X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=src%2Fflash%2Fnor%2Fstm32f2x.c;h=672f08747331c4e3e32aabd8795b719e8b1bcbec;hp=6d97bc64f30ac28aadbe4af16d7907d6281a355d;hb=977db554c441a7677272aa92e1e18dc29aef1c5a;hpb=0cccdde3c726b1ec25fc27b23a6a700260dbf266
diff --git a/src/flash/nor/stm32f2x.c b/src/flash/nor/stm32f2x.c
index 6d97bc64f3..672f087473 100644
--- a/src/flash/nor/stm32f2x.c
+++ b/src/flash/nor/stm32f2x.c
@@ -23,6 +23,7 @@
* Free Software Foundation, Inc., *
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
***************************************************************************/
+
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
@@ -70,7 +71,8 @@
* http://www.st.com/internet/mcu/product/250192.jsp
*
* PM0059
- * www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/PROGRAMMING_MANUAL/CD00233952.pdf
+ * www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/
+ * PROGRAMMING_MANUAL/CD00233952.pdf
*
* STM32F1x series - notice that this code was copy, pasted and knocked
* into a stm32f2x driver, so in case something has been converted or
@@ -85,78 +87,73 @@
*
*/
- // Erase time can be as high as 1000ms, 10x this and it's toast...
+/* Erase time can be as high as 1000ms, 10x this and it's toast... */
#define FLASH_ERASE_TIMEOUT 10000
#define FLASH_WRITE_TIMEOUT 5
-
-#define STM32_FLASH_BASE 0x40023c00
-#define STM32_FLASH_ACR 0x40023c00
-#define STM32_FLASH_KEYR 0x40023c04
-#define STM32_FLASH_OPTKEYR 0x40023c08
-#define STM32_FLASH_SR 0x40023c0C
-#define STM32_FLASH_CR 0x40023c10
-#define STM32_FLASH_OPTCR 0x40023c14
-#define STM32_FLASH_OBR 0x40023c1C
-
-
+#define STM32_FLASH_BASE 0x40023c00
+#define STM32_FLASH_ACR 0x40023c00
+#define STM32_FLASH_KEYR 0x40023c04
+#define STM32_FLASH_OPTKEYR 0x40023c08
+#define STM32_FLASH_SR 0x40023c0C
+#define STM32_FLASH_CR 0x40023c10
+#define STM32_FLASH_OPTCR 0x40023c14
+#define STM32_FLASH_OBR 0x40023c1C
/* option byte location */
-#define STM32_OB_RDP 0x1FFFF800
-#define STM32_OB_USER 0x1FFFF802
-#define STM32_OB_DATA0 0x1FFFF804
-#define STM32_OB_DATA1 0x1FFFF806
-#define STM32_OB_WRP0 0x1FFFF808
-#define STM32_OB_WRP1 0x1FFFF80A
-#define STM32_OB_WRP2 0x1FFFF80C
-#define STM32_OB_WRP3 0x1FFFF80E
+#define STM32_OB_RDP 0x1FFFF800
+#define STM32_OB_USER 0x1FFFF802
+#define STM32_OB_DATA0 0x1FFFF804
+#define STM32_OB_DATA1 0x1FFFF806
+#define STM32_OB_WRP0 0x1FFFF808
+#define STM32_OB_WRP1 0x1FFFF80A
+#define STM32_OB_WRP2 0x1FFFF80C
+#define STM32_OB_WRP3 0x1FFFF80E
/* FLASH_CR register bits */
-#define FLASH_PG (1 << 0)
-#define FLASH_SER (1 << 1)
-#define FLASH_MER (1 << 2)
-#define FLASH_STRT (1 << 16)
-#define FLASH_PSIZE_8 (0 << 8)
-#define FLASH_PSIZE_16 (1 << 8)
-#define FLASH_PSIZE_32 (2 << 8)
-#define FLASH_PSIZE_64 (3 << 8)
-#define FLASH_SNB(a) ((a) << 3)
-#define FLASH_LOCK (1 << 31)
+#define FLASH_PG (1 << 0)
+#define FLASH_SER (1 << 1)
+#define FLASH_MER (1 << 2)
+#define FLASH_MER1 (1 << 15)
+#define FLASH_STRT (1 << 16)
+#define FLASH_PSIZE_8 (0 << 8)
+#define FLASH_PSIZE_16 (1 << 8)
+#define FLASH_PSIZE_32 (2 << 8)
+#define FLASH_PSIZE_64 (3 << 8)
+#define FLASH_SNB(a) ((a) << 3)
+#define FLASH_LOCK (1 << 31)
/* FLASH_SR register bits */
-#define FLASH_BSY (1 << 16)
-#define FLASH_PGSERR (1 << 7) // Programming sequence error
-#define FLASH_PGPERR (1 << 6) // Programming parallelism error
-#define FLASH_PGAERR (1 << 5) // Programming alignment error
