X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=src%2Fjtag%2Fdrivers%2Fstlink_usb.c;h=b02f9d01843da99a2ee8304705b050e1ea22b043;hp=f05ffadf9e1896257426df3252ba2c7a318286d5;hb=720380f9e372d9bab19445ff300ef1cb58e70a12;hpb=717d3af0879633a5c2d2a711db126cf0091e5930 diff --git a/src/jtag/drivers/stlink_usb.c b/src/jtag/drivers/stlink_usb.c index f05ffadf9e..b02f9d0184 100644 --- a/src/jtag/drivers/stlink_usb.c +++ b/src/jtag/drivers/stlink_usb.c @@ -41,6 +41,10 @@ #include "libusb_common.h" +#ifdef HAVE_LIBUSB1 +#define USE_LIBUSB_ASYNCIO +#endif + #define ENDPOINT_IN 0x80 #define ENDPOINT_OUT 0x00 @@ -64,10 +68,18 @@ #define STLINK_V2_PID (0x3748) #define STLINK_V2_1_PID (0x374B) #define STLINK_V2_1_NO_MSD_PID (0x3752) +#define STLINK_V3_USBLOADER_PID (0x374D) +#define STLINK_V3E_PID (0x374E) +#define STLINK_V3S_PID (0x374F) +#define STLINK_V3_2VCP_PID (0x3753) -/* the current implementation of the stlink limits - * 8bit read/writes to max 64 bytes. */ +/* + * ST-Link/V1, ST-Link/V2 and ST-Link/V2.1 are full-speed USB devices and + * this limits the bulk packet size and the 8bit read/writes to max 64 bytes. + * STLINK-V3 is a high speed USB 2.0 and the limit is 512 bytes. + */ #define STLINK_MAX_RW8 (64) +#define STLINKV3_MAX_RW8 (512) /* "WAIT" responses will be retried (with exponential backoff) at * most this many times before failing to caller. @@ -77,6 +89,7 @@ enum stlink_jtag_api_version { STLINK_JTAG_API_V1 = 1, STLINK_JTAG_API_V2, + STLINK_JTAG_API_V3, }; /** */ @@ -143,6 +156,7 @@ struct stlink_usb_handle_s { #define STLINK_SWD_AP_FAULT 0x11 #define STLINK_SWD_AP_ERROR 0x12 #define STLINK_SWD_AP_PARITY_ERROR 0x13 +#define STLINK_JTAG_GET_IDCODE_ERROR 0x09 #define STLINK_JTAG_WRITE_ERROR 0x0c #define STLINK_JTAG_WRITE_VERIF_ERROR 0x0d #define STLINK_SWD_DP_WAIT 0x14 @@ -154,6 +168,8 @@ struct stlink_usb_handle_s { #define STLINK_SWD_AP_STICKY_ERROR 0x19 #define STLINK_SWD_AP_STICKYORUN_ERROR 0x1a +#define STLINK_BAD_AP_ERROR 0x1d + #define STLINK_CORE_RUNNING 0x80 #define STLINK_CORE_HALTED 0x81 #define STLINK_CORE_STAT_UNKNOWN -1 @@ -242,6 +258,8 @@ struct stlink_usb_handle_s { #define STLINK_DEBUG_APIV2_GETLASTRWSTATUS 0x3B #define STLINK_DEBUG_APIV2_DRIVE_NRST 0x3C +#define STLINK_DEBUG_APIV2_GETLASTRWSTATUS2 0x3E + #define STLINK_DEBUG_APIV2_START_TRACE_RX 0x40 #define STLINK_DEBUG_APIV2_STOP_TRACE_RX 0x41 #define STLINK_DEBUG_APIV2_GET_TRACE_NB 0x42 @@ -251,6 +269,11 @@ struct stlink_usb_handle_s { #define STLINK_DEBUG_APIV2_READMEM_16BIT 0x47 #define STLINK_DEBUG_APIV2_WRITEMEM_16BIT 0x48 +#define STLINK_APIV3_SET_COM_FREQ 0x61 +#define STLINK_APIV3_GET_COM_FREQ 0x62 + +#define STLINK_APIV3_GET_VERSION_EX 0xFB + #define STLINK_DEBUG_APIV2_DRIVE_NRST_LOW 0x00 #define STLINK_DEBUG_APIV2_DRIVE_NRST_HIGH 0x01 #define STLINK_DEBUG_APIV2_DRIVE_NRST_PULSE 0x02 @@ -258,6 +281,8 @@ struct stlink_usb_handle_s { #define STLINK_TRACE_SIZE 4096 #define STLINK_TRACE_MAX_HZ 2000000 +#define STLINK_V3_MAX_FREQ_NB 10 + /** */ enum stlink_mode { STLINK_MODE_UNKNOWN = 0, @@ -279,6 +304,7 @@ enum stlink_mode { #define STLINK_F_HAS_SWD_SET_FREQ (1UL << 1) #define STLINK_F_HAS_JTAG_SET_FREQ (1UL << 2) #define STLINK_F_HAS_MEM_16BIT (1UL << 3) +#define STLINK_F_HAS_GETLASTRWSTATUS2 (1UL << 4) /* aliases */ #define STLINK_F_HAS_TARGET_VOLT STLINK_F_HAS_TRACE @@ -319,6 +345,173 @@ static const struct speed_map stlink_khz_to_speed_map_jtag[] = { static void stlink_usb_init_buffer(void *handle, uint8_t direction, uint32_t size); static int stlink_swim_status(void *handle); +/** */ +static unsigned int stlink_usb_block(void *handle) +{ + struct stlink_usb_handle_s *h = handle; + + assert(handle != NULL); + + if (h->version.stlink == 3) + return STLINKV3_MAX_RW8; + else + return STLINK_MAX_RW8; +} + + + +#ifdef USE_LIBUSB_ASYNCIO + +static LIBUSB_CALL void sync_transfer_cb(struct libusb_transfer *transfer) +{ + int *completed = transfer->user_data; + *completed = 1; + /* caller interprets result and frees transfer */ +} + + +static void sync_transfer_wait_for_completion(struct libusb_transfer *transfer) +{ + int r, *completed = transfer->user_data; + + /* Assuming a single libusb context exists. There no existing interface into this + * module to pass a libusb context. + */ + struct libusb_context *ctx = NULL; + + while (!*completed) { + r = libusb_handle_events_completed(ctx, completed); + if (r < 0) { + if (r == LIBUSB_ERROR_INTERRUPTED) + continue; + libusb_cancel_transfer(transfer); + continue; + } + } +} + + +static int transfer_error_status(const struct libusb_transfer *transfer) +{ + int r = 0; + + switch (transfer->status) { + case LIBUSB_TRANSFER_COMPLETED: + r = 0; + break; + case LIBUSB_TRANSFER_TIMED_OUT: + r = LIBUSB_ERROR_TIMEOUT; + break; + case LIBUSB_TRANSFER_STALL: + r = LIBUSB_ERROR_PIPE; + break; + case LIBUSB_TRANSFER_OVERFLOW: + r = LIBUSB_ERROR_OVERFLOW; + break; + case LIBUSB_TRANSFER_NO_DEVICE: + r = LIBUSB_ERROR_NO_DEVICE; + break; + case LIBUSB_TRANSFER_ERROR: + case LIBUSB_TRANSFER_CANCELLED: + r = LIBUSB_ERROR_IO; + break; + default: + r = LIBUSB_ERROR_OTHER; + break; + } + + return r; +} + +struct jtag_xfer { + int ep; + uint8_t *buf; + size_t size; + /* Internal */ + int retval; + int completed; + size_t transfer_size; + struct libusb_transfer *transfer; +}; + +static int jtag_libusb_bulk_transfer_n( + jtag_libusb_device_handle * dev_handle, + struct jtag_xfer *transfers, + size_t n_transfers, + int timeout) +{ + int retval = 0; + int returnval = ERROR_OK; + + + for (size_t i = 0; i < n_transfers; ++i) { + transfers[i].retval = 0; + transfers[i].completed = 0; + transfers[i].transfer_size = 0; + transfers[i].transfer = libusb_alloc_transfer(0); + + if (transfers[i].transfer == NULL) { + for (size_t j = 0; j < i; ++j) + libusb_free_transfer(transfers[j].transfer); + + LOG_DEBUG("ERROR, failed to alloc usb transfers"); + for (size_t k = 0; k < n_transfers; ++k) + transfers[k].retval = LIBUSB_ERROR_NO_MEM; + return ERROR_FAIL; + } + } + + for (size_t i = 