X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=src%2Fflash%2Fnor%2Fcore.c;h=e61b30326a8003936a98589211a21bfe74d453f2;hp=5eb51cd2dad99dcfe58ed5552ea0202b6c4e1daa;hb=1f3ca0b5b81d9f9e4565cf177797a17ad37ef2c3;hpb=155a6a2c0bacdd4752e944ffd579d441361883db diff --git a/src/flash/nor/core.c b/src/flash/nor/core.c index 5eb51cd2da..e61b30326a 100644 --- a/src/flash/nor/core.c +++ b/src/flash/nor/core.c @@ -1,8 +1,9 @@ /*************************************************************************** * Copyright (C) 2005 by Dominic Rath * - * Copyright (C) 2007,2008 Øyvind Harboe * + * Copyright (C) 2007-2010 Øyvind Harboe * * Copyright (C) 2008 by Spencer Oliver * * Copyright (C) 2009 Zachary T Welch * + * Copyright (C) 2010 by Antonio Borneo * * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * @@ -17,7 +18,7 @@ * You should have received a copy of the GNU General Public License * * along with this program; if not, write to the * * Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. * ***************************************************************************/ #ifdef HAVE_CONFIG_H @@ -28,8 +29,14 @@ #include #include +/** + * @file + * Upper level of NOR flash framework. + * The lower level interfaces are to drivers. These upper level ones + * primarily support access from Tcl scripts or from GDB. + */ -struct flash_bank *flash_banks; +static struct flash_bank *flash_banks; int flash_driver_erase(struct flash_bank *bank, int first, int last) { @@ -37,9 +44,7 @@ int flash_driver_erase(struct flash_bank *bank, int first, int last) retval = bank->driver->erase(bank, first, last); if (retval != ERROR_OK) - { - LOG_ERROR("failed erasing sectors %d to %d (%d)", first, last, retval); - } + LOG_ERROR("failed erasing sectors %d to %d", first, last); return retval; } @@ -48,47 +53,87 @@ int flash_driver_protect(struct flash_bank *bank, int set, int first, int last) { int retval; + /* callers may not supply illegal parameters ... */ + if (first < 0 || first > last || last >= bank->num_sectors) { + LOG_ERROR("illegal sector range"); + return ERROR_FAIL; + } + + /* force "set" to 0/1 */ + set = !!set; + + /* DANGER! + * + * We must not use any cached information about protection state!!!! + * + * There are a million things that could change the protect state: + * + * the target could have reset, power cycled, been hot plugged, + * the application could have run, etc. + * + * Drivers only receive valid sector range. + */ retval = bank->driver->protect(bank, set, first, last); if (retval != ERROR_OK) - { - LOG_ERROR("failed setting protection for areas %d to %d (%d)", first, last, retval); - } + LOG_ERROR("failed setting protection for areas %d to %d", first, last); return retval; } int flash_driver_write(struct flash_bank *bank, - uint8_t *buffer, uint32_t offset, uint32_t count) + uint8_t *buffer, uint32_t offset, uint32_t count) { int retval; retval = bank->driver->write(bank, buffer, offset, count); - if (retval != ERROR_OK) - { - LOG_ERROR("error writing to flash at address 0x%08" PRIx32 " at offset 0x%8.8" PRIx32 " (%d)", - bank->base, offset, retval); + if (retval != ERROR_OK) { + LOG_ERROR( + "error writing to flash at address 0x%08" PRIx32 " at offset 0x%8.8" PRIx32, + bank->base, + offset); } return retval; } +int flash_driver_read(struct flash_bank *bank, + uint8_t *buffer, uint32_t offset, uint32_t count) +{ + int retval; + + LOG_DEBUG("call flash_driver_read()"); + + retval = bank->driver->read(bank, buffer, offset, count); + if (retval != ERROR_OK) { + LOG_ERROR( + "error reading to flash at address 0x%08" PRIx32 " at offset 0x%8.8" PRIx32, + bank->base, + offset); + } + + return retval; +} + +int default_flash_read(struct flash_bank *bank, + uint8_t *buffer, uint32_t offset, uint32_t count) +{ + return target_read_buffer(bank->target, offset + bank->base, count, buffer); +} + void flash_bank_add(struct flash_bank *bank) { /* put flash bank in linked list */ unsigned bank_num = 0; - if (flash_banks) - { + if (flash_banks) { /* find last flash bank */ struct flash_bank *p = flash_banks; - while (NULL != p->next) - { + while (NULL != p->next) { bank_num += 1; p = p->next; } p->next = bank; bank_num += 1; - } - else + } else