X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=src%2Fjtag%2Fft2232.c;h=319760a890aa263f7136954556aebe695a414b23;hp=e7b2e8becdf08e16e364d1c6e527a4d7d7c0c597;hb=ff2737b429f563c57ab255fa2479725c9f057028;hpb=45e44118a8572e601e5b462246e02d3ba895928f diff --git a/src/jtag/ft2232.c b/src/jtag/ft2232.c index e7b2e8becd..319760a890 100644 --- a/src/jtag/ft2232.c +++ b/src/jtag/ft2232.c @@ -1,46 +1,59 @@ /*************************************************************************** - * Copyright (C) 2004, 2006 by Dominic Rath * - * Dominic.Rath@gmx.de * - * * - * Copyright (C) 2008 by Spencer Oliver * - * spen@spen-soft.co.uk * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License as published by * - * the Free Software Foundation; either version 2 of the License, or * - * (at your option) any later version. * - * * - * This program is distributed in the hope that it will be useful, * - * but WITHOUT ANY WARRANTY; without even the implied warranty of * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * - * GNU General Public License for more details. * - * * - * You should have received a copy of the GNU General Public License * - * along with this program; if not, write to the * - * Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - ***************************************************************************/ +* Copyright (C) 2004, 2006 by Dominic Rath * +* Dominic.Rath@gmx.de * +* * +* Copyright (C) 2008 by Spencer Oliver * +* spen@spen-soft.co.uk * +* * +* Copyright (C) 2009 by SoftPLC Corporation. http://softplc.com * +* Dick Hollenbeck * +* * +* This program is free software; you can redistribute it and/or modify * +* it under the terms of the GNU General Public License as published by * +* the Free Software Foundation; either version 2 of the License, or * +* (at your option) any later version. * +* * +* This program is distributed in the hope that it will be useful, * +* but WITHOUT ANY WARRANTY; without even the implied warranty of * +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * +* GNU General Public License for more details. * +* * +* You should have received a copy of the GNU General Public License * +* along with this program; if not, write to the * +* Free Software Foundation, Inc., * +* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * +***************************************************************************/ + + +/* This code uses information contained in the MPSSE specification which was + * found here: + * http://www.ftdichip.com/Documents/AppNotes/AN2232C-01_MPSSE_Cmnd.pdf + * Hereafter this is called the "MPSSE Spec". + * + * The datasheet for the ftdichip.com's FT2232D part is here: + * http://www.ftdichip.com/Documents/DataSheets/DS_FT2232D.pdf + */ + + #ifdef HAVE_CONFIG_H #include "config.h" #endif -#if IS_CYGWIN == 1 -#include "windows.h" -#endif - -#include "replacements.h" - /* project specific includes */ -#include "log.h" -#include "types.h" #include "jtag.h" -#include "configuration.h" #include "time_support.h" -/* system includes */ -#include -#include -#include +#if IS_CYGWIN == 1 +#include +#endif + +#include + +#if (BUILD_FT2232_FTD2XX==1 && BUILD_FT2232_LIBFTDI==1) +#error "BUILD_FT2232_FTD2XX && BUILD_FT2232_LIBFTDI are mutually exclusive" +#elif(BUILD_FT2232_FTD2XX!=1 && BUILD_FT2232_LIBFTDI!=1) +#error "BUILD_FT2232_FTD2XX || BUILD_FT2232_LIBFTDI must be chosen" +#endif /* FT2232 access library includes */ #if BUILD_FT2232_FTD2XX == 1 @@ -49,132 +62,280 @@ #include #endif -/* enable this to debug io latency - */ -#if 0 -#define _DEBUG_USB_IO_ -#endif +/* max TCK for the high speed devices 30000 kHz */ +#define FTDI_2232H_4232H_MAX_TCK 30000 -/* enable this to debug communication - */ -#if 0 -#define _DEBUG_USB_COMMS_ -#endif +static int ft2232_execute_queue(void); -int ft2232_execute_queue(void); +static int ft2232_speed(int speed); +static int ft2232_speed_div(int speed, int* khz); +static int ft2232_khz(int khz, int* jtag_speed); +static int ft2232_register_commands(struct command_context_s* cmd_ctx); +static int ft2232_init(void); +static int ft2232_quit(void); -int ft2232_speed(int speed); -int ft2232_speed_div(int speed, int *khz); -int ft2232_khz(int khz, int *jtag_speed); -int ft2232_register_commands(struct command_context_s *cmd_ctx); -int ft2232_init(void); -int ft2232_quit(void); +static int ft2232_handle_device_desc_command(struct command_context_s* cmd_ctx, char* cmd, char** args, int argc); +static int ft2232_handle_serial_command(struct command_context_s* cmd_ctx, char* cmd, char** args, int argc); +static int ft2232_handle_layout_command(struct command_context_s* cmd_ctx, char* cmd, char** args, int argc); +static int ft2232_handle_vid_pid_command(struct command_context_s* cmd_ctx, char* cmd, char** args, int argc); +static int ft2232_handle_latency_command(struct command_context_s* cmd_ctx, char* cmd, char** args, int argc); -int ft2232_handle_device_desc_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc); -int ft2232_handle_serial_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc); -int ft2232_handle_layout_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc); -int ft2232_handle_vid_pid_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc); -int ft2232_handle_latency_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc); -char *ft2232_device_desc = NULL; -char *ft2232_serial = NULL; -char *ft2232_layout = NULL; -unsigned char ft2232_latency = 2; +/** + * Function ft2232_stableclocks + * will send out \a num_cycles on the TCK line while the TAP(s) + * are in a stable state. Calling code must ensure that current state is + * stable, that verification is not done in here. + * @param num_cycles is the count of clocks cycles to send. + * @return int - ERROR_OK or ERROR_JTAG_QUEUE_FAILED + */ +static int ft2232_stableclocks(int num_cycles, jtag_command_t* cmd); + + +static char * ft2232_device_desc_A = NULL; +static char* ft2232_device_desc = NULL; +static char* ft2232_serial = NULL; +static char* ft2232_layout = NULL; +static u8 ft2232_latency = 2; +static unsigned ft2232_max_tck = 6000; + -#define MAX_USB_IDS 8 +#define MAX_USB_IDS 8 /* vid = pid = 0 marks the end of the list */ -static u16 ft2232_vid[MAX_USB_IDS+1] = { 0x0403, 0 }; -static u16 ft2232_pid[MAX_USB_IDS+1] = { 0x6010, 0 }; +static u16 ft2232_vid[MAX_USB_IDS + 1] = { 0x0403, 0 }; +static u16 ft2232_pid[MAX_USB_IDS + 1] = { 0x6010, 0 }; typedef struct ft2232_layout_s { char* name; - int(*init)(void); - void(*reset)(int trst, int srst); - void(*blink)(void); + int (*init)(void); + void (*reset)(int trst, int srst); + void (*blink)(void); } ft2232_layout_t; /* init procedures for supported layouts */ -int usbjtag_init(void); -int jtagkey_init(void); -int olimex_jtag_init(void); -int flyswatter_init(void); -int turtle_init(void); -int comstick_init(void); -int stm32stick_init(void); -int axm0432_jtag_init(void); +static int usbjtag_init(void); +static int jtagkey_init(void); +static int olimex_jtag_init(void); +static int flyswatter_init(void); +static int turtle_init(void); +static int comstick_init(void); +static int stm32stick_init(void); +static int axm0432_jtag_init(void); +static int sheevaplug_init(void); +static int icebear_jtag_init(void); +static int cortino_jtag_init(void); /* reset procedures for supported layouts */ -void usbjtag_reset(int trst, int srst); -void jtagkey_reset(int trst, int srst); -void olimex_jtag_reset(int trst, int srst); -void flyswatter_reset(int trst, int srst); -void turtle_reset(int trst, int srst); -void comstick_reset(int trst, int srst); -void stm32stick_reset(int trst, int srst); -void axm0432_jtag_reset(int trst, int srst); +static void usbjtag_reset(int trst, int srst); +static void jtagkey_reset(int trst, int srst); +static void olimex_jtag_reset(int trst, int srst); +static void flyswatter_reset(int trst, int srst); +static void turtle_reset(int trst, int srst); +static void comstick_reset(int trst, int srst); +static void stm32stick_reset(int trst, int srst); +static void axm0432_jtag_reset(int trst, int srst); +static void sheevaplug_reset(int trst, int srst); +static void icebear_jtag_reset(int trst, int srst); /* blink procedures for layouts that support a blinking led */ -void olimex_jtag_blink(void); -void turtle_jtag_blink(void); - -ft2232_layout_t ft2232_layouts[] = -{ - {"usbjtag", usbjtag_init, usbjtag_reset, NULL}, - {"jtagkey", jtagkey_init, jtagkey_reset, NULL}, - {"jtagkey_prototype_v1", jtagkey_init, jtagkey_reset, NULL}, - {"oocdlink", jtagkey_init, jtagkey_reset, NULL}, - {"signalyzer", usbjtag_init, usbjtag_reset, NULL}, - {"evb_lm3s811", usbjtag_init, usbjtag_reset, NULL}, - {"olimex-jtag", olimex_jtag_init, olimex_jtag_reset, olimex_jtag_blink}, - {"flyswatter", flyswatter_init, flyswatter_reset, NULL}, - {"turtelizer2", turtle_init, turtle_reset, turtle_jtag_blink}, - {"comstick", comstick_init, comstick_reset, NULL}, - {"stm32stick", stm32stick_init, stm32stick_reset, NULL}, - {"axm0432_jtag", axm0432_jtag_init, axm0432_jtag_reset, NULL}, - {NULL, NULL, NULL}, +static void olimex_jtag_blink(void); +static void flyswatter_jtag_blink(void); +static void turtle_jtag_blink(void); + +ft2232_layout_t ft2232_layouts[] = +{ + { "usbjtag", usbjtag_init, usbjtag_reset, NULL }, + { "jtagkey", jtagkey_init, jtagkey_reset, NULL }, + { "jtagkey_prototype_v1", jtagkey_init, jtagkey_reset, NULL }, + { "oocdlink", jtagkey_init, jtagkey_reset, NULL }, + { "signalyzer", usbjtag_init, usbjtag_reset, NULL }, + { "evb_lm3s811", usbjtag_init, usbjtag_reset, NULL }, + { "olimex-jtag", olimex_jtag_init, olimex_jtag_reset, olimex_jtag_blink }, + { "flyswatter", flyswatter_init, flyswatter_reset, flyswatter_jtag_blink }, + { "turtelizer2", turtle_init, turtle_reset, turtle_jtag_blink }, + { "comstick", comstick_init, comstick_reset, NULL }, + { "stm32stick", stm32stick_init, stm32stick_reset, NULL }, + { "axm0432_jtag", axm0432_jtag_init, axm0432_jtag_reset, NULL }, + { "sheevaplug", sheevaplug_init, sheevaplug_reset, NULL }, + { "icebear", icebear_jtag_init, icebear_jtag_reset, NULL }, + { "cortino", cortino_jtag_init, comstick_reset, NULL }, + { NULL, NULL, NULL, NULL }, }; -static u8 nTRST, nTRSTnOE, nSRST, nSRSTnOE; +static u8 nTRST, nTRSTnOE, nSRST, nSRSTnOE; -static ft2232_layout_t *layout; -static u8 low_output = 0x0; -static u8 low_direction = 0x0; -static u8 high_output = 0x0; -static u8 high_direction = 0x0; +static ft2232_layout_t* layout; +static u8 low_output = 0x0; +static u8 low_direction = 0x0; +static u8 high_output = 0x0; +static u8 high_direction = 0x0; #if BUILD_FT2232_FTD2XX == 1 -static FT_HANDLE ftdih = NULL; +static FT_HANDLE ftdih = NULL; #elif BUILD_FT2232_LIBFTDI == 1 static struct ftdi_context ftdic; #endif -static u8 *ft2232_buffer = NULL; -static int ft2232_buffer_size = 0; -static int ft2232_read_pointer = 0; -static int ft2232_expect_read = 0; -#define FT2232_BUFFER_SIZE 131072 -#define BUFFER_ADD ft2232_buffer[ft2232_buffer_size++] -#define BUFFER_READ ft2232_buffer[ft2232_read_pointer++] + +static jtag_command_t* first_unsent; /* next command that has to be sent */ +static int require_send; + + +/* http://urjtag.wiki.sourceforge.net/Cable+FT2232 says: + + "There is a significant difference between libftdi and libftd2xx. The latter + one allows to schedule up to 64*64 bytes of result data while libftdi fails + with more than 4*64. As a consequence, the FT2232 driver is forced to + perform around 16x more USB transactions for long command streams with TDO + capture when running with libftdi." + + No idea how we get + #define FT2232_BUFFER_SIZE 131072 + a comment would have been nice. +*/ + +#define FT2232_BUFFER_SIZE 131072 + +static u8* ft2232_buffer = NULL; +static int ft2232_buffer_size = 0; +static int ft2232_read_pointer = 0; +static int ft2232_expect_read = 0; + +/** + * Function buffer_write + * writes a byte into the byte buffer, "ft2232_buffer", which must be sent later. + * @param val is the byte to send. + */ +static inline void buffer_write( u8 val ) +{ + assert( ft2232_buffer ); + assert( (unsigned) ft2232_buffer_size < (unsigned) FT2232_BUFFER_SIZE ); + ft2232_buffer[ft2232_buffer_size++] = val; +} + +/** + * Function buffer_read + * returns a byte from the byte buffer. + */ +static inline u8 buffer_read(void) +{ + assert( ft2232_buffer ); + assert( ft2232_read_pointer < ft2232_buffer_size ); + return ft2232_buffer[ft2232_read_pointer++]; +} + + +/** + * Function clock_tms + * clocks out \a bit_count bits on the TMS line, starting with the least + * significant bit of tms_bits and progressing to more significant bits. + * Rigorous state transition logging is done here via tap_set_state(). + * + * @param pmsse_cmd is one of the MPSSE TMS oriented commands such as 0x4b or 0x6b. See + * the MPSSE spec referenced above for their functionality. The MPSSE command + * "Clock Data to TMS/CS Pin (no Read)" is often used for this, 0x4b. + * + * @param tms_bits holds the sequence of bits to send. + * @param tms_count tells how many bits in the sequence. + * @param tdi_bit is a single bit which is passed on to TDI before the first TCK cycle + * and is held static for the duration of TMS clocking. See the MPSSE spec referenced above. + */ +static void clock_tms( u8 mpsse_cmd, int tms_bits, int tms_count, bool tdi_bit ) +{ + u8 tms_byte; + int i; + int tms_ndx; /* bit index into tms_byte */ + + assert( tms_count > 0 ); + +// LOG_DEBUG("mpsse cmd=%02x, tms_bits=0x%08x, bit_count=%d", mpsse_cmd, tms_bits, tms_count ); + + for (tms_byte = tms_ndx = i = 0; i < tms_count; ++i, tms_bits>>=1) + { + bool bit = tms_bits & 1; + + if(bit) + tms_byte |= (1<> 8) & 0xff; /* valueH */ + buf[0] = 0x86; /* command "set divisor" */ + buf[1] = speed & 0xff; /* valueL (0=6MHz, 1=3MHz, 2=2.0MHz, ...*/ + buf[2] = (speed >> 8) & 0xff; /* valueH */ LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if (((retval = ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) + if ( ( ( retval = ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) { LOG_ERROR("couldn't set FT2232 TCK speed"); return retval; @@ -266,24 +431,27 @@ int ft2232_speed(int speed) return ERROR_OK; } -int ft2232_speed_div(int speed, int *khz) + +static int ft2232_speed_div(int speed, int* khz) { /* Take a look in the FT2232 manual, * AN2232C-01 Command Processor for * MPSSE and MCU Host Bus. Chapter 3.8 */ - *khz = 6000 / (1+speed); + *khz = ft2232_max_tck / (1 + speed); return ERROR_OK; } -int ft2232_khz(int khz, int *jtag_speed) + +static int ft2232_khz(int khz, int* jtag_speed) { if (khz==0) { - LOG_ERROR("RCLK not supported"); + LOG_DEBUG("RTCK not supported"); return ERROR_FAIL; } + /* Take a look in the FT2232 manual, * AN2232C-01 Command Processor for * MPSSE and MCU Host Bus. Chapter 3.8 @@ -291,9 +459,9 @@ int ft2232_khz(int khz, int *jtag_speed) * We will calc here with a multiplier * of 10 for better rounding later. */ - /* Calc speed, (6000 / khz) - 1 */ + /* Calc speed, (ft2232_max_tck / khz) - 1 */ /* Use 65000 for better rounding */ - *jtag_speed = (60000 / khz) - 10; + *jtag_speed = ((ft2232_max_tck*10) / khz) - 10; /* Add 0.9 for rounding */ *jtag_speed += 9; @@ -316,61 +484,64 @@ int ft2232_khz(int khz, int *jtag_speed) return ERROR_OK; } -int ft2232_register_commands(struct command_context_s *cmd_ctx) + +static int ft2232_register_commands(struct command_context_s* cmd_ctx) { register_command(cmd_ctx, NULL, "ft2232_device_desc", ft2232_handle_device_desc_command, - COMMAND_CONFIG, "the USB device description of the FTDI FT2232 device"); + COMMAND_CONFIG, "the USB device description of the FTDI FT2232 device"); register_command(cmd_ctx, NULL, "ft2232_serial", ft2232_handle_serial_command, - COMMAND_CONFIG, "the serial number of the FTDI FT2232 device"); + COMMAND_CONFIG, "the serial number of the FTDI FT2232 device"); register_command(cmd_ctx, NULL, "ft2232_layout", ft2232_handle_layout_command, - COMMAND_CONFIG, "the layout of the FT2232 GPIO signals used to control output-enables and reset signals"); + COMMAND_CONFIG, "the layout of the FT2232 GPIO signals used to control output-enables and reset signals"); register_command(cmd_ctx, NULL, "ft2232_vid_pid", ft2232_handle_vid_pid_command, - COMMAND_CONFIG, "the vendor ID and product ID of the FTDI FT2232 device"); + COMMAND_CONFIG, "the vendor ID and product ID of the FTDI FT2232 device"); register_command(cmd_ctx, NULL, "ft2232_latency", ft2232_handle_latency_command, - COMMAND_CONFIG, "set the FT2232 latency timer to a new value"); + COMMAND_CONFIG, "set the FT2232 latency timer to a new value"); return ERROR_OK; } -void ft2232_end_state(enum tap_state state) + +void ft2232_end_state(tap_state_t state) { - if (tap_move_map[state] != -1) - end_state = state; + if (tap_is_state_stable(state)) + tap_set_end_state(state); else { - LOG_ERROR("BUG: %i is not a valid end state", state); + LOG_ERROR("BUG: %s is not a stable end state", tap_state_name(state)); exit(-1); } } -void ft2232_read_scan(enum scan_type type, u8* buffer, int scan_size) + +static void ft2232_read_scan(enum scan_type type, u8* buffer, int scan_size) { - int num_bytes = ((scan_size + 7) / 8); + int num_bytes = (scan_size + 7) / 8; int bits_left = scan_size; - int cur_byte = 0; + int cur_byte = 0; - while(num_bytes-- > 1) + while (num_bytes-- > 1) { - buffer[cur_byte] = BUFFER_READ; - cur_byte++; + buffer[cur_byte++] = buffer_read(); bits_left -= 8; } buffer[cur_byte] = 0x0; + /* There is one more partial byte left from the clock data in/out instructions */ if (bits_left > 1) { - buffer[cur_byte] = BUFFER_READ >> 1; + buffer[cur_byte] = buffer_read() >> 1; } - - buffer[cur_byte] = (buffer[cur_byte] | ((BUFFER_READ & 0x02) << 6)) >> (8 - bits_left); - + /* This shift depends on the length of the clock data to tms instruction, insterted at end of the scan, now fixed to a two step transition in ft2232_add_scan */ + buffer[cur_byte] = ( buffer[cur_byte] | ( ( (buffer_read()) << 1 ) & 0x80 )) >> (8 - bits_left); } -void ft2232_debug_dump_buffer(void) + +static void ft2232_debug_dump_buffer(void) { - int i; - char line[256]; - char *line_p = line; + int i; + char line[256]; + char* line_p = line; for (i = 0; i < ft2232_buffer_size; i++) { @@ -386,19 +557,20 @@ void ft2232_debug_dump_buffer(void) LOG_DEBUG("%s", line); } -int ft2232_send_and_recv(jtag_command_t *first, jtag_command_t *last) + +static int ft2232_send_and_recv(jtag_command_t* first, jtag_command_t* last) { - jtag_command_t *cmd; - u8 *buffer; - int scan_size; - enum scan_type type; - int retval; - u32 bytes_written; - u32 bytes_read; + jtag_command_t* cmd; + u8* buffer; + int scan_size; + enum scan_type type; + int retval; + u32 bytes_written=0; + u32 bytes_read=0; #ifdef _DEBUG_USB_IO_ - struct timeval start, inter, inter2, end; - struct timeval d_inter, d_inter2, d_end; + struct timeval start, inter, inter2, end; + struct timeval d_inter, d_inter2, d_end; #endif #ifdef _DEBUG_USB_COMMS_ @@ -410,7 +582,7 @@ int ft2232_send_and_recv(jtag_command_t *first, jtag_command_t *last) gettimeofday(&start, NULL); #endif - if ((retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written)) != ERROR_OK) + if ( ( retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written) ) != ERROR_OK ) { LOG_ERROR("couldn't write MPSSE commands to FT2232"); return retval; @@ -429,7 +601,7 @@ int ft2232_send_and_recv(jtag_command_t *first, jtag_command_t *last) gettimeofday(&inter2, NULL); #endif - if ((retval = ft2232_read(ft2232_buffer, ft2232_expect_read, &bytes_read)) != ERROR_OK) + if ( ( retval = ft2232_read(ft2232_buffer, ft2232_expect_read, &bytes_read) ) != ERROR_OK ) { LOG_ERROR("couldn't read from FT2232"); return retval; @@ -442,15 +614,19 @@ int ft2232_send_and_recv(jtag_command_t *first, jtag_command_t *last) timeval_subtract(&d_inter2, &inter2, &start); timeval_subtract(&d_end, &end, &start); - LOG_INFO("inter: %i.