0; i < n_transfers; ++i) { + libusb_fill_bulk_transfer( + transfers[i].transfer, + dev_handle, + transfers[i].ep, transfers[i].buf, transfers[i].size, + sync_transfer_cb, &transfers[i].completed, timeout); + transfers[i].transfer->type = LIBUSB_TRANSFER_TYPE_BULK; + + retval = libusb_submit_transfer(transfers[i].transfer); + if (retval < 0) { + LOG_DEBUG("ERROR, failed to submit transfer %zu, error %d", i, retval); + + /* Probably no point continuing to submit transfers once a submission fails. + * As a result, tag all remaining transfers as errors. + */ + for (size_t j = i; j < n_transfers; ++j) + transfers[j].retval = retval; + + returnval = ERROR_FAIL; + break; + } + } + + /* Wait for every submitted USB transfer to complete. + */ + for (size_t i = 0; i < n_transfers; ++i) { + if (transfers[i].retval == 0) { + sync_transfer_wait_for_completion(transfers[i].transfer); + + retval = transfer_error_status(transfers[i].transfer); + if (retval) { + returnval = ERROR_FAIL; + transfers[i].retval = retval; + LOG_DEBUG("ERROR, transfer %zu failed, error %d", i, retval); + } else { + /* Assuming actual_length is only valid if there is no transfer error. + */ + transfers[i].transfer_size = transfers[i].transfer->actual_length; + } + } + + libusb_free_transfer(transfers[i].transfer); + transfers[i].transfer = NULL; + } + + return returnval; +} + +#endif + + /** */ static int stlink_usb_xfer_v1_get_status(void *handle) { @@ -352,7 +545,45 @@ static int stlink_usb_xfer_v1_get_status(void *handle) return ERROR_OK; } -/** */ +#ifdef USE_LIBUSB_ASYNCIO +static int stlink_usb_xfer_rw(void *handle, int cmdsize, const uint8_t *buf, int size) +{ + struct stlink_usb_handle_s *h = handle; + + assert(handle != NULL); + + size_t n_transfers = 0; + struct jtag_xfer transfers[2]; + + memset(transfers, 0, sizeof(transfers)); + + transfers[0].ep = h->tx_ep; + transfers[0].buf = h->cmdbuf; + transfers[0].size = cmdsize; + + ++n_transfers; + + if (h->direction == h->tx_ep && size) { + transfers[1].ep = h->tx_ep; + transfers[1].buf = (uint8_t *)buf; + transfers[1].size = size; + + ++n_transfers; + } else if (h->direction == h->rx_ep && size) { + transfers[1].ep = h->rx_ep; + transfers[1].buf = (uint8_t *)buf; + transfers[1].size = size; + + ++n_transfers; + } + + return jtag_libusb_bulk_transfer_n( + h->fd, + transfers, + n_transfers, + STLINK_WRITE_TIMEOUT); +} +#else static int stlink_usb_xfer_rw(void *handle, int cmdsize, const uint8_t *buf, int size) { struct stlink_usb_handle_s *h = handle; @@ -380,6 +611,7 @@ static int stlink_usb_xfer_rw(void *handle, int cmdsize, const uint8_t *buf, int return ERROR_OK; } +#endif /** */ static int stlink_usb_xfer_v1_get_sense(void *handle) @@ -484,6 +716,9 @@ static int stlink_usb_error_check(void *handle) case STLINK_SWD_DP_WAIT: LOG_DEBUG("wait status SWD_DP_WAIT (0x%x)", STLINK_SWD_DP_WAIT); return ERROR_WAIT; + case STLINK_JTAG_GET_IDCODE_ERROR: + LOG_DEBUG("STLINK_JTAG_GET_IDCODE_ERROR"); + return ERROR_FAIL; case