-#define FLASH_WRPERR (1 << 4) // Write protection error
-#define FLASH_OPERR (1 << 1) // Operation error
+#define FLASH_BSY (1 << 16)
+#define FLASH_PGSERR (1 << 7) /* Programming sequence error */
+#define FLASH_PGPERR (1 << 6) /* Programming parallelism error */
+#define FLASH_PGAERR (1 << 5) /* Programming alignment error */
+#define FLASH_WRPERR (1 << 4) /* Write protection error */
+#define FLASH_OPERR (1 << 1) /* Operation error */
-#define FLASH_ERROR (FLASH_PGSERR | FLASH_PGPERR | FLASH_PGAERR| FLASH_WRPERR| FLASH_OPERR)
+#define FLASH_ERROR (FLASH_PGSERR | FLASH_PGPERR | FLASH_PGAERR | FLASH_WRPERR | FLASH_OPERR)
/* STM32_FLASH_OBR bit definitions (reading) */
-#define OPT_ERROR 0
-#define OPT_READOUT 1
-#define OPT_RDWDGSW 2
-#define OPT_RDRSTSTOP 3
-#define OPT_RDRSTSTDBY 4
-#define OPT_BFB2 5 /* dual flash bank only */
+#define OPT_ERROR 0
+#define OPT_READOUT 1
+#define OPT_RDWDGSW 2
+#define OPT_RDRSTSTOP 3
+#define OPT_RDRSTSTDBY 4
+#define OPT_BFB2 5 /* dual flash bank only */
/* register unlock keys */
-#define KEY1 0x45670123
-#define KEY2 0xCDEF89AB
+#define KEY1 0x45670123
+#define KEY2 0xCDEF89AB
-struct stm32x_flash_bank
-{
- struct working_area *write_algorithm;
+struct stm32x_flash_bank {
int probed;
};
-
/* flash bank stm32x 0 0
*/
FLASH_BANK_COMMAND_HANDLER(stm32x_flash_bank_command)
@@ -164,14 +161,11 @@ FLASH_BANK_COMMAND_HANDLER(stm32x_flash_bank_command)
struct stm32x_flash_bank *stm32x_info;
if (CMD_ARGC < 6)
- {
return ERROR_COMMAND_SYNTAX_ERROR;
- }
stm32x_info = malloc(sizeof(struct stm32x_flash_bank));
bank->driver_priv = stm32x_info;
- stm32x_info->write_algorithm = NULL;
stm32x_info->probed = 0;
return ERROR_OK;
@@ -195,16 +189,14 @@ static int stm32x_wait_status_busy(struct flash_bank *bank, int timeout)
int retval = ERROR_OK;
/* wait for busy to clear */
- for (;;)
- {
+ for (;;) {
retval = stm32x_get_flash_status(bank, &status);
if (retval != ERROR_OK)
return retval;
LOG_DEBUG("status: 0x%" PRIx32 "", status);
if ((status & FLASH_BSY) == 0)
break;
- if (timeout-- <= 0)
- {
+ if (timeout-- <= 0) {
LOG_ERROR("timed out waiting for flash");
return ERROR_FAIL;
}
@@ -212,15 +204,13 @@ static int stm32x_wait_status_busy(struct flash_bank *bank, int timeout)
}
- if (status & FLASH_WRPERR)
- {
+ if (status & FLASH_WRPERR) {
LOG_ERROR("stm32x device protected");
retval = ERROR_FAIL;
}
/* Clear but report errors */
- if (status & FLASH_ERROR)
- {
+ if (status & FLASH_ERROR) {
/* If this operation fails, we ignore it and report the original
* retval
*/
@@ -275,8 +265,7 @@ static int stm32x_erase(struct flash_bank *bank, int first, int last)
struct target *target = bank->target;
int i;
- if (bank->target->state != TARGET_HALTED)
- {
+ if (bank->target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
@@ -297,8 +286,7 @@ static int stm32x_erase(struct flash_bank *bank, int first, int last)
4. Wait for the BSY bit to be cleared
*/
- for (i = first; i <= last; i++)
- {
+ for (i = first; i <= last; i++) {
retval = target_write_u32(target,
stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_SER | FLASH_SNB(i) | FLASH_STRT);
if (retval != ERROR_OK)
@@ -326,9 +314,9 @@ static int stm32x_protect(struct flash_bank *bank, int set, int first, int last)
static int stm32x_write_block(struct flash_bank *bank, uint8_t *buffer,
uint32_t offset, uint32_t count)
{
- struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
struct target *target = bank->target;