%i, inter2: %i.%i end: %i.%i", d_inter.tv_sec, d_inter.tv_usec, d_inter2.tv_sec, d_inter2.tv_usec, d_end.tv_sec, d_end.tv_usec); + LOG_INFO("inter: %u.%06u, inter2: %u.%06u end: %u.%06u", + (unsigned)d_inter.tv_sec, (unsigned)d_inter.tv_usec, + (unsigned)d_inter2.tv_sec, (unsigned)d_inter2.tv_usec, + (unsigned)d_end.tv_sec, (unsigned)d_end.tv_usec); #endif - ft2232_buffer_size = bytes_read; if (ft2232_expect_read != ft2232_buffer_size) { - LOG_ERROR("ft2232_expect_read (%i) != ft2232_buffer_size (%i) (%i retries)", ft2232_expect_read, ft2232_buffer_size, 100 - timeout); + LOG_ERROR("ft2232_expect_read (%i) != ft2232_buffer_size (%i) (%i retries)", ft2232_expect_read, + ft2232_buffer_size, + 100 - timeout); ft2232_debug_dump_buffer(); exit(-1); @@ -462,7 +638,7 @@ int ft2232_send_and_recv(jtag_command_t *first, jtag_command_t *last) #endif } - ft2232_expect_read = 0; + ft2232_expect_read = 0; ft2232_read_pointer = 0; /* return ERROR_OK, unless a jtag_read_buffer returns a failed check @@ -475,21 +651,23 @@ int ft2232_send_and_recv(jtag_command_t *first, jtag_command_t *last) { switch (cmd->type) { - case JTAG_SCAN: - type = jtag_scan_type(cmd->cmd.scan); - if (type != SCAN_OUT) - { - scan_size = jtag_scan_size(cmd->cmd.scan); - buffer = calloc(CEIL(scan_size, 8), 1); - ft2232_read_scan(type, buffer, scan_size); - if (jtag_read_buffer(buffer, cmd->cmd.scan) != ERROR_OK) - retval = ERROR_JTAG_QUEUE_FAILED; - free(buffer); - } - break; - default: - break; + case JTAG_SCAN: + type = jtag_scan_type(cmd->cmd.scan); + if (type != SCAN_OUT) + { + scan_size = jtag_scan_size(cmd->cmd.scan); + buffer = calloc(CEIL(scan_size, 8), 1); + ft2232_read_scan(type, buffer, scan_size); + if (jtag_read_buffer(buffer, cmd->cmd.scan) != ERROR_OK) + retval = ERROR_JTAG_QUEUE_FAILED; + free(buffer); + } + break; + + default: + break; } + cmd = cmd->next; } @@ -498,73 +676,69 @@ int ft2232_send_and_recv(jtag_command_t *first, jtag_command_t *last) return retval; } -void ft2232_add_pathmove(pathmove_command_t *cmd) -{ - int num_states = cmd->num_states; - u8 tms_byte; - int state_count; - state_count = 0; - while (num_states) - { - int bit_count = 0; +/** + * Function ft2232_add_pathmove + * moves the TAP controller from the current state to a new state through the + * given path, where path is an array of tap_state_t's. + * + * @param path is an array of tap_stat_t which gives the states to traverse through + * ending with the last state at path[num_states-1] + * @param num_states is the count of state steps to move through + */ +static void ft2232_add_pathmove( tap_state_t* path, int num_states ) +{ + int tms_bits = 0; + int state_ndx; + tap_state_t walker = tap_get_state(); - int num_states_batch = num_states > 7 ? 7 : num_states; + assert( (unsigned) num_states <= 32u ); /* tms_bits only holds 32 bits */ - tms_byte = 0x0; - /* command "Clock Data to TMS/CS Pin (no Read)" */ - BUFFER_ADD = 0x4b; - /* number of states remaining */ - BUFFER_ADD = num_states_batch - 1; + /* this loop verifies that the path is legal and logs each state in the path */ + for( state_ndx = 0; state_ndx < num_states; ++state_ndx ) + { + tap_state_t desired_next_state = path[state_ndx]; - while (num_states_batch--) + if (tap_state_transition(walker, false) == desired_next_state ) + ; /* bit within tms_bits at index state_ndx is already zero */ + else if (tap_state_transition(walker, true) == desired_next_state ) + tms_bits |= (1<path[state_count]) - buf_set_u32(&tms_byte, bit_count++, 1, 0x0); - else if (tap_transitions[cur_state].high == cmd->path[state_count]) - buf_set_u32(&tms_byte, bit_count++, 1, 0x1); - else - { - LOG_ERROR("BUG: %s -> %s isn't a valid TAP transition", jtag_state_name(cur_state), jtag_state_name(cmd->path[state_count])); - exit(-1); - } - - cur_state = cmd->path[state_count]; - state_count++; - num_states--; + LOG_ERROR( "BUG: %s -> %s isn't a valid TAP transition", + tap_state_name(walker), tap_state_name(desired_next_state) ); + exit(-1); } - BUFFER_ADD = tms_byte; + walker = desired_next_state; } - end_state = cur_state; + clock_tms( 0x4b, tms_bits, num_states, 0 ); + + tap_set_end_state(tap_get_state()); } -void ft2232_add_scan(int ir_scan, enum scan_type type, u8 *buffer, int scan_size) + +void ft2232_add_scan(bool ir_scan, enum scan_type type, u8* buffer, int scan_size) { int num_bytes = (scan_size + 7) / 8; int bits_left = scan_size; - int cur_byte = 0; + int cur_byte = 0; int last_bit; - if (!((!ir_scan && (cur_state == TAP_DRSHIFT)) || (ir_scan && (cur_state == TAP_IRSHIFT)))) + if ( !ir_scan ) { - /* command "Clock Data to TMS/CS Pin (no Read)" */ - BUFFER_ADD = 0x4b; - /* scan 7 bit */ - BUFFER_ADD = 0x6; - /* TMS data bits */ - if (ir_scan) + if (tap_get_state() != TAP_DRSHIFT) { - BUFFER_ADD = TAP_MOVE(cur_state, TAP_IRSHIFT); - cur_state = TAP_IRSHIFT; + move_to_state( TAP_DRSHIFT ); } - else + } + else + { + if (tap_get_state() != TAP_IRSHIFT) { - BUFFER_ADD = TAP_MOVE(cur_state, TAP_DRSHIFT); - cur_state = TAP_DRSHIFT; + move_to_state( TAP_IRSHIFT ); } - /* LOG_DEBUG("added TMS scan (no read)"); */ } /* add command for complete bytes */ @@ -574,32 +748,34 @@ void ft2232_add_scan(int ir_scan, enum scan_type type, u8 *buffer, int scan_size if (type == SCAN_IO) { /* Clock Data Bytes In and Out LSB First */ - BUFFER_ADD = 0x39; + buffer_write( 0x39 ); /* LOG_DEBUG("added TDI bytes (io %i)", num_bytes); */ } else if (type == SCAN_OUT) { /* Clock Data Bytes Out on -ve Clock Edge LSB First (no Read) */ - BUFFER_ADD = 0x19; + buffer_write( 0x19 ); /* LOG_DEBUG("added TDI bytes (o)"); */ } else if (type == SCAN_IN) { /* Clock Data Bytes In on +ve Clock Edge LSB First (no Write) */ - BUFFER_ADD = 0x28; + buffer_write( 0x28 ); /* LOG_DEBUG("added TDI bytes (i %i)", num_bytes); */ } + thisrun_bytes = (num_bytes > 65537) ? 65536 : (num_bytes - 1); - num_bytes -= thisrun_bytes; - BUFFER_ADD = (thisrun_bytes - 1) & 0xff; - BUFFER_ADD = ((thisrun_bytes - 1) >> 8) & 0xff; + num_bytes -= thisrun_bytes; + + buffer_write( (u8) (thisrun_bytes - 1) ); + buffer_write( (u8) ((thisrun_bytes - 1) >> 8) ); + if (type != SCAN_IN) { /* add complete bytes */ - while(thisrun_bytes-- > 0) + while (thisrun_bytes-- > 0) { - BUFFER_ADD = buffer[cur_byte]; - cur_byte++; + buffer_write( buffer[cur_byte++] ); bits_left -= 8; } } @@ -611,7 +787,7 @@ void ft2232_add_scan(int ir_scan, enum scan_type type, u8 *buffer, int scan_size /* the most signifcant bit is scanned during TAP movement */ if (type != SCAN_IN) - last_bit = (buffer[cur_byte] >> (bits_left - 1)) & 0x1; + last_bit = ( buffer[cur_byte] >> (bits_left - 1) ) & 0x1; else last_bit = 0; @@ -621,79 +797,95 @@ void ft2232_add_scan(int ir_scan, enum scan_type type, u8 *buffer, int scan_size if (type == SCAN_IO) { /* Clock Data Bits In and Out LSB First */ - BUFFER_ADD = 0x3b; + buffer_write( 0x3b ); /* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */ } else if (type == SCAN_OUT) { /* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */ - BUFFER_ADD = 0x1b; + buffer_write( 0x1b ); /* LOG_DEBUG("added TDI bits (o)"); */ } else if (type == SCAN_IN) { /* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */ - BUFFER_ADD = 0x2a; + buffer_write( 0x2a ); /* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */ } - BUFFER_ADD = bits_left - 2; + + buffer_write( bits_left - 2 ); if (type != SCAN_IN) - BUFFER_ADD = buffer[cur_byte]; + buffer_write( buffer[cur_byte] ); } - if ((ir_scan && (end_state == TAP_IRSHIFT)) || - (!ir_scan && (end_state == TAP_DRSHIFT))) + if ( ( ir_scan && (tap_get_end_state() == TAP_IRSHIFT) ) + || ( !ir_scan && (tap_get_end_state() == TAP_DRSHIFT) ) ) { if (type == SCAN_IO) { /* Clock Data Bits In and Out LSB First */ - BUFFER_ADD = 0x3b; + buffer_write( 0x3b ); /* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */ } else if (type == SCAN_OUT) { /* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */ - BUFFER_ADD = 0x1b; + buffer_write( 0x1b ); /* LOG_DEBUG("added TDI bits (o)"); */ } else if (type == SCAN_IN) { /* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */ - BUFFER_ADD = 0x2a; + buffer_write( 0x2a ); /* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */ } - BUFFER_ADD = 0x0; - BUFFER_ADD = last_bit; + buffer_write( 0x0 ); + buffer_write( last_bit ); } else { + int tms_bits; + int tms_count; + u8 mpsse_cmd; + /* move