STLINK_JTAG_WRITE_ERROR: LOG_DEBUG("Write error"); return ERROR_FAIL; @@ -522,6 +757,9 @@ static int stlink_usb_error_check(void *handle) case STLINK_SWD_AP_STICKYORUN_ERROR: LOG_DEBUG("STLINK_SWD_AP_STICKYORUN_ERROR"); return ERROR_FAIL; + case STLINK_BAD_AP_ERROR: + LOG_DEBUG("STLINK_BAD_AP_ERROR"); + return ERROR_FAIL; default: LOG_DEBUG("unknown/unexpected STLINK status code 0x%x", h->databuf[0]); return ERROR_FAIL; @@ -557,7 +795,9 @@ static int stlink_cmd_allow_retry(void *handle, const uint8_t *buf, int size) res = stlink_usb_error_check(handle); if (res == ERROR_WAIT && retries < MAX_WAIT_RETRIES) { - usleep((1<databuf[0] << 8) | h->databuf[1]; + version = be_to_h_u16(h->databuf); + v = (version >> 12) & 0x0f; + x = (version >> 6) & 0x3f; + y = version & 0x3f; + + h->vid = le_to_h_u16(h->databuf + 2); + h->pid = le_to_h_u16(h->databuf + 4); + + switch (h->pid) { + case STLINK_V2_1_PID: + case STLINK_V2_1_NO_MSD_PID: + if ((x <= 22 && y == 7) || (x >= 25 && y >= 7 && y <= 12)) { + /* MxSy : STM8 V2.1 - SWIM only */ + msd = x; + swim = y; + jtag = 0; + } else { + /* JxMy : STM32 V2.1 - JTAG/SWD only */ + jtag = x; + msd = y; + swim = 0; + } + break; + default: + jtag = x; + swim = y; + msd = 0; + break; + } + + /* STLINK-V3 requires a specific command */ + if (v == 3 && x == 0 && y == 0) { + stlink_usb_init_buffer(handle, h->rx_ep, 16); - h->version.stlink = (v >> 12) & 0x0f; - h->version.jtag = (v >> 6) & 0x3f; - h->version.swim = v & 0x3f; - h->vid = buf_get_u32(h->databuf, 16, 16); - h->pid = buf_get_u32(h->databuf, 32, 16); + h->cmdbuf[h->cmdidx++] = STLINK_APIV3_GET_VERSION_EX; + + res = stlink_usb_xfer(handle, h->databuf, 12); + if (res != ERROR_OK) + return res; + + v = h->databuf[0]; + swim = h->databuf[1]; + jtag = h->databuf[2]; + msd = h->databuf[3]; + bridge = h->databuf[4]; + h->vid = le_to_h_u16(h->databuf + 8); + h->pid = le_to_h_u16(h->databuf + 10); + } + + h->version.stlink = v; + h->version.jtag = jtag; + h->version.swim = swim; flags = 0; switch (h->version.stlink) { @@ -675,6 +963,10 @@ static int stlink_usb_version(void *handle) if (h->version.jtag >= 13) flags |= STLINK_F_HAS_TRACE; + /* preferred API to get last R/W status from J15 */ + if (h->version.jtag >= 15) + flags |= STLINK_F_HAS_GETLASTRWSTATUS2; + /* API to set SWD frequency from J22 */ if (h->version.jtag >= 22) flags |= STLINK_F_HAS_SWD_SET_FREQ; @@ -687,17 +979,43 @@ static int stlink_usb_version(void *handle) if (h->version.jtag >= 26) flags |= STLINK_F_HAS_MEM_16BIT; + break; + case 3: + /* all STLINK-V3 use api-v3 */ + h->version.jtag_api = STLINK_JTAG_API_V3; + + /* STLINK-V3 is a superset of ST-LINK/V2 */ + + /* API for trace */ + /* API for target voltage */ + flags |= STLINK_F_HAS_TRACE; + + /* preferred API to get last R/W status */ + flags |= STLINK_F_HAS_GETLASTRWSTATUS2; + + /* API to read/write memory at 16 bit */ + flags |= STLINK_F_HAS_MEM_16BIT; + break; default: break; } h->version.flags = flags; - LOG_INFO("STLINK v%d JTAG v%d API v%d SWIM v%d VID 0x%04X PID 0x%04X", - h->version.stlink, - h->version.jtag, - (h->version.jtag_api == STLINK_JTAG_API_V1) ? 