uint32_t buffer_size = 16384;
+ struct working_area *write_algorithm;
struct working_area *source;
uint32_t address = bank->base + offset;
struct reg_param reg_params[5];
@@ -337,58 +325,63 @@ static int stm32x_write_block(struct flash_bank *bank, uint8_t *buffer,
/* see contrib/loaders/flash/stm32f2x.S for src */
- static const uint16_t stm32x_flash_write_code_16[] = {
- /* 00000000 : */
- 0x4b07, /* ldr r3, [pc, #28] (20 ) */
- 0x6123, /* str r3, [r4, #16] */
- 0xf830, 0x3b02, /* ldrh.w r3, [r0], #2 */
- 0xf821, 0x3b02, /* strh.w r3, [r1], #2 */
-
- /* 0000000c : */
- 0x68e3, /* ldr r3, [r4, #12] */
- 0xf413, 0x3f80, /* tst.w r3, #65536 ; 0x10000 */
- 0xd0fb, /* beq.n c */
- 0xf013, 0x0ff0, /* tst.w r3, #240 ; 0xf0 */
- 0xd101, /* bne.n 1e */
- 0x3a01, /* subs r2, #1 */
- 0xd1f0, /* bne.n 0 */
- /* 0000001e : */
- 0xbe00, /* bkpt 0x0000 */
-
- /* 00000020 : */
- 0x0101, 0x0000, /* .word 0x00000101 */
+ static const uint8_t stm32x_flash_write_code[] = {
+ /* wait_fifo: */
+ 0xD0, 0xF8, 0x00, 0x80, /* ldr r8, [r0, #0] */
+ 0xB8, 0xF1, 0x00, 0x0F, /* cmp r8, #0 */
+ 0x1A, 0xD0, /* beq exit */
+ 0x47, 0x68, /* ldr r7, [r0, #4] */
+ 0x47, 0x45, /* cmp r7, r8 */
+ 0xF7, 0xD0, /* beq wait_fifo */
+
+ 0xDF, 0xF8, 0x30, 0x60, /* ldr r6, STM32_PROG16 */
+ 0x26, 0x61, /* str r6, [r4, #STM32_FLASH_CR_OFFSET] */
+ 0x37, 0xF8, 0x02, 0x6B, /* ldrh r6, [r7], #0x02 */
+ 0x22, 0xF8, 0x02, 0x6B, /* strh r6, [r2], #0x02 */
+ /* busy: */
+ 0xE6, 0x68, /* ldr r6, [r4, #STM32_FLASH_SR_OFFSET] */
+ 0x16, 0xF4, 0x80, 0x3F, /* tst r6, #0x10000 */
+ 0xFB, 0xD1, /* bne busy */
+ 0x16, 0xF0, 0xF0, 0x0F, /* tst r6, #0xf0 */
+ 0x07, 0xD1, /* bne error */
+
+ 0x8F, 0x42, /* cmp r7, r1 */
+ 0x28, 0xBF, /* it cs */
+ 0x00, 0xF1, 0x08, 0x07, /* addcs r7, r0, #8 */
+ 0x47, 0x60, /* str r7, [r0, #4] */
+ 0x01, 0x3B, /* subs r3, r3, #1 */
+ 0x13, 0xB1, /* cbz r3, exit */
+ 0xE1, 0xE7, /* b wait_fifo */
+ /* error: */
+ 0x00, 0x21, /* movs r1, #0 */
+ 0x41, 0x60, /* str r1, [r0, #4] */
+ /* exit: */
+ 0x30, 0x46, /* mov r0, r6 */
+ 0x00, 0xBE, /* bkpt #0x00 */
+
+ /* : */
+ 0x01, 0x01, 0x00, 0x00, /* .word 0x00000101 */
};
- /* Flip endian */
- uint8_t stm32x_flash_write_code[sizeof(stm32x_flash_write_code_16)*2];
- for (unsigned i = 0; i < sizeof(stm32x_flash_write_code_16) / 2; i++)
- {
- stm32x_flash_write_code[i*2 + 0] = stm32x_flash_write_code_16[i] & 0xff;
- stm32x_flash_write_code[i*2 + 1] = (stm32x_flash_write_code_16[i] >> 8) & 0xff;
- }
-
if (target_alloc_working_area(target, sizeof(stm32x_flash_write_code),
- &stm32x_info->write_algorithm) != ERROR_OK)
- {
+ &write_algorithm) != ERROR_OK) {
LOG_WARNING("no working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
};
- if ((retval = target_write_buffer(target, stm32x_info->write_algorithm->address,
+ retval = target_write_buffer(target, write_algorithm->address,
sizeof(stm32x_flash_write_code),
- (uint8_t*)stm32x_flash_write_code)) != ERROR_OK)
+ (uint8_t *)stm32x_flash_write_code);
+ if (retval != ERROR_OK)
return retval;
/* memory buffer */
- while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK)
- {
+ while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) {
buffer_size /= 2;
- if (buffer_size <= 256)
- {
- /* if we already allocated the writing code, but failed to get a
+ if (buffer_size <= 256) {
+ /* we already allocated the writing code, but failed to get a
* buffer, free the algorithm */
- if (stm32x_info->write_algorithm)
