X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=src%2Fflash%2Fnor%2Fcore.h;h=1bfe1ab977641828a47efe0f9869833e17ceb776;hp=36e163dfc085d69bd157f8c65539d2bb8ef1467c;hb=f035b0851bbc6a9ccc2b20128ae2e4d3abd9ba38;hpb=8c730aaee22a505cf66666be3ff28734ac885418 diff --git a/src/flash/nor/core.h b/src/flash/nor/core.h index 36e163dfc0..1bfe1ab977 100644 --- a/src/flash/nor/core.h +++ b/src/flash/nor/core.h @@ -3,6 +3,7 @@ * Copyright (C) 2007,2008 Øyvind Harboe * * Copyright (C) 2008 by Spencer Oliver * * Copyright (C) 2009 Zachary T Welch * + * Copyright (C) 2010 by Antonio Borneo * * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * @@ -15,12 +16,11 @@ * GNU General Public License for more details. * * * * You should have received a copy of the GNU General Public License * - * along with this program; if not, write to the * - * Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * along with this program. If not, see . * ***************************************************************************/ -#ifndef FLASH_NOR_CORE_H -#define FLASH_NOR_CORE_H + +#ifndef OPENOCD_FLASH_NOR_CORE_H +#define OPENOCD_FLASH_NOR_CORE_H #include @@ -38,21 +38,29 @@ struct image; * within a flash bank. A single bank typically consists of multiple * sectors, each of which can be erased and protected independently. */ -struct flash_sector -{ - /// Bus offset from start of the flash chip (in bytes). +struct flash_sector { + /** Bus offset from start of the flash chip (in bytes). */ uint32_t offset; - /// Number of bytes in this flash sector. + /** Number of bytes in this flash sector. */ uint32_t size; /** * Indication of erasure status: 0 = not erased, 1 = erased, * other = unknown. Set by @c flash_driver_s::erase_check. + * + * Flag is not used in protection block */ int is_erased; /** * Indication of protection status: 0 = unprotected/unlocked, * 1 = protected/locked, other = unknown. Set by * @c flash_driver_s::protect_check. + * + * This information must be considered stale immediately. + * A million things could make it stale: power cycle, + * reset of target, code running on target, etc. + * + * If a flash_bank uses an extra array of protection blocks, + * protection flag is not valid in sector array */ int is_protected; }; @@ -67,8 +75,7 @@ struct flash_sector * may use the @c driver_priv member to store additional data on a * per-bank basis, if required. */ -struct flash_bank -{ +struct flash_bank { char *name; struct target *target; /**< Target to which this bank belongs. */ @@ -83,29 +90,51 @@ struct flash_bank int chip_width; /**< Width of the chip in bytes (1,2,4 bytes) */ int bus_width; /**< Maximum bus width, in bytes (1,2,4 bytes) */ + /** Erased value. Defaults to 0xFF. */ + uint8_t erased_value; + + /** Default padded value used, normally this matches the flash + * erased value. Defaults to 0xFF. */ + uint8_t default_padded_value; + /** * The number of sectors on this chip. This value will * be set intially to 0, and the flash driver must set this to * some non-zero value during "probe()" or "auto_probe()". */ int num_sectors; - /// Array of sectors, allocated and initilized by the flash driver + /** Array of sectors, allocated and initialized by the flash driver */ struct flash_sector *sectors; + /** + * The number of protection blocks in this bank. This value + * is set intially to 0 and sectors are used as protection blocks. + * Driver probe can set protection blocks array to work with + * protection granularity different than sector size. + */ + int num_prot_blocks; + /** Array of protection blocks, allocated and initilized by the flash driver */ + struct flash_sector *prot_blocks; + struct flash_bank *next; /**< The next flash bank on this chip */ }; -/// Registers the 'flash' subsystem commands +/** Registers the 'flash' subsystem commands */ int flash_register_commands(struct command_context *cmd_ctx); -/// Initializes the 'flash' subsystem drivers -int flash_init_drivers(struct command_context *cmd_ctx); /** * Erases @a length bytes in the @a target flash, starting at @a addr. + * The range @a addr to @a addr + @a length - 1 must be strictly + * sector aligned, unless @a pad is true. Setting @a pad true extends + * the range, at beginning and/or end, if needed for sector alignment. * @returns ERROR_OK if successful; otherwise, an error code. */ int flash_erase_address_range(struct target *target, - uint32_t