flash_banks = bank; bank->bank_number = bank_num; @@ -104,12 +149,9 @@ struct flash_bank *get_flash_bank_by_num_noprobe(int num) struct flash_bank *p; int i = 0; - for (p = flash_banks; p; p = p->next) - { + for (p = flash_banks; p; p = p->next) { if (i++ == num) - { return p; - } } LOG_ERROR("flash bank %d does not exist", num); return NULL; @@ -120,20 +162,17 @@ int flash_get_bank_count(void) struct flash_bank *p; int i = 0; for (p = flash_banks; p; p = p->next) - { i++; - } return i; } -struct flash_bank *get_flash_bank_by_name(const char *name) +struct flash_bank *get_flash_bank_by_name_noprobe(const char *name) { unsigned requested = get_flash_name_index(name); unsigned found = 0; struct flash_bank *bank; - for (bank = flash_banks; NULL != bank; bank = bank->next) - { + for (bank = flash_banks; NULL != bank; bank = bank->next) { if (strcmp(bank->name, name) == 0) return bank; if (!flash_driver_name_matches(bank->driver->name, name)) @@ -145,49 +184,76 @@ struct flash_bank *get_flash_bank_by_name(const char *name) return NULL; } -struct flash_bank *get_flash_bank_by_num(int num) +int get_flash_bank_by_name(const char *name, struct flash_bank **bank_result) +{ + struct flash_bank *bank; + int retval; + + bank = get_flash_bank_by_name_noprobe(name); + if (bank != NULL) { + retval = bank->driver->auto_probe(bank); + + if (retval != ERROR_OK) { + LOG_ERROR("auto_probe failed"); + return retval; + } + } + + *bank_result = bank; + return ERROR_OK; +} + +int get_flash_bank_by_num(int num, struct flash_bank **bank) { struct flash_bank *p = get_flash_bank_by_num_noprobe(num); int retval; if (p == NULL) - return NULL; + return ERROR_FAIL; retval = p->driver->auto_probe(p); - if (retval != ERROR_OK) - { - LOG_ERROR("auto_probe failed %d\n", retval); - return NULL; + if (retval != ERROR_OK) { + LOG_ERROR("auto_probe failed"); + return retval; } - return p; + *bank = p; + return ERROR_OK; } -/* lookup flash bank by address */ -struct flash_bank *get_flash_bank_by_addr(struct target *target, uint32_t addr) +/* lookup flash bank by address, bank not found is success, but + * result_bank is set to NULL. */ +int get_flash_bank_by_addr(struct target *target, + uint32_t addr, + bool check, + struct flash_bank **result_bank) { struct flash_bank *c; /* cycle through bank list */ - for (c = flash_banks; c; c = c->next) - { + for (c = flash_banks; c; c = c->next) { int retval; retval = c->driver->auto_probe(c); - if (retval != ERROR_OK) - { - LOG_ERROR("auto_probe failed %d\n", retval); - return NULL; + if (retval != ERROR_OK) { + LOG_ERROR("auto_probe failed"); + return retval; } /* check whether address belongs to this flash bank */ - if ((addr >= c->base) && (addr <= c->base + (c->size - 1)) && target == c->target) - return c; + if ((addr >= c->base) && (addr <= c->base + (c->size - 1)) && target == c->target) { + *result_bank = c; + return ERROR_OK; + } } - LOG_ERROR("No flash at address 0x%08" PRIx32 "\n", addr); - return NULL; + *result_bank = NULL; + if (check) { + LOG_ERROR("No flash at address 0x%08" PRIx32, addr); + return ERROR_FAIL; + } + return ERROR_OK; } -int default_flash_mem_blank_check(struct flash_bank *bank) +static int default_flash_mem_blank_check(struct flash_bank *bank) { struct target *target = bank->target; const int buffer_size = 1024; @@ -195,38 +261,33 @@ int default_flash_mem_blank_check(struct flash_bank *bank) uint32_t nBytes; int retval = ERROR_OK; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } uint8_t *buffer = malloc(buffer_size); - for (i = 0; i < bank->num_sectors; i++) - { + for (i = 0; i < bank->num_sectors; i++) { uint32_t j; bank->sectors[i].is_erased = 1; - for (j = 0; j < bank->sectors[i].size; j += buffer_size) - { + for (j = 0; j < bank->sectors[i].size; j += buffer_size) { uint32_t chunk; chunk = buffer_size; if (chunk > (j - bank->sectors[i].size)) - { chunk = (j - bank->sectors[i].size); - } - retval = target_read_memory(target, bank->base + bank->sectors[i].offset + j, 4, chunk/4, buffer); + retval = target_read_memory(target, + bank->base + bank->sectors[i].offset + j, + 4, + chunk/4, + buffer); if (retval != ERROR_OK) - { goto done; - } - for (nBytes = 0; nBytes < chunk; nBytes++) - { - if (buffer[nBytes] != 0xFF) - { + for (nBytes = 0; nBytes < chunk; nBytes++) { + if (buffer[nBytes] != 0xFF) { bank->sectors[i].is_erased = 0; break; } @@ -234,7 +295,7 @@ int default_flash_mem_blank_check(struct flash_bank *bank) } } - done: +done: free(buffer); return retval; @@ -248,19 +309,17 @@ int default_flash_blank_check(struct flash_bank *bank) int fast_check = 0; uint32_t blank; - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } - for (i = 0; i < bank->num_sectors; i++) - { + for (i = 0; i < bank->num_sectors; i++) { uint32_t address = bank->base + bank->sectors[i].offset; uint32_t size = bank->sectors[i].size; - if ((retval = target_blank_check_memory(target, address, size, &blank)) != ERROR_OK) - { + retval = target_blank_check_memory(target, address, size, &blank); + if (retval != ERROR_OK) { fast_check = 0; break; } @@ -271,8 +330,7 @@ int default_flash_blank_check(struct flash_bank *bank) fast_check = 1; } - if (!fast_check) - { + if (!fast_check) { LOG_USER("Running slow fallback erase check - add working memory"); return default_flash_mem_blank_check(bank); } @@ -280,10 +338,23 @@ int default_flash_blank_check(struct flash_bank *bank) return ERROR_OK; } -/* erase given flash region, selects proper bank according to target and address */ -static int flash_iterate_address_range(struct target *target, - uint32_t addr, uint32_t length, - int (*callback)(struct flash_bank *bank, int first, int last)) +/* Manipulate given flash region, selecting the bank according to target + * and address. Maps an address range to a set of sectors, and issues + * the callback() on that set ... e.g. to erase or unprotect its members. + * + * (Note a current bad assumption: that protection operates on the same + * size sectors as erase operations use.) + * + * The "pad_reason" parameter is a kind of boolean: when it's NULL, the + * range must fit those sectors exactly. This is clearly safe; it can't + * erase data which the caller said to leave alone, for example. If it's + * non-NULL, rather than failing, extra data in the first and/or last + * sectors will be added to the range, and that reason string is used when + * warning about those additions. + */ +static int flash_iterate_address_range_inner(struct target *target, + char *pad_reason, uint32_t addr, uint32_t length, + int (*callback)(struct flash_bank *bank, int first, int last)) { struct flash_bank *c; uint32_t last_addr = addr + length; /* first address AFTER end */ @@ -291,47 +362,85 @@ static int flash_iterate_address_range(struct target *target, int last = -1; int i; - if ((c = get_flash_bank_by_addr(target, addr)) == NULL) - return ERROR_FLASH_DST_OUT_OF_BANK; /* no corresponding bank found */ + int retval = get_flash_bank_by_addr(target, addr, true, &c); + if (retval != ERROR_OK) + return retval; - if (c->size == 0 || c->num_sectors == 0) - { + if (c->size == 0 || c->num_sectors == 0) { LOG_ERROR("Bank is invalid"); return ERROR_FLASH_BANK_INVALID; } - if (length == 0) - { + if (length == 0) { /* special case, erase whole bank when length is zero */ - if (addr != c->base) + if (addr != c->base) { + LOG_ERROR("Whole bank access must start at beginning of bank."); return ERROR_FLASH_DST_BREAKS_ALIGNMENT; + } return callback(c, 0, c->num_sectors - 1); } /* check whether it all fits in this bank */ - if (addr + length - 1 > c->base + c->size - 1) + if (addr + length - 1 > c->base + c->size - 1) { + LOG_ERROR("Flash access does not fit into bank."); return ERROR_FLASH_DST_BREAKS_ALIGNMENT; + } /** @todo: handle erasures that cross into adjacent banks */ addr -= c->base; + last_addr -= c->base; - for (i = 0; i < c->num_sectors; i++) - { + for (i = 0; i < c->num_sectors; i++) { struct flash_sector *f = c->sectors + i; + uint32_t end = f->offset + f->size; /* start only on a sector boundary */ if (first < 0) { + /* scanned past the first sector? */ + if (addr < f->offset) + break; + /* is this the first sector? */ if (addr == f->offset) first = i; - else if (addr < f->offset) - break; + + /* Does this need head-padding? If so, pad and warn; + * or else force an error. + * + * Such padding can make trouble, since *WE* can't + * ever know if that data was