1 : 2, - h->version.swim, + p = v_str; + p += sprintf(p, "V%d", v); + if (jtag || !msd) + p += sprintf(p, "J%d", jtag); + if (msd) + p += sprintf(p, "M%d", msd); + if (bridge) + p += sprintf(p, "B%d", bridge); + if (swim || !msd) + sprintf(p, "S%d", swim); + + LOG_INFO("STLINK %s (API v%d) VID:PID %04X:%04X", + v_str, + h->version.jtag_api, h->vid, h->pid); @@ -818,7 +1136,7 @@ static int stlink_usb_mode_enter(void *handle, enum stlink_mode type) * status * TODO: we need the test on api V1 too */ - if (h->version.jtag_api == STLINK_JTAG_API_V2) + if (h->version.jtag_api != STLINK_JTAG_API_V1) rx_size = 2; stlink_usb_init_buffer(handle, h->rx_ep, rx_size); @@ -1368,7 +1686,7 @@ static enum target_state stlink_usb_state(void *handle) h->reconnect_pending = false; } - if (h->version.jtag_api == STLINK_JTAG_API_V2) { + if (h->version.jtag_api != STLINK_JTAG_API_V1) { res = stlink_usb_v2_get_status(handle); if (res == TARGET_UNKNOWN) h->reconnect_pending = true; @@ -1510,7 +1828,7 @@ static int stlink_usb_run(void *handle) assert(handle != NULL); - if (h->version.jtag_api == STLINK_JTAG_API_V2) { + if (h->version.jtag_api != STLINK_JTAG_API_V1) { res = stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_DEBUGEN); return res; @@ -1532,7 +1850,7 @@ static int stlink_usb_halt(void *handle) assert(handle != NULL); - if (h->version.jtag_api == STLINK_JTAG_API_V2) { + if (h->version.jtag_api != STLINK_JTAG_API_V1) { res = stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_HALT|C_DEBUGEN); return res; @@ -1553,7 +1871,7 @@ static int stlink_usb_step(void *handle) assert(handle != NULL); - if (h->version.jtag_api == STLINK_JTAG_API_V2) { + if (h->version.jtag_api != STLINK_JTAG_API_V1) { /* TODO: this emulates the v1 api, it should really use a similar auto mask isr * that the Cortex-M3 currently does. */ stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_HALT|C_MASKINTS|C_DEBUGEN); @@ -1659,9 +1977,15 @@ static int stlink_usb_get_rw_status(void *handle) stlink_usb_init_buffer(handle, h->rx_ep, 2); h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; - h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_GETLASTRWSTATUS; + if (h->version.flags & STLINK_F_HAS_GETLASTRWSTATUS2) { + h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_GETLASTRWSTATUS2; - res = stlink_usb_xfer(handle, h->databuf, 2); + res = stlink_usb_xfer(handle, h->databuf, 12); + } else { + h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_GETLASTRWSTATUS; + + res = stlink_usb_xfer(handle, h->databuf, 2); + } if (res != ERROR_OK) return res; @@ -1679,9 +2003,9 @@ static int stlink_usb_read_mem8(void *handle, uint32_t addr, uint16_t len, assert(handle != NULL); - /* max 8bit read/write is 64bytes */ - if (len > STLINK_MAX_RW8) { - LOG_DEBUG("max buffer length exceeded"); + /* max 8 bit read/write is 64 bytes or 512 bytes for v3 */ + if (len > stlink_usb_block(h)) { + LOG_DEBUG("max buffer (%d) length exceeded", stlink_usb_block(h)); return ERROR_FAIL; } @@ -1717,9 +2041,9 @@ static int stlink_usb_write_mem8(void *handle, uint32_t addr, uint16_t len, assert(handle != NULL); - /* max 8bit read/write is 64bytes */ - if (len > STLINK_MAX_RW8) { - LOG_DEBUG("max buffer length exceeded"); + /* max 8 bit read/write is 64 bytes or 512 bytes for v3 */ + if (len > stlink_usb_block(h)) { + LOG_DEBUG("max buffer length (%d) exceeded", stlink_usb_block(h)); return ERROR_FAIL; } @@ -1904,7 +2228,7 @@ static int stlink_usb_read_mem(void *handle, uint32_t addr, uint32_t size, while (count) { bytes_remaining = (size != 1) ? \ - stlink_max_block_size(h->max_mem_packet, addr) : STLINK_MAX_RW8; + stlink_max_block_size(h->max_mem_packet, addr) : stlink_usb_block(h); if (count < bytes_remaining) bytes_remaining = count; @@ -1989,7 +2313,7 @@ static int stlink_usb_write_mem(void *handle, uint32_t addr, uint32_t size, while (count) { bytes_remaining = (size != 1) ? \ - stlink_max_block_size(h->max_mem_packet, addr) : STLINK_MAX_RW8; + stlink_max_block_size(h->max_mem_packet, addr) : stlink_usb_block(h); if (count < bytes_remaining) bytes_remaining = count; @@ -2082,9 +2406,13 @@ static int stlink_match_speed_map(const struct speed_map *map, unsigned int map_ unsigned int i; int speed_index = -1; int speed_diff = INT_MAX; + int last_valid_speed = -1; bool match = true; for (i = 0; i < map_size; i++) { + if (!map[i].speed) + continue; + last_valid_speed = i; if (khz == map[i].speed) { speed_index = i; break; @@ -2102,7 +2430,7 @@ static int stlink_match_speed_map(const struct speed_map *map, unsigned int map_ if (speed_index == -1) { /* this will only be here if we cannot match the slow speed. * use the slowest speed we support.*/ - speed_index = map_size - 1; + speed_index = last_valid_speed; match = false; } else if (i == map_size) match = false; @@ -2167,7 +2495,84 @@ void stlink_dump_speed_map(const struct speed_map *map, unsigned int map_size) LOG_DEBUG("Supported clock speeds are:"); for (i = 0; i < map_size; i++) - LOG_DEBUG("%d kHz", map[i].speed); + if (map[i].speed) + LOG_DEBUG("%d kHz", map[i].speed); +} + +static int stlink_get_com_freq(void *handle, bool is_jtag, struct speed_map *map) +{ + struct stlink_usb_handle_s *h = handle; + int i; + + if (h->version.jtag_api != STLINK_JTAG_API_V3) { + LOG_ERROR("Unknown command"); + return 0; + } + + stlink_usb_init_buffer(handle, h->rx_ep, 16); + + h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; + h->cmdbuf[h->cmdidx++] = STLINK_APIV3_GET_COM_FREQ; + h->cmdbuf[h->cmdidx++] = is_jtag ? 