from Shift-IR/DR to end state */ if (type != SCAN_OUT) { + /* We always go to the PAUSE state in two step at the end of an IN or IO scan */ + /* This must be coordinated with the bit shifts in ft2232_read_scan */ + tms_bits = 0x01; + tms_count = 2; /* Clock Data to TMS/CS Pin with Read */ - BUFFER_ADD = 0x6b; + mpsse_cmd = 0x6b; /* LOG_DEBUG("added TMS scan (read)"); */ } else { + tms_bits = tap_get_tms_path( tap_get_state(), tap_get_end_state() ); + tms_count = tap_get_tms_path_len( tap_get_state(), tap_get_end_state() ); /* Clock Data to TMS/CS Pin (no Read) */ - BUFFER_ADD = 0x4b; + mpsse_cmd = 0x4b; /* LOG_DEBUG("added TMS scan (no read)"); */ } - BUFFER_ADD = 0x6; - BUFFER_ADD = TAP_MOVE(cur_state, end_state) | (last_bit << 7); - cur_state = end_state; + + clock_tms( mpsse_cmd, tms_bits, tms_count, last_bit ); + } + + if (tap_get_state() != tap_get_end_state()) + { + move_to_state( tap_get_end_state() ); } } -int ft2232_large_scan(scan_command_t *cmd, enum scan_type type, u8 *buffer, int scan_size) + +static int ft2232_large_scan(scan_command_t* cmd, enum scan_type type, u8* buffer, int scan_size) { int num_bytes = (scan_size + 7) / 8; int bits_left = scan_size; - int cur_byte = 0; + int cur_byte = 0; int last_bit; - u8 *receive_buffer = malloc(CEIL(scan_size, 8)); - u8 *receive_pointer = receive_buffer; + u8* receive_buffer = malloc( CEIL(scan_size, 8) ); + u8* receive_pointer = receive_buffer; u32 bytes_written; u32 bytes_read; int retval; @@ -705,18 +897,12 @@ int ft2232_large_scan(scan_command_t *cmd, enum scan_type type, u8 *buffer, int exit(-1); } - if (cur_state != TAP_DRSHIFT) + if (tap_get_state() != TAP_DRSHIFT) { - /* command "Clock Data to TMS/CS Pin (no Read)" */ - BUFFER_ADD = 0x4b; - /* scan 7 bit */ - BUFFER_ADD = 0x6; - /* TMS data bits */ - BUFFER_ADD = TAP_MOVE(cur_state, TAP_DRSHIFT); - cur_state = TAP_DRSHIFT; + move_to_state( TAP_DRSHIFT ); } - if ((retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written)) != ERROR_OK) + if ( ( retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written) ) != ERROR_OK ) { LOG_ERROR("couldn't write MPSSE commands to FT2232"); exit(-1); @@ -732,32 +918,34 @@ int ft2232_large_scan(scan_command_t *cmd, enum scan_type type, u8 *buffer, int if (type == SCAN_IO) { /* Clock Data Bytes In and Out LSB First */ - BUFFER_ADD = 0x39; + buffer_write( 0x39 ); /* LOG_DEBUG("added TDI bytes (io %i)", num_bytes); */ } else if (type == SCAN_OUT) { /* Clock Data Bytes Out on -ve Clock Edge LSB First (no Read) */ - BUFFER_ADD = 0x19; + buffer_write( 0x19 ); /* LOG_DEBUG("added TDI bytes (o)"); */ } else if (type == SCAN_IN) { /* Clock Data Bytes In on +ve Clock Edge LSB First (no Write) */ - BUFFER_ADD = 0x28; + buffer_write( 0x28 ); /* LOG_DEBUG("added TDI bytes (i %i)", num_bytes); */ } + thisrun_bytes = (num_bytes > 65537) ? 65536 : (num_bytes - 1); - thisrun_read = thisrun_bytes; - num_bytes -= thisrun_bytes; - BUFFER_ADD = (thisrun_bytes - 1) & 0xff; - BUFFER_ADD = ((thisrun_bytes - 1) >> 8) & 0xff; + thisrun_read = thisrun_bytes; + num_bytes -= thisrun_bytes; + buffer_write( (u8) (thisrun_bytes - 1) ); + buffer_write( (u8) ( (thisrun_bytes - 1) >> 8 )); + if (type != SCAN_IN) { /* add complete bytes */ - while(thisrun_bytes-- > 0) + while (thisrun_bytes-- > 0) { - BUFFER_ADD = buffer[cur_byte]; + buffer_write( buffer[cur_byte] ); cur_byte++; bits_left -= 8; } @@ -767,7 +955,7 @@ int ft2232_large_scan(scan_command_t *cmd, enum scan_type type, u8 *buffer, int bits_left -= 8 * (thisrun_bytes); } - if ((retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written)) != ERROR_OK) + if ( ( retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written) ) != ERROR_OK ) { LOG_ERROR("couldn't write MPSSE commands to FT2232"); exit(-1); @@ -777,7 +965,7 @@ int ft2232_large_scan(scan_command_t *cmd, enum scan_type type, u8 *buffer, int if (type != SCAN_OUT) { - if ((retval = ft2232_read(receive_pointer, thisrun_read, &bytes_read)) != ERROR_OK) + if ( ( retval = ft2232_read(receive_pointer, thisrun_read, &bytes_read) ) != ERROR_OK ) { LOG_ERROR("couldn't read from FT2232"); exit(-1); @@ -791,7 +979,7 @@ int ft2232_large_scan(scan_command_t *cmd, enum scan_type type, u8 *buffer, int /* the most signifcant bit is scanned during TAP movement */ if (type != SCAN_IN) - last_bit = (buffer[cur_byte] >> (bits_left - 1)) & 0x1; + last_bit = ( buffer[cur_byte] >> (bits_left - 1) ) & 0x1; else last_bit = 0; @@ -801,76 +989,79 @@ int ft2232_large_scan(scan_command_t *cmd, enum scan_type type, u8 *buffer, int if (type == SCAN_IO) { /* Clock Data Bits In and Out LSB First */ - BUFFER_ADD = 0x3b; + buffer_write( 0x3b ); /* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */ } else if (type == SCAN_OUT) { /* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */ - BUFFER_ADD = 0x1b; + buffer_write( 0x1b ); /* LOG_DEBUG("added TDI bits (o)"); */ } else if (type == SCAN_IN) { /* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */ - BUFFER_ADD = 0x2a; + buffer_write( 0x2a ); /* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */ } - BUFFER_ADD = bits_left - 2; + buffer_write( bits_left - 2 ); if (type != SCAN_IN) - BUFFER_ADD = buffer[cur_byte]; + buffer_write( buffer[cur_byte] ); if (type != SCAN_OUT) thisrun_read += 2; } - if (end_state == TAP_DRSHIFT) + if (tap_get_end_state() == TAP_DRSHIFT) { if (type == SCAN_IO) { /* Clock Data Bits In and Out LSB First */ - BUFFER_ADD = 0x3b; + buffer_write( 0x3b ); /* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */ } else if (type == SCAN_OUT) { /* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */ - BUFFER_ADD = 0x1b; + buffer_write( 0x1b ); /* LOG_DEBUG("added TDI bits (o)"); */ } else if (type == SCAN_IN) { /* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */ - BUFFER_ADD = 0x2a; + buffer_write( 0x2a ); /* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */ } - BUFFER_ADD = 0x0; - BUFFER_ADD = last_bit; + buffer_write( 0x0 ); + buffer_write( last_bit ); } else { + int tms_bits = tap_get_tms_path( tap_get_state(), tap_get_end_state() ); + int tms_count = tap_get_tms_path_len( tap_get_state(), tap_get_end_state() ); + u8 mpsse_cmd; + /* move from Shift-IR/DR to end state */ if (type != SCAN_OUT) { /* Clock Data to TMS/CS Pin with Read */ - BUFFER_ADD = 0x6b; + mpsse_cmd = 0x6b; /* LOG_DEBUG("added TMS scan (read)"); */ } else { /* Clock Data to TMS/CS Pin (no Read) */ - BUFFER_ADD = 0x4b; + mpsse_cmd = 0x4b; /* LOG_DEBUG("added TMS scan (no read)"); */ } - BUFFER_ADD = 0x6; - BUFFER_ADD = TAP_MOVE(cur_state, end_state) | (last_bit << 7); - cur_state = end_state; + + clock_tms( mpsse_cmd, tms_bits, tms_count, last_bit ); } if (type != SCAN_OUT) thisrun_read += 1; - if ((retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written)) != ERROR_OK) + if ( ( retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written) ) != ERROR_OK ) { LOG_ERROR("couldn't write MPSSE commands to FT2232"); exit(-1); @@ -880,7 +1071,7 @@ int ft2232_large_scan(scan_command_t *cmd, enum scan_type type, u8 *buffer, int if (type != SCAN_OUT) { - if ((retval = ft2232_read(receive_pointer, thisrun_read, &bytes_read)) != ERROR_OK) + if ( ( retval = ft2232_read(receive_pointer, thisrun_read, &bytes_read) ) != ERROR_OK ) { LOG_ERROR("couldn't read from FT2232"); exit(-1); @@ -892,33 +1083,37 @@ int ft2232_large_scan(scan_command_t *cmd, enum scan_type type, u8 *buffer, int return ERROR_OK; } -int ft2232_predict_scan_out(int scan_size, enum scan_type type) + +static int ft2232_predict_scan_out(int scan_size, enum scan_type type) { int predicted_size = 3; int num_bytes = (scan_size - 1) / 8; - if (cur_state != TAP_DRSHIFT) - predicted_size += 3; + if (tap_get_state() != TAP_DRSHIFT) + predicted_size += get_tms_buffer_requirements( tap_get_tms_path_len( tap_get_state(), TAP_DRSHIFT) ); - if (type == SCAN_IN) /* only from device to host */ + if (type == SCAN_IN) /* only from device to host */ { /* complete bytes */ - predicted_size += (CEIL(num_bytes, 65536)) * 3; + predicted_size += CEIL(num_bytes, 65536) * 3; + /* remaining bits - 1 (up to 7) */ - predicted_size += ((scan_size - 1) % 8) ? 2 : 0; + predicted_size += ( (scan_size - 1) % 8 ) ? 2 : 0; } - else /* host to device, or bidirectional */ + else /* host to device, or bidirectional */ { /* complete bytes */ - predicted_size += num_bytes + (CEIL(num_bytes, 65536)) * 3; + predicted_size += num_bytes + CEIL(num_bytes, 65536) * 3; + /* remaining bits -1 (up to 7) */ - predicted_size += ((scan_size - 1) % 8) ? 3 : 0; + predicted_size += ( (scan_size - 1) % 8 ) ? 3 : 0; } return predicted_size; } -int ft2232_predict_scan_in(int scan_size, enum scan_type type) + +static int ft2232_predict_scan_in(int scan_size, enum scan_type type) { int predicted_size = 0; @@ -926,8 +1121,10 @@ int ft2232_predict_scan_in(int scan_size, enum scan_type type) { /* complete bytes */ predicted_size += (CEIL(scan_size, 8) > 1) ? (CEIL(scan_size, 8) - 1) : 0; + /* remaining bits - 1 */ - predicted_size += ((scan_size - 1) % 8) ? 1 : 0; + predicted_size += ( (scan_size - 1) % 8 ) ? 