in use. The warning + * should help users sort out messes later. + */ + else if (addr < end && pad_reason) { + /* FIXME say how many bytes (e.g. 80 KB) */ + LOG_WARNING("Adding extra %s range, " + "%#8.8x to %#8.8x", + pad_reason, + (unsigned) f->offset, + (unsigned) addr - 1); + first = i; + } else + continue; } /* is this (also?) the last sector? */ - if (last_addr == f->offset + f->size) { + if (last_addr == end) { + last = i; + break; + } + + /* Does this need tail-padding? If so, pad and warn; + * or else force an error. + */ + if (last_addr < end && pad_reason) { + /* FIXME say how many bytes (e.g. 80 KB) */ + LOG_WARNING("Adding extra %s range, " + "%#8.8x to %#8.8x", + pad_reason, + (unsigned) last_addr, + (unsigned) end - 1); last = i; break; } @@ -344,25 +453,59 @@ static int flash_iterate_address_range(struct target *target, /* invalid start or end address? */ if (first == -1 || last == -1) { LOG_ERROR("address range 0x%8.8x .. 0x%8.8x " - "is not sector-aligned", - (unsigned) (c->base + addr), - (unsigned) (last_addr - 1)); + "is not sector-aligned", + (unsigned) (c->base + addr), + (unsigned) (c->base + last_addr - 1)); return ERROR_FLASH_DST_BREAKS_ALIGNMENT; } - /* The NOR driver may trim this range down, based on - * whether or not a given sector is already erased. - * - * REVISIT should *we* trim it... ? + /* The NOR driver may trim this range down, based on what + * sectors are already erased/unprotected. GDB currently + * blocks such optimizations. */ return callback(c, first, last); } +/* The inner fn only handles a single bank, we could be spanning + * multiple chips. + */ +static int flash_iterate_address_range(struct target *target, + char *pad_reason, uint32_t addr, uint32_t length, + int (*callback)(struct flash_bank *bank, int first, int last)) +{ + struct flash_bank *c; + int retval = ERROR_OK; + + /* Danger! zero-length iterations means entire bank! */ + do { + retval = get_flash_bank_by_addr(target, addr, true, &c); + if (retval != ERROR_OK) + return retval; + + uint32_t cur_length = length; + /* check whether it all fits in this bank */ + if (addr + length - 1 > c->base + c->size - 1) { + LOG_DEBUG("iterating over more than one flash bank."); + cur_length = c->base + c->size - addr; + } + retval = flash_iterate_address_range_inner(target, + pad_reason, addr, cur_length, + callback); + if (retval != ERROR_OK) + break; + + length -= cur_length; + addr += cur_length; + } while (length > 0); + + return retval; +} + int flash_erase_address_range(struct target *target, - uint32_t addr, uint32_t length) + bool pad, uint32_t addr, uint32_t length) { - return flash_iterate_address_range(target, - addr, length, &flash_driver_erase); + return flash_iterate_address_range(target, pad ? "erase" : NULL, + addr, length, &flash_driver_erase); } static int flash_driver_unprotect(struct flash_bank *bank, int first, int last) @@ -370,14 +513,32 @@ static int flash_driver_unprotect(struct flash_bank *bank, int first, int last) return flash_driver_protect(bank, 0, first, last); } -static int flash_unlock_address_range(struct target *target, uint32_t addr, uint32_t length) +int flash_unlock_address_range(struct target *target, uint32_t addr, uint32_t length) +{ + /* By default, pad to sector boundaries ... the real issue here + * is that our (only) caller *permanently* removes protection, + * and doesn't restore it. + */ + return flash_iterate_address_range(target, "unprotect", + addr, length, &flash_driver_unprotect); +} + +static int compare_section(const void *a, const void *b) { - return flash_iterate_address_range(target, - addr, length, &flash_driver_unprotect); + struct imagesection *b1, *b2; + b1 = *((struct imagesection **)a); + b2 = *((struct imagesection **)b); + + if (b1->base_address == b2->base_address) + return 0; + else if (b1->base_address > b2->base_address) + return 1; + else + return -1; } int flash_write_unlock(struct target *target, struct image *image, - uint32_t *written, int erase, bool unlock) + uint32_t *written, int erase, bool unlock) { int retval = ERROR_OK; @@ -392,8 +553,7 @@ int flash_write_unlock(struct target *target, struct image *image, if (written) *written = 0; - if (erase) - { + if (erase) { /* assume all sectors need erasing - stops any problems * when flash_write is called multiple times */ @@ -403,19 +563,27 @@ int flash_write_unlock(struct target *target, struct image *image, /* allocate padding array */ padding = calloc(image->num_sections, sizeof(*padding)); + /* This fn requires all sections to be in ascending order of addresses, + * whereas an image can have sections out of order. */ + struct imagesection **sections = malloc(sizeof(struct imagesection *) * + image->num_sections); + int i; + for (i = 0; i < image->num_sections; i++) + sections[i] = &image->sections[i]; + + qsort(sections, image->num_sections, sizeof(struct imagesection *), + compare_section); + /* loop until we reach end of the image */ - while (section < image->num_sections) - { + while (section < image->num_sections) { uint32_t buffer_size; uint8_t *buffer; - int section_first; int section_last; - uint32_t run_address = image->sections[section].base_address + section_offset; - uint32_t run_size = image->sections[section].size - section_offset; + uint32_t run_address = sections[section]->base_address + section_offset; + uint32_t run_size = sections[section]->size - section_offset; int pad_bytes = 0; - if (image->sections[section].size == 0) - { + if (sections[section]->size == 0) { LOG_WARNING("empty section %d", section); section++; section_offset = 0; @@ -423,34 +591,34 @@ int flash_write_unlock(struct target *target, struct image *image, } /* find the corresponding flash bank */ - if ((c = get_flash_bank_by_addr(target, run_address)) == NULL) - { - section++; /* and skip it */ + retval = get_flash_bank_by_addr(target, run_address, false, &c); + if (retval != ERROR_OK) + goto done; + if (c == NULL) { + LOG_WARNING("no flash bank found for address %x", run_address); + section++; /* and skip it */ section_offset = 0; continue; } /* collect consecutive sections which fall into the same bank */ - section_first = section; section_last = section; padding[section] = 0; - while ((run_address + run_size - 1 < c->base + c->size - 1) - && (section_last + 1 < image->num_sections)) - { - if (image->sections[section_last + 1].base_address < (run_address + run_size)) - { - LOG_DEBUG("section %d out of order " - "(surprising, but supported)", - section_last + 1); - /* REVISIT this can break with autoerase ... - * clobbering data after it's written. - */ + while ((run_address + run_size - 1 < c->base + c->size - 1) && + (section_last + 1 < image->num_sections)) { + /* sections are sorted */ + assert(sections[section_last + 1]->base_address >= c->base); + if (sections[section_last + 1]->base_address >= (c->base + c->size)) { + /* Done with this bank */ break; } - /* REVISIT This needlessly touches sectors BETWEEN the + /* FIXME This needlessly touches sectors BETWEEN the * sections it's writing. Without auto erase, it just - * writes ones; unlikely to destroy data. + * writes ones. That WILL INVALIDATE data in cases + * like Stellaris Tempest chips, corrupting internal + * ECC codes; and at least FreeScale suggests issues + * with that approach (in HC11 documentation). * * With auto erase enabled, data in those sectors will * be needlessly destroyed; and some of the limited @@ -459,27 +627,28 @@ int flash_write_unlock(struct target *target, struct image *image, * In both cases, the extra writes slow things down. */ - /* if we have multiple sections within our image, flash programming could fail due to alignment issues + /* if we have multiple sections within our image, + * flash programming could fail due to alignment issues * attempt to rebuild a consecutive buffer for the flash loader */ - pad_bytes = (image->sections[section_last + 1].base_address) - (run_address + run_size); - if ((run_address + run_size + pad_bytes) > (c->base + c->size)) - break; + pad_bytes = (sections[section_last + 1]->base_address) - (run_address + run_size); padding[section_last] = pad_bytes; - run_size += image->sections[++section_last].size; + run_size += sections[++section_last]->size; run_size += pad_bytes; - LOG_INFO("Padding image section %d with %d bytes", section_last-1, pad_bytes); + if (pad_bytes > 0) + LOG_INFO("Padding image section %d