- target_free_working_area(target, stm32x_info->write_algorithm);
+ target_free_working_area(target, write_algorithm);
LOG_WARNING("no large enough working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
@@ -398,61 +391,43 @@ static int stm32x_write_block(struct flash_bank *bank, uint8_t *buffer,
armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
armv7m_info.core_mode = ARMV7M_MODE_ANY;
- init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
- init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
- init_reg_param(®_params[2], "r2", 32, PARAM_OUT);
- init_reg_param(®_params[3], "r3", 32, PARAM_IN_OUT);
- init_reg_param(®_params[4], "r4", 32, PARAM_OUT);
+ init_reg_param(®_params[0], "r0", 32, PARAM_IN_OUT); /* buffer start, status (out) */
+ init_reg_param(®_params[1], "r1", 32, PARAM_OUT); /* buffer end */
+ init_reg_param(®_params[2], "r2", 32, PARAM_OUT); /* target address */
+ init_reg_param(®_params[3], "r3", 32, PARAM_OUT); /* count (halfword-16bit) */
+ init_reg_param(®_params[4], "r4", 32, PARAM_OUT); /* flash base */
- while (count > 0)
- {
- uint32_t thisrun_count = (count > (buffer_size / 2)) ?
- (buffer_size / 2) : count;
+ buf_set_u32(reg_params[0].value, 0, 32, source->address);
+ buf_set_u32(reg_params[1].value, 0, 32, source->address + source->size);
+ buf_set_u32(reg_params[2].value, 0, 32, address);
+ buf_set_u32(reg_params[3].value, 0, 32, count);
+ buf_set_u32(reg_params[4].value, 0, 32, STM32_FLASH_BASE);
- if ((retval = target_write_buffer(target, source->address,
- thisrun_count * 2, buffer)) != ERROR_OK)
- break;
+ retval = target_run_flash_async_algorithm(target, buffer, count, 2,
+ 0, NULL,
+ 5, reg_params,
+ source->address, source->size,
+ write_algorithm->address, 0,
+ &armv7m_info);
- buf_set_u32(reg_params[0].value, 0, 32, source->address);
- buf_set_u32(reg_params[1].value, 0, 32, address);
- buf_set_u32(reg_params[2].value, 0, 32, thisrun_count);
- // R3 is a return value only
- buf_set_u32(reg_params[4].value, 0, 32, STM32_FLASH_BASE);
-
- if ((retval = target_run_algorithm(target, 0, NULL,
- sizeof(reg_params) / sizeof(*reg_params),
- reg_params,
- stm32x_info->write_algorithm->address,
- 0,
- 10000, &armv7m_info)) != ERROR_OK)
- {
- LOG_ERROR("error executing stm32x flash write algorithm");
- break;
- }
+ if (retval == ERROR_FLASH_OPERATION_FAILED) {
+ LOG_ERROR("error executing stm32x flash write algorithm");
- uint32_t error = buf_get_u32(reg_params[3].value, 0, 32) & FLASH_ERROR;
+ uint32_t error = buf_get_u32(reg_params[0].value, 0, 32) & FLASH_ERROR;
if (error & FLASH_WRPERR)
- {
LOG_ERROR("flash memory write protected");
- }
- if (error != 0)
- {
+ if (error != 0) {
LOG_ERROR("flash write failed = %08x", error);
/* Clear but report errors */
target_write_u32(target, STM32_FLASH_SR, error);
retval = ERROR_FAIL;
- break;
}
-
- buffer += thisrun_count * 2;
- address += thisrun_count * 2;
- count -= thisrun_count;
}
target_free_working_area(target, source);
- target_free_working_area(target, stm32x_info->write_algorithm);
+ target_free_working_area(target, write_algorithm);
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
@@ -473,14 +448,12 @@ static int stm32x_write(struct flash_bank *bank, uint8_t *buffer,
uint32_t bytes_written = 0;
int retval;
- if (bank->target->state != TARGET_HALTED)
- {
+ if (bank->target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
- if (offset & 0x1)
- {
+ if (offset & 0x1) {