1 : 0; + /* last bit (from TMS scan) */ predicted_size += 1; } @@ -937,46 +1134,47 @@ int ft2232_predict_scan_in(int scan_size, enum scan_type type) return predicted_size; } -void usbjtag_reset(int trst, int srst) + +static void usbjtag_reset(int trst, int srst) { if (trst == 1) { if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) - low_direction |= nTRSTnOE; /* switch to output pin (output is low) */ + low_direction |= nTRSTnOE; /* switch to output pin (output is low) */ else - low_output &= ~nTRST; /* switch output low */ + low_output &= ~nTRST; /* switch output low */ } else if (trst == 0) { if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) low_direction &= ~nTRSTnOE; /* switch to input pin (high-Z + internal and external pullup) */ else - low_output |= nTRST; /* switch output high */ + low_output |= nTRST; /* switch output high */ } if (srst == 1) { if (jtag_reset_config & RESET_SRST_PUSH_PULL) - low_output &= ~nSRST; /* switch output low */ + low_output &= ~nSRST; /* switch output low */ else - low_direction |= nSRSTnOE; /* switch to output pin (output is low) */ + low_direction |= nSRSTnOE; /* switch to output pin (output is low) */ } else if (srst == 0) { if (jtag_reset_config & RESET_SRST_PUSH_PULL) - low_output |= nSRST; /* switch output high */ + low_output |= nSRST; /* switch output high */ else - low_direction &= ~nSRSTnOE; /* switch to input pin (high-Z) */ + low_direction &= ~nSRSTnOE; /* switch to input pin (high-Z) */ } /* command "set data bits low byte" */ - BUFFER_ADD = 0x80; - BUFFER_ADD = low_output; - BUFFER_ADD = low_direction; - + buffer_write( 0x80 ); + buffer_write( low_output ); + buffer_write( low_direction ); } -void jtagkey_reset(int trst, int srst) + +static void jtagkey_reset(int trst, int srst) { if (trst == 1) { @@ -1009,13 +1207,15 @@ void jtagkey_reset(int trst, int srst) } /* command "set data bits high byte" */ - BUFFER_ADD = 0x82; - BUFFER_ADD = high_output; - BUFFER_ADD = high_direction; - LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, high_direction); + buffer_write( 0x82 ); + buffer_write( high_output ); + buffer_write( high_direction ); + LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, + high_direction); } -void olimex_jtag_reset(int trst, int srst) + +static void olimex_jtag_reset(int trst, int srst) { if (trst == 1) { @@ -1042,17 +1242,19 @@ void olimex_jtag_reset(int trst, int srst) } /* command "set data bits high byte" */ - BUFFER_ADD = 0x82; - BUFFER_ADD = high_output; - BUFFER_ADD = high_direction; - LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, high_direction); + buffer_write( 0x82 ); + buffer_write( high_output ); + buffer_write( high_direction ); + LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, + high_direction); } -void axm0432_jtag_reset(int trst, int srst) + +static void axm0432_jtag_reset(int trst, int srst) { if (trst == 1) { - cur_state = TAP_RESET; + tap_set_state(TAP_RESET); high_output &= ~nTRST; } else if (trst == 0) @@ -1070,13 +1272,15 @@ void axm0432_jtag_reset(int trst, int srst) } /* command "set data bits low byte" */ - BUFFER_ADD = 0x82; - BUFFER_ADD = high_output; - BUFFER_ADD = high_direction; - LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, high_direction); + buffer_write( 0x82 ); + buffer_write( high_output ); + buffer_write( high_direction ); + LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, + high_direction); } -void flyswatter_reset(int trst, int srst) + +static void flyswatter_reset(int trst, int srst) { if (trst == 1) { @@ -1097,13 +1301,14 @@ void flyswatter_reset(int trst, int srst) } /* command "set data bits low byte" */ - BUFFER_ADD = 0x80; - BUFFER_ADD = low_output; - BUFFER_ADD = low_direction; + buffer_write( 0x80 ); + buffer_write( low_output ); + buffer_write( low_direction ); LOG_DEBUG("trst: %i, srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x", trst, srst, low_output, low_direction); } -void turtle_reset(int trst, int srst) + +static void turtle_reset(int trst, int srst) { trst = trst; @@ -1117,13 +1322,14 @@ void turtle_reset(int trst, int srst) } /* command "set data bits low byte" */ - BUFFER_ADD = 0x80; - BUFFER_ADD = low_output; - BUFFER_ADD = low_direction; + buffer_write( 0x80 ); + buffer_write( low_output ); + buffer_write( low_direction ); LOG_DEBUG("srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x", srst, low_output, low_direction); } -void comstick_reset(int trst, int srst) + +static void comstick_reset(int trst, int srst) { if (trst == 1) { @@ -1144,13 +1350,15 @@ void comstick_reset(int trst, int srst) } /* command "set data bits high byte" */ - BUFFER_ADD = 0x82; - BUFFER_ADD = high_output; - BUFFER_ADD = high_direction; - LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, high_direction); + buffer_write( 0x82 ); + buffer_write( high_output ); + buffer_write( high_direction ); + LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, + high_direction); } -void stm32stick_reset(int trst, int srst) + +static void stm32stick_reset(int trst, int srst) { if (trst == 1) { @@ -1171,269 +1379,399 @@ void stm32stick_reset(int trst, int srst) } /* command "set data bits low byte" */ - BUFFER_ADD = 0x80; - BUFFER_ADD = low_output; - BUFFER_ADD = low_direction; + buffer_write( 0x80 ); + buffer_write( low_output ); + buffer_write( low_direction ); + + /* command "set data bits high byte" */ + buffer_write( 0x82 ); + buffer_write( high_output ); + buffer_write( high_direction ); + LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, + high_direction); +} + + + +static void sheevaplug_reset(int trst, int srst) +{ + if (trst == 1) + high_output &= ~nTRST; + else if (trst == 0) + high_output |= nTRST; + + if (srst == 1) + high_output &= ~nSRSTnOE; + else if (srst == 0) + high_output |= nSRSTnOE; /* command "set data bits high byte" */ - BUFFER_ADD = 0x82; - BUFFER_ADD = high_output; - BUFFER_ADD = high_direction; + buffer_write( 0x82 ); + buffer_write( high_output ); + buffer_write( high_direction ); LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, high_direction); } -int ft2232_execute_queue() +static int ft2232_execute_end_state(jtag_command_t *cmd) { - jtag_command_t *cmd = jtag_command_queue; /* currently processed command */ - jtag_command_t *first_unsent = cmd; /* next command that has to be sent */ - u8 *buffer; - int scan_size; /* size of IR or DR scan */ - enum scan_type type; - int i; - int predicted_size = 0; - int require_send = 0; - int retval; + int retval; + retval = ERROR_OK; - /* return ERROR_OK, unless ft2232_send_and_recv reports a failed check - * that wasn't handled by a caller-provided error handler - */ + DEBUG_JTAG_IO("execute_end_state: %s", tap_state_name(cmd->cmd.end_state->end_state) ); + + if (cmd->cmd.end_state->end_state != TAP_INVALID) + ft2232_end_state(cmd->cmd.end_state->end_state); + + return retval; +} + + +static int ft2232_execute_runtest(jtag_command_t *cmd) +{ + int retval; + int i; + int predicted_size = 0; retval = ERROR_OK; - ft2232_buffer_size = 0; - ft2232_expect_read = 0; + DEBUG_JTAG_IO("runtest %i cycles, end in %s", + cmd->cmd.runtest->num_cycles, + tap_state_name(cmd->cmd.runtest->end_state)); - /* blink, if the current layout has that feature */ - if (layout->blink) - layout->blink(); + /* only send the maximum buffer size that FT2232C can handle */ + predicted_size = 0; + if (tap_get_state() != TAP_IDLE) + predicted_size += 3; + predicted_size += 3 * CEIL(cmd->cmd.runtest->num_cycles, 7); + if ( (cmd->cmd.runtest->end_state != TAP_INVALID) && (cmd->cmd.runtest->end_state != TAP_IDLE) ) + predicted_size += 3; + if ( (cmd->cmd.runtest->end_state == TAP_INVALID) && (tap_get_end_state() != TAP_IDLE) ) + predicted_size += 3; + if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE) + { + if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK) + retval = ERROR_JTAG_QUEUE_FAILED; + require_send = 0; + first_unsent = cmd; + } + if (tap_get_state() != TAP_IDLE) + { + move_to_state( TAP_IDLE ); + require_send = 1; + } + i = cmd->cmd.runtest->num_cycles; + while (i > 0) + { + /* there are no state transitions in this code, so omit state tracking */ - while (cmd) + /* command "Clock Data to TMS/CS Pin (no Read)" */ + buffer_write( 0x4b ); + + /* scan 7 bits */ + buffer_write( (i > 7) ? 6 : (i - 1) ); + + /* TMS data bits */ + buffer_write( 0x0 ); + tap_set_state(TAP_IDLE); + + i -= (i > 7) ? 7 : i; + /* LOG_DEBUG("added TMS scan (no read)"); */ + } + + if (cmd->cmd.runtest->end_state != TAP_INVALID) + ft2232_end_state(cmd->cmd.runtest->end_state); + + if ( tap_get_state() != tap_get_end_state() ) { - switch(cmd->type) - { - case JTAG_END_STATE: - if (cmd->cmd.end_state->end_state != -1) - ft2232_end_state(cmd->cmd.end_state->end_state); - break; - case JTAG_RESET: - /* only send the maximum buffer size that FT2232C can handle */ - predicted_size = 3; - if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE) - { - if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK) - retval = ERROR_JTAG_QUEUE_FAILED; - require_send = 0; - first_unsent = cmd; - } - - if ((cmd->cmd.reset->trst == 1) || (cmd->cmd.reset->srst && (jtag_reset_config & RESET_SRST_PULLS_TRST))) - { - cur_state = TAP_RESET; - } - layout->reset(cmd->cmd.reset->trst, cmd->cmd.reset->srst); - require_send = 1; + move_to_state( tap_get_end_state() ); + } + require_send = 1; #ifdef _DEBUG_JTAG_IO_ - LOG_DEBUG("trst: %i, srst: %i", cmd->cmd.reset->trst, cmd->cmd.reset->srst); -#endif - break; - case JTAG_RUNTEST: - /* only send the maximum buffer size that FT2232C can handle */ - predicted_size = 0; - if (cur_state != TAP_IDLE) - predicted_size += 3; - predicted_size += 3 * CEIL(cmd->cmd.runtest->num_cycles, 7); - if ((cmd->cmd.runtest->end_state != -1) && (cmd->cmd.runtest->end_state != TAP_IDLE)) - predicted_size += 3; - if ((cmd->cmd.runtest->end_state == -1) && (end_state != TAP_IDLE)) - predicted_size += 3; - if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE) - { - if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK) - retval = ERROR_JTAG_QUEUE_FAILED; - require_send = 0; - first_unsent = cmd; - } - if (cur_state != TAP_IDLE) - { - /* command "Clock Data to TMS/CS Pin (no Read)" */ - BUFFER_ADD = 0x4b; - /* scan 7 bit */ - BUFFER_ADD = 0x6; - /* TMS data bits */ - BUFFER_ADD = TAP_MOVE(cur_state, TAP_IDLE); - cur_state = TAP_IDLE; - require_send = 1; - } - i = cmd->cmd.runtest->num_cycles; - while (i > 0) - { - /* command "Clock Data to TMS/CS Pin (no Read)" */ - BUFFER_ADD = 0x4b; - /* scan 7 bit */ - BUFFER_ADD = (i > 7) ? 