addr, uint32_t length); + bool pad, uint32_t addr, uint32_t length); + +int flash_unlock_address_range(struct target *target, uint32_t addr, + uint32_t length); + /** * Writes @a image into the @a target flash. The @a written parameter * will contain the @@ -118,13 +147,31 @@ int flash_erase_address_range(struct target *target, */ int flash_write(struct target *target, struct image *image, uint32_t *written, int erase); + /** * Forces targets to re-examine their erase/protection state. * This routine must be called when the system may modify the status. */ void flash_set_dirty(void); -/// @returns The number of flash banks currently defined. + +/** @returns The number of flash banks currently defined. */ int flash_get_bank_count(void); + +/** Deallocates bank->driver_priv */ +void default_flash_free_driver_priv(struct flash_bank *bank); + +/** Deallocates all flash banks */ +void flash_free_all_banks(void); +/** + * Provides default read implementation for flash memory. + * @param bank The bank to read. + * @param buffer The data bytes read. + * @param offset The offset into the chip to read. + * @param count The number of bytes to read. + * @returns ERROR_OK if successful; otherwise, an error code. + */ +int default_flash_read(struct flash_bank *bank, + uint8_t *buffer, uint32_t offset, uint32_t count); /** * Provides default erased-bank check handling. Checks to see if * the flash driver knows they are erased; if things look uncertain, @@ -132,14 +179,15 @@ int flash_get_bank_count(void); * @returns ERROR_OK if successful; otherwise, an error code. */ int default_flash_blank_check(struct flash_bank *bank); + /** - * Provides a default blank flash memory check. Ensures the contents - * of the given bank have truly been erased. - * @param bank The flash bank. - * @returns ERROR_OK if successful; otherwise, an error code. + * Returns the flash bank specified by @a name, which matches the + * driver name and a suffix (option) specify the driver-specific + * bank number. The suffix consists of the '.' and the driver-specific + * bank number: when two str9x banks are defined, then 'str9x.1' refers + * to the second. */ -int default_flash_mem_blank_check(struct flash_bank *bank); - +int get_flash_bank_by_name(const char *name, struct flash_bank **bank_result); /** * Returns the flash bank specified by @a name, which matches the * driver name and a suffix (option) specify the driver-specific @@ -147,13 +195,14 @@ int default_flash_mem_blank_check(struct flash_bank *bank); * bank number: when two str9x banks are defined, then 'str9x.1' refers * to the second. */ -struct flash_bank *get_flash_bank_by_name(const char *name); +struct flash_bank *get_flash_bank_by_name_noprobe(const char *name); /** - * Returns a flash bank by the specified flash_bank_s bank_number, @a num. + * Returns the flash bank like get_flash_bank_by_name(), without probing. * @param num The flash bank number. - * @returns A struct flash_bank for flash bank @a num, or NULL + * @param bank returned bank if fn returns ERROR_OK + * @returns ERROR_OK if successful */ -struct flash_bank *get_flash_bank_by_num(int num); +int get_flash_bank_by_num(int num, struct flash_bank **bank); /** * Retreives @a bank from a command argument, reporting errors parsing * the bank identifier or retreiving the specified bank. The bank @@ -176,8 +225,18 @@ struct flash_bank *get_flash_bank_by_num_noprobe(int num); * Returns the flash bank located at a specified address. * @param target The target, presumed to contain one or more banks. * @param addr An address that is within the range of the bank. + * @param check return ERROR_OK and result_bank NULL if the bank does not exist * @returns The struct flash_bank located at @a addr, or NULL. */ -struct flash_bank *get_flash_bank_by_addr(struct target *target, uint32_t addr); +int get_flash_bank_by_addr(struct target *target, uint32_t addr, bool check, + struct flash_bank **result_bank); +/** + * Allocate and fill an array of sectors or protection blocks. + * @param offset Offset of first block. + * @param size Size of each block. + * @param num_blocks Number of blocks in array. + * @returns A struct flash_sector pointer or NULL when allocation failed. + */ +struct flash_sector *alloc_block_array(uint32_t offset, uint32_t size, int num_blocks); -#endif // FLASH_NOR_CORE_H +#endif /* OPENOCD_FLASH_NOR_CORE_H */