LOG_WARNING("offset 0x%" PRIx32 " breaks required 2-byte alignment", offset);
return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
}
@@ -490,20 +463,16 @@ static int stm32x_write(struct flash_bank *bank, uint8_t *buffer,
return retval;
/* multiple half words (2-byte) to be programmed? */
- if (words_remaining > 0)
- {
+ if (words_remaining > 0) {
/* try using a block write */
- if ((retval = stm32x_write_block(bank, buffer, offset, words_remaining)) != ERROR_OK)
- {
- if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE)
- {
+ retval = stm32x_write_block(bank, buffer, offset, words_remaining);
+ if (retval != ERROR_OK) {
+ if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) {
/* if block write failed (no sufficient working area),
* we use normal (slow) single dword accesses */
LOG_WARNING("couldn't use block writes, falling back to single memory accesses");
}
- }
- else
- {
+ } else {
buffer += words_remaining * 2;
address += words_remaining * 2;
words_remaining = 0;
@@ -529,8 +498,7 @@ static int stm32x_write(struct flash_bank *bank, uint8_t *buffer,
Double word access in case of x64 parallelism
Wait for the BSY bit to be cleared
*/
- while (words_remaining > 0)
- {
+ while (words_remaining > 0) {
uint16_t value;
memcpy(&value, buffer + bytes_written, sizeof(uint16_t));
@@ -552,8 +520,7 @@ static int stm32x_write(struct flash_bank *bank, uint8_t *buffer,
address += 2;
}
- if (bytes_remaining)
- {
+ if (bytes_remaining) {
retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR),
FLASH_PG | FLASH_PSIZE_8);
if (retval != ERROR_OK)
@@ -572,8 +539,7 @@ static int stm32x_write(struct flash_bank *bank, uint8_t *buffer,
static void setup_sector(struct flash_bank *bank, int start, int num, int size)
{
- for (int i = start; i < (start + num) ; i++)
- {
+ for (int i = start; i < (start + num) ; i++) {
bank->sectors[i].offset = bank->size;
bank->sectors[i].size = size;
bank->size += bank->sectors[i].size;
@@ -595,7 +561,7 @@ static int stm32x_get_device_id(struct flash_bank *bank, uint32_t *device_id)
if (retval != ERROR_OK)
return retval;
- if ((*device_id & DEV_ID_MASK) == 0x411) {
+ if ((*device_id & 0xfff) == 0x411) {
/* read CPUID reg to check core type */
retval = target_read_u32(target, 0xE000ED00, &cpuid);
if (retval != ERROR_OK)
@@ -603,7 +569,7 @@ static int stm32x_get_device_id(struct flash_bank *bank, uint32_t *device_id)
/* check for cortex_m4 */
if (((cpuid >> 4) & 0xFFF) == 0xC24) {
- *device_id &= ~((0xFFFF << 16) | DEV_ID_MASK);
+ *device_id &= ~((0xFFFF << 16) | 0xfff);
*device_id |= (0x1000 << 16) | 0x413;
LOG_INFO("stm32f4x errata detected - fixing incorrect MCU_IDCODE");
}
@@ -617,6 +583,7 @@ static int stm32x_probe(struct flash_bank *bank)
struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
int i;
uint16_t flash_size_in_kb;
+ uint16_t max_flash_size_in_kb;
uint32_t device_id;
uint32_t base_address = 0x08000000;
@@ -628,33 +595,31 @@ static int stm32x_probe(struct flash_bank *bank)
return retval;
LOG_INFO("device id = 0x%08" PRIx32 "", device_id);
- /* get flash size from target. */
- retval = target_read_u16(target, 0x1FFF7A10, &flash_size_in_kb);
- if (retval != ERROR_OK) {
- LOG_WARNING("failed reading flash size, default to max target family");
- /* failed reading flash size, default to max target family */
- flash_size_in_kb = 0xffff;
- }
-
- if ((device_id & 0xfff) == 0x411) {
- /* check for early silicon */