with %d bytes", + section_last-1, + pad_bytes); } - /* fit the run into bank constraints */ - if (run_address + run_size - 1 > c->base + c->size - 1) - { - /* REVISIT isn't this superfluous, given the while() - * loop conditions above?? + if (run_address + run_size - 1 > c->base + c->size - 1) { + /* If we have more than one flash chip back to back, then we limit + * the current write operation to the current chip. */ - LOG_WARNING("writing %d bytes only - as image section is %d bytes and bank is only %d bytes", \ - (int)(c->base + c->size - run_address), (int)(run_size), (int)(c->size)); + LOG_DEBUG("Truncate flash run size to the current flash chip."); + run_size = c->base + c->size - run_address; + assert(run_size > 0); } /* If we're applying any sector automagic, then pad this @@ -493,7 +662,7 @@ int flash_write_unlock(struct target *target, struct image *image, for (sector = 0; sector < c->num_sectors; sector++) { end = c->sectors[sector].offset - + c->sectors[sector].size; + + c->sectors[sector].size; if (offset_end <= end) break; } @@ -505,34 +674,48 @@ int flash_write_unlock(struct target *target, struct image *image, /* allocate buffer */ buffer = malloc(run_size); + if (buffer == NULL) { + LOG_ERROR("Out of memory for flash bank buffer"); + retval = ERROR_FAIL; + goto done; + } buffer_size = 0; /* read sections to the buffer */ - while (buffer_size < run_size) - { + while (buffer_size < run_size) { size_t size_read; size_read = run_size - buffer_size; - if (size_read > image->sections[section].size - section_offset) - size_read = image->sections[section].size - section_offset; + if (size_read > sections[section]->size - section_offset) + size_read = sections[section]->size - section_offset; - if ((retval = image_read_section(image, section, section_offset, - size_read, buffer + buffer_size, &size_read)) != ERROR_OK || size_read == 0) - { + /* KLUDGE! + * + * #¤%#"%¤% we have to figure out the section # from the sorted + * list of pointers to sections to invoke image_read_section()... + */ + intptr_t diff = (intptr_t)sections[section] - (intptr_t)image->sections; + int t_section_num = diff / sizeof(struct imagesection); + + LOG_DEBUG("image_read_section: section = %d, t_section_num = %d, " + "section_offset = %d, buffer_size = %d, size_read = %d", + (int)section, (int)t_section_num, (int)section_offset, + (int)buffer_size, (int)size_read); + retval = image_read_section(image, t_section_num, section_offset, + size_read, buffer + buffer_size, &size_read); + if (retval != ERROR_OK || size_read == 0) { free(buffer); - free(padding); - return retval; + goto done; } /* see if we need to pad the section */ while (padding[section]--) - (buffer + buffer_size)[size_read++] = 0xff; + (buffer + buffer_size)[size_read++] = c->default_padded_value; buffer_size += size_read; section_offset += size_read; - if (section_offset >= image->sections[section].size) - { + if (section_offset >= sections[section]->size) { section++; section_offset = 0; } @@ -541,43 +724,40 @@ int flash_write_unlock(struct target *target, struct image *image, retval = ERROR_OK; if (unlock) - { retval = flash_unlock_address_range(target, run_address, run_size); - } - if (retval == ERROR_OK) - { - if (erase) - { + if (retval == ERROR_OK) { + if (erase) { /* calculate and erase sectors */ - retval = flash_erase_address_range(target, run_address, run_size); + retval = flash_erase_address_range(target, + true, run_address, run_size); } } - if (retval == ERROR_OK) - { + if (retval == ERROR_OK) { /* write flash sectors */ retval = flash_driver_write(c, buffer, run_address - c->base, run_size); } free(buffer); - if (retval != ERROR_OK) - { - free(padding); - return retval; /* abort operation */ + if (retval != ERROR_OK) { + /* abort operation */ + goto done; } if (written != NULL) - *written += run_size; /* add run size to total written counter */ + *written += run_size; /* add run size to total written counter */ } +done: + free(sections); free(padding); return retval; } int flash_write(struct target *target, struct image *image, - uint32_t *written, int erase) + uint32_t *written, int erase) { return flash_write_unlock(target, image, written, erase, false); }