1 : 0; + + int res = stlink_usb_xfer(handle, h->databuf, 52); + + int size = h->databuf[8]; + + if (size > STLINK_V3_MAX_FREQ_NB) + size = STLINK_V3_MAX_FREQ_NB; + + for (i = 0; i < size; i++) { + map[i].speed = le_to_h_u32(&h->databuf[12 + 4 * i]); + map[i].speed_divisor = i; + } + + /* set to zero all the next entries */ + for (i = size; i < STLINK_V3_MAX_FREQ_NB; i++) + map[i].speed = 0; + + return res; +} + +static int stlink_set_com_freq(void *handle, bool is_jtag, unsigned int frequency) +{ + struct stlink_usb_handle_s *h = handle; + + if (h->version.jtag_api != STLINK_JTAG_API_V3) { + LOG_ERROR("Unknown command"); + return 0; + } + + stlink_usb_init_buffer(handle, h->rx_ep, 16); + + h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; + h->cmdbuf[h->cmdidx++] = STLINK_APIV3_SET_COM_FREQ; + h->cmdbuf[h->cmdidx++] = is_jtag ? 1 : 0; + h->cmdbuf[h->cmdidx++] = 0; + + h_u32_to_le(&h->cmdbuf[4], frequency); + + return stlink_usb_xfer(handle, h->databuf, 8); +} + +static int stlink_speed_v3(void *handle, bool is_jtag, int khz, bool query) +{ + struct stlink_usb_handle_s *h = handle; + int speed_index; + struct speed_map map[STLINK_V3_MAX_FREQ_NB]; + + stlink_get_com_freq(h, is_jtag, map); + + speed_index = stlink_match_speed_map(map, ARRAY_SIZE(map), khz, query); + + if (!query) { + int result = stlink_set_com_freq(h, is_jtag, map[speed_index].speed); + if (result != ERROR_OK) { + LOG_ERROR("Unable to set adapter speed"); + return khz; + } + } + return map[speed_index].speed; } static int stlink_speed(void *handle, int khz, bool query) @@ -2177,12 +2582,25 @@ static int stlink_speed(void *handle, int khz, bool query) if (!handle) return khz; - if (h->transport == HL_TRANSPORT_SWIM) + switch (h->transport) { + case HL_TRANSPORT_SWIM: return stlink_speed_swim(handle, khz, query); - else if (h->transport == HL_TRANSPORT_SWD) - return stlink_speed_swd(handle, khz, query); - else if (h->transport == HL_TRANSPORT_JTAG) - return stlink_speed_jtag(handle, khz, query); + break; + case HL_TRANSPORT_SWD: + if (h->version.jtag_api == STLINK_JTAG_API_V3) + return stlink_speed_v3(handle, false, khz, query); + else + return stlink_speed_swd(handle, khz, query); + break; + case HL_TRANSPORT_JTAG: + if (h->version.jtag_api == STLINK_JTAG_API_V3) + return stlink_speed_v3(handle, true, khz, query); + else + return stlink_speed_jtag(handle, khz, query); + break; + default: + break; + } return khz; } @@ -2295,6 +2713,14 @@ static int stlink_usb_open(struct hl_interface_param_s *param, void **fd) h->version.stlink = 1; h->tx_ep = STLINK_TX_EP; break; + case STLINK_V3_USBLOADER_PID: + case STLINK_V3E_PID: + case STLINK_V3S_PID: + case STLINK_V3_2VCP_PID: + h->version.stlink = 3; + h->tx_ep = STLINK_V2_1_TX_EP; + h->trace_ep = STLINK_V2_1_TRACE_EP; + break; case STLINK_V2_1_PID: case STLINK_V2_1_NO_MSD_PID: h->version.stlink = 2; @@ -2399,6 +2825,14 @@ static int stlink_usb_open(struct hl_interface_param_s *param, void **fd) } } + if (h->version.jtag_api == STLINK_JTAG_API_V3) { + struct speed_map map[STLINK_V3_MAX_FREQ_NB]; + + stlink_get_com_freq(h, (h->transport == HL_TRANSPORT_JTAG), map); + stlink_dump_speed_map(map, ARRAY_SIZE(map)); + stlink_speed(h, param->initial_interface_speed, false); + } + /* get cpuid, so we can determine the max page size * start with a safe default */ h->max_mem_packet = (1 << 10);