- if (flash_size_in_kb == 0xffff) {
- /* number of sectors may be incorrrect on early silicon */
- LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 1024k flash");
- flash_size_in_kb = 1024;
- }
- } else if ((device_id & 0xfff) == 0x413) {
- /* check for early silicon */
- if (flash_size_in_kb == 0xffff) {
- /* number of sectors may be incorrrect on early silicon */
- LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 1024k flash");
- flash_size_in_kb = 1024;
- }
- } else {
+ /* set max flash size depending on family */
+ switch (device_id & 0xfff) {
+ case 0x411:
+ case 0x413:
+ max_flash_size_in_kb = 1024;
+ break;
+ case 0x419:
+ max_flash_size_in_kb = 2048;
+ break;
+ default:
LOG_WARNING("Cannot identify target as a STM32 family.");
return ERROR_FAIL;
}
+ /* get flash size from target. */
+ retval = target_read_u16(target, 0x1FFF7A22, &flash_size_in_kb);
+
+ /* failed reading flash size or flash size invalid (early silicon),
+ * default to max target family */
+ if (retval != ERROR_OK || flash_size_in_kb == 0xffff || flash_size_in_kb == 0) {
+ LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming %dk flash",
+ max_flash_size_in_kb);
+ flash_size_in_kb = max_flash_size_in_kb;
+ }
+
LOG_INFO("flash size = %dkbytes", flash_size_in_kb);
/* did we assign flash size? */
@@ -663,6 +628,10 @@ static int stm32x_probe(struct flash_bank *bank)
/* calculate numbers of pages */
int num_pages = (flash_size_in_kb / 128) + 4;
+ /* check for larger 2048 bytes devices */
+ if (flash_size_in_kb > 1024)
+ num_pages += 4;
+
/* check that calculation result makes sense */
assert(num_pages > 0);
@@ -681,7 +650,17 @@ static int stm32x_probe(struct flash_bank *bank)
setup_sector(bank, 4, 1, 64 * 1024);
/* dynamic memory */
- setup_sector(bank, 4 + 1, num_pages - 5, 128 * 1024);
+ setup_sector(bank, 4 + 1, MAX(12, num_pages) - 5, 128 * 1024);
+
+ if (num_pages > 12) {
+
+ /* fixed memory for larger devices */
+ setup_sector(bank, 12, 4, 16 * 1024);
+ setup_sector(bank, 16, 1, 64 * 1024);
+
+ /* dynamic memory for larger devices */
+ setup_sector(bank, 16 + 1, num_pages - 5 - 12, 128 * 1024);
+ }
for (i = 0; i < num_pages; i++) {
bank->sectors[i].is_erased = -1;
@@ -733,11 +712,16 @@ static int get_stm32x_info(struct flash_bank *bank, char *buf, int buf_size)
snprintf(buf, buf_size, "Y");
break;
+ case 0x2003:
+ snprintf(buf, buf_size, "X");
+ break;
+
default:
snprintf(buf, buf_size, "unknown");
break;
}
- } else if ((device_id & 0xfff) == 0x413) {
+ } else if (((device_id & 0xfff) == 0x413) ||
+ ((device_id & 0xfff) == 0x419)) {
printed = snprintf(buf, buf_size, "stm32f4x - Rev: ");
buf += printed;
buf_size -= printed;
@@ -778,7 +762,10 @@ static int stm32x_mass_erase(struct flash_bank *bank)
return retval;
/* mass erase flash memory */
- retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_MER);
+ if (bank->num_sectors > 12)
+ retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_MER | FLASH_MER1);
+ else
+ retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_MER);
if (retval != ERROR_OK)
return retval;
retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR),
@@ -857,7 +844,7 @@ struct flash_driver stm32f2x_flash = {
.read = default_flash_read,
.probe = stm32x_probe,
.auto_probe = stm32x_auto_probe,
- .erase_check = default_flash_mem_blank_check,
+ .erase_check = default_flash_blank_check,
.protect_check = stm32x_protect_check,
.info = get_stm32x_info,
};