 and LPC2000 microcontroller families from NXP include internal flash and use Cortex-M3 (LPC1700) or ARM7TDMI (LPC2000) cores. @@ -4912,6 +5032,12 @@ the chip identification register, and autoconfigures itself. flash bank $_FLASHNAME stm32f1x 0 0 0 0 $_TARGETNAME @end example +If you have a target with dual flash banks then define the second bank +as per the following example. +@example +flash bank $_FLASHNAME stm32f1x 0x08080000 0 0 0 $_TARGETNAME +@end example + Some stm32f1x-specific commands @footnote{Currently there is a @command{stm32f1x mass_erase} command. That seems pointless since the same effect can be had using the