6 : (i - 1); - /* TMS data bits */ - BUFFER_ADD = 0x0; - cur_state = TAP_IDLE; - i -= (i > 7) ? 7 : i; - /* LOG_DEBUG("added TMS scan (no read)"); */ - } - if (cmd->cmd.runtest->end_state != -1) - ft2232_end_state(cmd->cmd.runtest->end_state); - if (cur_state != end_state) - { - /* command "Clock Data to TMS/CS Pin (no Read)" */ - BUFFER_ADD = 0x4b; - /* scan 7 bit */ - BUFFER_ADD = 0x6; - /* TMS data bits */ - BUFFER_ADD = TAP_MOVE(cur_state, end_state); - cur_state = end_state; - /* LOG_DEBUG("added TMS scan (no read)"); */ - } - require_send = 1; -#ifdef _DEBUG_JTAG_IO_ - LOG_DEBUG("runtest: %i, end in %i", cmd->cmd.runtest->num_cycles, end_state); -#endif - break; - case JTAG_STATEMOVE: - /* only send the maximum buffer size that FT2232C can handle */ - predicted_size = 3; - if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE) - { - if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK) - retval = ERROR_JTAG_QUEUE_FAILED; - require_send = 0; - first_unsent = cmd; - } - if (cmd->cmd.statemove->end_state != -1) - ft2232_end_state(cmd->cmd.statemove->end_state); - /* command "Clock Data to TMS/CS Pin (no Read)" */ - BUFFER_ADD = 0x4b; - /* scan 7 bit */ - BUFFER_ADD = 0x6; - /* TMS data bits */ - BUFFER_ADD = TAP_MOVE(cur_state, end_state); - /* LOG_DEBUG("added TMS scan (no read)"); */ - cur_state = end_state; - require_send = 1; -#ifdef _DEBUG_JTAG_IO_ - LOG_DEBUG("statemove: %i", end_state); -#endif - break; - case JTAG_PATHMOVE: - /* only send the maximum buffer size that FT2232C can handle */ - predicted_size = 3 * CEIL(cmd->cmd.pathmove->num_states, 7); - if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE) - { - if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK) - retval = ERROR_JTAG_QUEUE_FAILED; - require_send = 0; - first_unsent = cmd; - } - ft2232_add_pathmove(cmd->cmd.pathmove); - require_send = 1; -#ifdef _DEBUG_JTAG_IO_ - LOG_DEBUG("pathmove: %i states, end in %i", cmd->cmd.pathmove->num_states, cmd->cmd.pathmove->path[cmd->cmd.pathmove->num_states - 1]); -#endif - break; - case JTAG_SCAN: - scan_size = jtag_build_buffer(cmd->cmd.scan, &buffer); - type = jtag_scan_type(cmd->cmd.scan); - predicted_size = ft2232_predict_scan_out(scan_size, type); - if ((predicted_size + 1) > FT2232_BUFFER_SIZE) - { - LOG_DEBUG("oversized ft2232 scan (predicted_size > FT2232_BUFFER_SIZE)"); - /* unsent commands before this */ - if (first_unsent != cmd) - if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK) - retval = ERROR_JTAG_QUEUE_FAILED; - - /* current command */ - if (cmd->cmd.scan->end_state != -1) - ft2232_end_state(cmd->cmd.scan->end_state); - ft2232_large_scan(cmd->cmd.scan, type, buffer, scan_size); - require_send = 0; - first_unsent = cmd->next; - if (buffer) - free(buffer); - break; - } - else if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE) - { - LOG_DEBUG("ft2232 buffer size reached, sending queued commands (first_unsent: %p, cmd: %p)", first_unsent, cmd); - if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK) - retval = ERROR_JTAG_QUEUE_FAILED; - require_send = 0; - first_unsent = cmd; - } - ft2232_expect_read += ft2232_predict_scan_in(scan_size, type); - /* LOG_DEBUG("new read size: %i", ft2232_expect_read); */ - if (cmd->cmd.scan->end_state != -1) - ft2232_end_state(cmd->cmd.scan->end_state); - ft2232_add_scan(cmd->cmd.scan->ir_scan, type, buffer, scan_size); - require_send = 1; - if (buffer) - free(buffer); -#ifdef _DEBUG_JTAG_IO_ - LOG_DEBUG("%s scan, %i bit, end in %i", (cmd->cmd.scan->ir_scan) ? "IR" : "DR", scan_size, end_state); -#endif - break; - case JTAG_SLEEP: - if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK) - retval = ERROR_JTAG_QUEUE_FAILED; - first_unsent = cmd->next; - jtag_sleep(cmd->cmd.sleep->us); -#ifdef _DEBUG_JTAG_IO_ - LOG_DEBUG("sleep %i usec", cmd->cmd.sleep->us); + LOG_DEBUG( "runtest: %i, end in %s", cmd->cmd.runtest->num_cycles, tap_state_name( tap_get_end_state() ) ); #endif - break; - default: - LOG_ERROR("BUG: unknown JTAG command type encountered"); - exit(-1); - } - cmd = cmd->next; - } - - if (require_send > 0) - if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK) - retval = ERROR_JTAG_QUEUE_FAILED; return retval; } -#if BUILD_FT2232_FTD2XX == 1 -static int ft2232_init_ftd2xx(u16 vid, u16 pid, int more, int *try_more) + +static int ft2232_execute_statemove(jtag_command_t *cmd) { - FT_STATUS status; - DWORD openex_flags = 0; - char *openex_string = NULL; - u8 latency_timer; + int predicted_size = 0; + int retval = ERROR_OK; - LOG_DEBUG("'ft2232' interface using FTD2XX with '%s' layout (%4.4x:%4.4x)",ft2232_layout, vid, pid); + DEBUG_JTAG_IO("statemove end in %i", cmd->cmd.statemove->end_state); -#if IS_WIN32 == 0 - /* Add non-standard Vid/Pid to the linux driver */ - if ((status = FT_SetVIDPID(vid, pid)) != FT_OK) + /* only send the maximum buffer size that FT2232C can handle */ + predicted_size = 3; + if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE) { - LOG_WARNING("couldn't add %4.4x:%4.4x", vid, pid); + if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK) + retval = ERROR_JTAG_QUEUE_FAILED; + require_send = 0; + first_unsent = cmd; } -#endif + if (cmd->cmd.statemove->end_state != TAP_INVALID) + ft2232_end_state(cmd->cmd.statemove->end_state); - if (ft2232_device_desc && ft2232_serial) + /* move to end state */ + if ( tap_get_state() != tap_get_end_state() ) { - LOG_WARNING("can't open by device description and serial number, giving precedence to serial"); - ft2232_device_desc = NULL; + move_to_state( tap_get_end_state() ); + require_send = 1; } - if (ft2232_device_desc) + return retval; +} + +static int ft2232_execute_pathmove(jtag_command_t *cmd) +{ + int predicted_size = 0; + int retval = ERROR_OK; + + tap_state_t* path = cmd->cmd.pathmove->path; + int num_states = cmd->cmd.pathmove->num_states; + + DEBUG_JTAG_IO("pathmove: %i states, current: %s end: %s", num_states, + tap_state_name( tap_get_state() ), + tap_state_name( path[num_states-1] ) + ); + + /* only send the maximum buffer size that FT2232C can handle */ + predicted_size = 3 * CEIL(num_states, 7); + if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE) { - openex_string = ft2232_device_desc; - openex_flags = FT_OPEN_BY_DESCRIPTION; + if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK) + retval = ERROR_JTAG_QUEUE_FAILED; + + require_send = 0; + first_unsent = cmd; + } + + ft2232_add_pathmove( path, num_states ); + require_send = 1; + + return retval; +} + + +static int ft2232_execute_scan(jtag_command_t *cmd) +{ + u8* buffer; + int scan_size; /* size of IR or DR scan */ + int predicted_size = 0; + int retval = ERROR_OK; + + enum scan_type type = jtag_scan_type(cmd->cmd.scan); + + DEBUG_JTAG_IO( "%s type:%d", cmd->cmd.scan->ir_scan ? "IRSCAN" : "DRSCAN", type ); + + scan_size = jtag_build_buffer(cmd->cmd.scan, &buffer); + + predicted_size = ft2232_predict_scan_out(scan_size, type); + if ( (predicted_size + 1) > FT2232_BUFFER_SIZE ) + { + LOG_DEBUG("oversized ft2232 scan (predicted_size > FT2232_BUFFER_SIZE)"); + /* unsent commands before this */ + if (first_unsent != cmd) + if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK) + retval = ERROR_JTAG_QUEUE_FAILED; + + /* current command */ + if (cmd->cmd.scan->end_state != TAP_INVALID) + ft2232_end_state(cmd->cmd.scan->end_state); + ft2232_large_scan(cmd->cmd.scan, type, buffer, scan_size); + require_send = 0; + first_unsent = cmd->next; + if (buffer) + free(buffer); + return retval; + } + else if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE) + { + LOG_DEBUG("ft2232 buffer size reached, sending queued commands (first_unsent: %p, cmd: %p)", + first_unsent, + cmd); + if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK) + retval = ERROR_JTAG_QUEUE_FAILED; + require_send = 0; + first_unsent = cmd; + } + ft2232_expect_read += ft2232_predict_scan_in(scan_size, type); + /* LOG_DEBUG("new read size: %i", ft2232_expect_read); */ + if (cmd->cmd.scan->end_state != TAP_INVALID) + ft2232_end_state(cmd->cmd.scan->end_state); + ft2232_add_scan(cmd->cmd.scan->ir_scan, type, buffer, scan_size); + require_send = 1; + if (buffer) + free(buffer); +#ifdef _DEBUG_JTAG_IO_ + LOG_DEBUG( "%s scan, %i bits, end in %s", (cmd->cmd.scan->ir_scan) ? "IR" : "DR", scan_size, + tap_state_name( tap_get_end_state() ) ); +#endif + return retval; + +} + +static int ft2232_execute_reset(jtag_command_t *cmd) +{ + int retval; + int predicted_size = 0; + retval = ERROR_OK; + + DEBUG_JTAG_IO("reset trst: %i srst %i", + cmd->cmd.reset->trst, cmd->cmd.reset->srst); + + /* only send the maximum buffer size that FT2232C can handle */ + predicted_size = 3; + if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE) + { + if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK) + retval = ERROR_JTAG_QUEUE_FAILED; + require_send = 0; + first_unsent = cmd; + } + + layout->reset(cmd->cmd.reset->trst, cmd->cmd.reset->srst); + require_send = 1; + +#ifdef _DEBUG_JTAG_IO_ + LOG_DEBUG("trst: %i, srst: %i", cmd->cmd.reset->trst, cmd->cmd.reset->srst); +#endif + return retval; +} + +static int ft2232_execute_sleep(jtag_command_t *cmd) +{ + int retval; + retval = ERROR_OK; + + DEBUG_JTAG_IO("sleep %i", cmd->cmd.sleep->us); + + if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK) + retval = ERROR_JTAG_QUEUE_FAILED; + first_unsent = cmd->next; + jtag_sleep(cmd->cmd.sleep->us); +#ifdef _DEBUG_JTAG_IO_ + LOG_DEBUG( "sleep %i usec while in %s", cmd->cmd.sleep->us, tap_state_name( tap_get_state() ) ); +#endif + + return retval; +} + +static int ft2232_execute_stableclocks(jtag_command_t *cmd) +{ + int retval; + retval = ERROR_OK; + + /* this is only allowed while in a stable state. A check for a stable + * state was done in jtag_add_clocks() + */ + if (ft2232_stableclocks(cmd->cmd.stableclocks->num_cycles, cmd) != ERROR_OK) + retval = ERROR_JTAG_QUEUE_FAILED; +#ifdef _DEBUG_JTAG_IO_ + LOG_DEBUG( "clocks %i while in %s", cmd->cmd.stableclocks->num_cycles, tap_state_name( tap_get_state() ) ); +#endif + + return retval; +} + +static int ft2232_execute_command(jtag_command_t *cmd) +{ + int retval; + retval = ERROR_OK; + + switch (cmd->type) + { + case JTAG_END_STATE: retval = ft2232_execute_end_state(cmd); break; + case JTAG_RESET: retval = ft2232_execute_reset(cmd); break; + case JTAG_RUNTEST: retval = ft2232_execute_runtest(cmd); break; + case JTAG_STATEMOVE: retval = ft2232_execute_statemove(cmd); break; + case JTAG_PATHMOVE: retval = ft2232_execute_pathmove(cmd); break; + case JTAG_SCAN: retval = ft2232_execute_scan(cmd); break; + case JTAG_SLEEP: retval = ft2232_execute_sleep(cmd); break; + case JTAG_STABLECLOCKS: retval = ft2232_execute_stableclocks(cmd); break; + default: + LOG_ERROR("BUG: unknown JTAG command type encountered"); + exit(-1); + } + return retval; +} + +static int ft2232_execute_queue() +{ + jtag_command_t* cmd = jtag_command_queue; /* currently processed command */ + int retval; + + first_unsent = cmd; /* next command that has to be sent */ + require_send = 0; + + /* return ERROR_OK, unless ft2232_send_and_recv reports a failed check + * that wasn't handled by a caller-provided error handler + */ + retval = ERROR_OK; + + ft2232_buffer_size = 0; + ft2232_expect_read = 0; + + /* blink, if the current layout has that feature */ + if (layout->blink) + layout->blink(); + + while (cmd) + { + if (ft2232_execute_command(cmd) != ERROR_OK) + retval = ERROR_JTAG_QUEUE_FAILED; + /* Start reading input before FT2232 TX buffer fills up */ + cmd = cmd->next; + if (ft2232_expect_read > 256) + { + if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK) + retval = ERROR_JTAG_QUEUE_FAILED; + first_unsent = cmd; + } + } + + if (require_send > 0) + if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK) + retval = ERROR_JTAG_QUEUE_FAILED; + + return retval; +} + + +#if BUILD_FT2232_FTD2XX == 1 +static int ft2232_init_ftd2xx(u16 vid, u16 pid, int more, int* try_more) +{ + FT_STATUS status; + DWORD openex_flags = 0; + char* openex_string = NULL; + u8 latency_timer; + + LOG_DEBUG("'ft2232' interface using FTD2XX with '%s' layout (%4.4x:%4.4x)", ft2232_layout, vid, pid); + +#if IS_WIN32 == 0 + /* Add non-standard Vid/Pid to the linux driver */ + if ( ( status = FT_SetVIDPID(vid, pid) ) != FT_OK ) + { + LOG_WARNING("couldn't add %4.4x:%4.4x", vid, pid); + } +#endif + + if (ft2232_device_desc && ft2232_serial) + { + LOG_WARNING("can't open by device description and serial number, giving precedence to serial"); + ft2232_device_desc = NULL; + } + + if (ft2232_device_desc) + { + openex_string = ft2232_device_desc; + openex_flags = FT_OPEN_BY_DESCRIPTION; } else if (ft2232_serial) { openex_string = ft2232_serial; - openex_flags = FT_OPEN_BY_SERIAL_NUMBER; + openex_flags = FT_OPEN_BY_SERIAL_NUMBER; } else { @@ -1443,11 +1781,33 @@ static int ft2232_init_ftd2xx(u16 vid, u16 pid, int more, int *try_more) return ERROR_JTAG_INIT_FAILED; } - if ((status = FT_OpenEx(openex_string, openex_flags, &ftdih)) != FT_OK) + status = FT_OpenEx(openex_string, openex_flags, &ftdih); + if( status != FT_OK ){ + // under Win32, the FTD2XX driver appends an "A" to the end + // of the description, if we tried by the desc, then + // try by the alternate "A" description. + if( openex_string == ft2232_device_desc ){ + // Try the alternate method. + openex_string = ft2232_device_desc_A; + status = FT_OpenEx(openex_string, openex_flags, &ftdih); + if( status == FT_OK ){ + // yea, the "alternate" method worked! + } else { + // drat, give the user a meaningfull message. + // telling the use we tried *BOTH* methods. + LOG_WARNING("Unable to open FTDI Device tried: '%s' and '%s'\n", + ft2232_device_desc, + ft2232_device_desc_A ); + } + } + } + + if ( status != FT_OK ) { DWORD num_devices; - if (more) { + if (more) + { LOG_WARNING("unable to open ftdi device (trying more): %lu", status); *try_more = 1; return ERROR_JTAG_INIT_FAILED; @@ -1456,11 +1816,12 @@ static int ft2232_init_ftd2xx(u16 vid, u16 pid, int more, int *try_more) status = FT_ListDevices(&num_devices, NULL, FT_LIST_NUMBER_ONLY); if (status == FT_OK) { - char **desc_array = malloc(sizeof(char*) * (num_devices + 1)); - int i; + char** desc_array = malloc( sizeof(char*) * (num_devices + 1) ); + u32 i; for (i = 0; i < num_devices; i++) desc_array[i] = malloc(64); + desc_array[num_devices] = NULL; status = FT_ListDevices(desc_array, &num_devices, FT_LIST_ALL | openex_flags); @@ -1474,6 +1835,7 @@ static int ft2232_init_ftd2xx(u16 vid, u16 pid, int more, int *try_more) for (i = 0; i < num_devices; i++) free(desc_array[i]); + free(desc_array); } else @@ -1483,13 +1845,13 @@ static int ft2232_init_ftd2xx(u16 vid, u16 pid, int more, int *try_more) return ERROR_JTAG_INIT_FAILED; } - if ((status = FT_SetLatencyTimer(ftdih, ft2232_latency)) != FT_OK) + if ( ( status = FT_SetLatencyTimer(ftdih, ft2232_latency) ) != FT_OK ) { LOG_ERROR("unable to set latency timer: %lu", status); return ERROR_JTAG_INIT_FAILED; } - if ((status = FT_GetLatencyTimer(ftdih, &latency_timer)) != FT_OK) + if ( ( status = FT_GetLatencyTimer(ftdih, &latency_timer) ) != FT_OK ) { LOG_ERROR("unable to get latency timer: %lu", status); return ERROR_JTAG_INIT_FAILED; @@ -1499,13 +1861,13 @@ static int ft2232_init_ftd2xx(u16 vid, u16 pid, int more, int *try_more) LOG_DEBUG("current latency timer: %i", latency_timer); } - if ((status = FT_SetTimeouts(ftdih, 5000, 5000)) != FT_OK) + if ( ( status = FT_SetTimeouts(ftdih, 5000, 5000) ) != FT_OK ) { LOG_ERROR("unable to set timeouts: %lu", status); return ERROR_JTAG_INIT_FAILED; } - if ((status = FT_SetBitMode(ftdih, 0x0b, 2)) != FT_OK) + if ( ( status = FT_SetBitMode(ftdih, 0x0b, 2) ) != FT_OK ) { LOG_ERROR("unable to enable bit i/o mode: %lu", status); return ERROR_JTAG_INIT_FAILED; @@ -1514,11 +1876,12 @@ static int ft2232_init_ftd2xx(u16 vid, u16 pid, int more, int *try_more) return ERROR_OK; } + static int ft2232_purge_ftd2xx(void) { FT_STATUS status; - if ((status = FT_Purge(ftdih, FT_PURGE_RX | FT_PURGE_TX)) != FT_OK) + if ( ( status = FT_Purge(ftdih, FT_PURGE_RX | FT_PURGE_TX) ) != FT_OK ) { LOG_ERROR("error purging ftd2xx device: %lu", status); return ERROR_JTAG_INIT_FAILED; @@ -1526,37 +1889,41 @@ static int ft2232_purge_ftd2xx(void) return ERROR_OK; } + + #endif /* BUILD_FT2232_FTD2XX == 1 */ #if BUILD_FT2232_LIBFTDI == 1 -static int ft2232_init_libftdi(u16 vid, u16 pid, int more, int *try_more) +static int ft2232_init_libftdi(u16 vid, u16 pid, int more, int* try_more) { u8 latency_timer; LOG_DEBUG("'ft2232' interface using libftdi with '%s' layout (%4.4x:%4.4x)", - ft2232_layout, vid, pid); + ft2232_layout, vid, pid); if (ftdi_init(&ftdic) < 0) return ERROR_JTAG_INIT_FAILED; + if (ftdi_set_interface(&ftdic, INTERFACE_A) < 0) + { + LOG_ERROR("unable to select FT2232 channel A: %s", ftdic.error_str); + return ERROR_JTAG_INIT_FAILED; + } + /* context, vendor id, product id */ if (ftdi_usb_open_desc(&ftdic, vid, pid, ft2232_device_desc, - ft2232_serial) < 0) { + ft2232_serial) < 0) + { if (more) LOG_WARNING("unable to open ftdi device (trying more): %s", - ftdic.error_str); + ftdic.error_str); else LOG_ERROR("unable to open ftdi device: %s", ftdic.error_str); *try_more = 1; return ERROR_JTAG_INIT_FAILED; } - if (ftdi_set_interface(&ftdic, INTERFACE_A) < 0) - { - LOG_ERROR("unable to select FT2232 channel A: %s", ftdic.error_str); - return ERROR_JTAG_INIT_FAILED; - } - + /* There is already a reset in ftdi_usb_open_desc, this should be redundant */ if (ftdi_usb_reset(&ftdic) < 0) { LOG_ERROR("unable to reset ftdi device"); @@ -1584,6 +1951,7 @@ static int ft2232_init_libftdi(u16 vid, u16 pid, int more, int *try_more) return ERROR_OK; } + static int ft2232_purge_libftdi(void) { if (ftdi_usb_purge_buffers(&ftdic) < 0) @@ -1594,17 +1962,28 @@ static int ft2232_purge_libftdi(void) return ERROR_OK; } + + #endif /* BUILD_FT2232_LIBFTDI == 1 */ -int ft2232_init(void) +static int ft2232_init(void) { - u8 buf[1]; + u8 buf[1]; int retval; u32 bytes_written; - ft2232_layout_t *cur_layout = ft2232_layouts; + ft2232_layout_t* cur_layout = ft2232_layouts; int i; - if ((ft2232_layout == NULL) || (ft2232_layout[0] == 0)) + if (tap_get_tms_path_len(TAP_IRPAUSE,TAP_IRPAUSE)==7) + { + LOG_DEBUG("ft2232 interface using 7 step jtag state transitions"); + } + else + { + LOG_DEBUG("ft2232 interface using shortest path jtag state transitions"); + + } + if ( (ft2232_layout == NULL) || (ft2232_layout[0] == 0) ) { ft2232_layout = "usbjtag"; LOG_WARNING("No ft2232 layout specified, using default 'usbjtag'"); @@ -1626,7 +2005,8 @@ int ft2232_init(void) return ERROR_JTAG_INIT_FAILED; } - for (i = 0; 1; i++) { + for (i = 0; 1; i++) + { /* * "more indicates that there are more IDs to try, so we should * not print an error for an ID mismatch (but for anything @@ -1636,15 +2016,15 @@ int ft2232_init(void) * ID mismatch (and nothing else) and that we should proceeed * with the next ID pair. */ - int more = ft2232_vid[i+1] || ft2232_pid[i+1]; + int more = ft2232_vid[i + 1] || ft2232_pid[i + 1]; int try_more = 0; #if BUILD_FT2232_FTD2XX == 1 retval = ft2232_init_ftd2xx(ft2232_vid[i], ft2232_pid[i], - more, &try_more); + more, &try_more); #elif BUILD_FT2232_LIBFTDI == 1 retval = ft2232_init_libftdi(ft2232_vid[i], ft2232_pid[i], - more, &try_more); + more, &try_more); #endif if (retval >= 0) break; @@ -1661,7 +2041,7 @@ int ft2232_init(void) ft2232_speed(jtag_speed); buf[0] = 0x85; /* Disconnect TDI/DO to TDO/DI for Loopback */ - if (((retval = ft2232_write(buf, 1, &bytes_written)) != ERROR_OK) || (bytes_written != 1)) + if ( ( ( retval = ft2232_write(buf, 1, &bytes_written) ) != ERROR_OK ) || (bytes_written != 1) ) { LOG_ERROR("couldn't write to FT2232 to disable loopback"); return ERROR_JTAG_INIT_FAILED; @@ -1676,26 +2056,27 @@ int ft2232_init(void) return ERROR_OK; } -int usbjtag_init(void) + +static int usbjtag_init(void) { - u8 buf[3]; + u8 buf[3]; u32 bytes_written; - low_output = 0x08; + low_output = 0x08; low_direction = 0x0b; if (strcmp(ft2232_layout, "usbjtag") == 0) { - nTRST = 0x10; + nTRST = 0x10; nTRSTnOE = 0x10; - nSRST = 0x40; + nSRST = 0x40; nSRSTnOE = 0x40; } else if (strcmp(ft2232_layout, "signalyzer") == 0) { - nTRST = 0x10; + nTRST = 0x10; nTRSTnOE = 0x10; - nSRST = 0x20; + nSRST = 0x20; nSRSTnOE = 0x20; } else if (strcmp(ft2232_layout, "evb_lm3s811") == 0) @@ -1704,7 +2085,7 @@ int usbjtag_init(void) nTRSTnOE = 0x00; nSRST = 0x20; nSRSTnOE = 0x20; - low_output = 0x88; + low_output = 0x88; low_direction = 0x8b; } else @@ -1716,32 +2097,32 @@ int usbjtag_init(void) if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) { low_direction &= ~nTRSTnOE; /* nTRST input */ - low_output &= ~nTRST; /* nTRST = 0 */ + low_output &= ~nTRST; /* nTRST = 0 */ } else { - low_direction |= nTRSTnOE; /* nTRST output */ - low_output |= nTRST; /* nTRST = 1 */ + low_direction |= nTRSTnOE; /* nTRST output */ + low_output |= nTRST; /* nTRST = 1 */ } if (jtag_reset_config & RESET_SRST_PUSH_PULL) { - low_direction |= nSRSTnOE; /* nSRST output */ - low_output |= nSRST; /* nSRST = 1 */ + low_direction |= nSRSTnOE; /* nSRST output */ + low_output |= nSRST; /* nSRST = 1 */ } else { low_direction &= ~nSRSTnOE; /* nSRST input */ - low_output &= ~nSRST; /* nSRST = 0 */ + low_output &= ~nSRST; /* nSRST = 0 */ } /* initialize low byte for jtag */ - buf[0] = 0x80; /* command "set data bits low byte" */ - buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, xRST high) */ + buf[0] = 0x80; /* command "set data bits low byte" */ + buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, xRST high) */ buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in */ LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) + if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) { LOG_ERROR("couldn't initialize FT2232 with 'USBJTAG' layout"); return ERROR_JTAG_INIT_FAILED; @@ -1750,21 +2131,22 @@ int usbjtag_init(void) return ERROR_OK; } -int axm0432_jtag_init(void) + +static int axm0432_jtag_init(void) { - u8 buf[3]; + u8 buf[3]; u32 bytes_written; - low_output = 0x08; + low_output = 0x08; low_direction = 0x2b; /* initialize low byte for jtag */ - buf[0] = 0x80; /* command "set data bits low byte" */ - buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */ + buf[0] = 0x80; /* command "set data bits low byte" */ + buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */ buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */ LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) + if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) { LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout"); return ERROR_JTAG_INIT_FAILED; @@ -1772,10 +2154,10 @@ int axm0432_jtag_init(void) if (strcmp(layout->name, "axm0432_jtag") == 0) { - nTRST = 0x08; - nTRSTnOE = 0x0; /* No output enable for TRST*/ - nSRST = 0x04; - nSRSTnOE = 0x0; /* No output enable for SRST*/ + nTRST = 0x08; + nTRSTnOE = 0x0; /* No output enable for TRST*/ + nSRST = 0x04; + nSRSTnOE = 0x0; /* No output enable for SRST*/ } else { @@ -1783,7 +2165,7 @@ int axm0432_jtag_init(void) exit(-1); } - high_output = 0x0; + high_output = 0x0; high_direction = 0x0c; if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) @@ -1805,12 +2187,12 @@ int axm0432_jtag_init(void) } /* initialize high port */ - buf[0] = 0x82; /* command "set data bits high byte" */ - buf[1] = high_output; /* value */ - buf[2] = high_direction; /* all outputs (xRST and xRSTnOE) */ + buf[0] = 0x82; /* command "set data bits high byte" */ + buf[1] = high_output; /* value */ + buf[2] = high_direction; /* all outputs (xRST and xRSTnOE) */ LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) + if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) { LOG_ERROR("couldn't initialize FT2232 with 'Dicarlo' layout"); return ERROR_JTAG_INIT_FAILED; @@ -1819,21 +2201,22 @@ int axm0432_jtag_init(void) return ERROR_OK; } -int jtagkey_init(void) + +static int jtagkey_init(void) { - u8 buf[3]; + u8 buf[3]; u32 bytes_written; - low_output = 0x08; + low_output = 0x08; low_direction = 0x1b; /* initialize low byte for jtag */ - buf[0] = 0x80; /* command "set data bits low byte" */ - buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */ + buf[0] = 0x80; /* command "set data bits low byte" */ + buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */ buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */ LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) + if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) { LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout"); return ERROR_JTAG_INIT_FAILED; @@ -1841,17 +2224,17 @@ int jtagkey_init(void) if (strcmp(layout->name, "jtagkey") == 0) { - nTRST = 0x01; + nTRST = 0x01; nTRSTnOE = 0x4; - nSRST = 0x02; + nSRST = 0x02; nSRSTnOE = 0x08; } - else if ((strcmp(layout->name, "jtagkey_prototype_v1") == 0) || - (strcmp(layout->name, "oocdlink") == 0)) + else if ( (strcmp(layout->name, "jtagkey_prototype_v1") == 0) + || (strcmp(layout->name, "oocdlink") == 0) ) { - nTRST = 0x02; + nTRST = 0x02; nTRSTnOE = 0x1; - nSRST = 0x08; + nSRST = 0x08; nSRSTnOE = 0x04; } else @@ -1860,7 +2243,7 @@ int jtagkey_init(void) exit(-1); } - high_output = 0x0; + high_output = 0x0; high_direction = 0x0f; if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) @@ -1886,12 +2269,12 @@ int jtagkey_init(void) } /* initialize high port */ - buf[0] = 0x82; /* command "set data bits high byte" */ - buf[1] = high_output; /* value */ - buf[2] = high_direction; /* all outputs (xRST and xRSTnOE) */ + buf[0] = 0x82; /* command "set data bits high byte" */ + buf[1] = high_output; /* value */ + buf[2] = high_direction; /* all outputs (xRST and xRSTnOE) */ LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) + if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) { LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout"); return ERROR_JTAG_INIT_FAILED; @@ -1900,32 +2283,33 @@ int jtagkey_init(void) return ERROR_OK; } -int olimex_jtag_init(void) + +static int olimex_jtag_init(void) { - u8 buf[3]; + u8 buf[3]; u32 bytes_written; - low_output = 0x08; + low_output = 0x08; low_direction = 0x1b; /* initialize low byte for jtag */ - buf[0] = 0x80; /* command "set data bits low byte" */ - buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */ + buf[0] = 0x80; /* command "set data bits low byte" */ + buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */ buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */ LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) + if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) { LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout"); return ERROR_JTAG_INIT_FAILED; } - nTRST = 0x01; + nTRST = 0x01; nTRSTnOE = 0x4; - nSRST = 0x02; + nSRST = 0x02; nSRSTnOE = 0x00; /* no output enable for nSRST */ - high_output = 0x0; + high_output = 0x0; high_direction = 0x0f; if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) @@ -1952,12 +2336,12 @@ int olimex_jtag_init(void) high_output |= 0x08; /* initialize high port */ - buf[0] = 0x82; /* command "set data bits high byte" */ - buf[1] = high_output; /* value */ - buf[2] = high_direction; /* all outputs (xRST and xRSTnOE) */ + buf[0] = 0x82; /* command "set data bits high byte" */ + buf[1] = high_output; /* value */ + buf[2] = high_direction; /* all outputs (xRST and xRSTnOE) */ LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) + if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) { LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout"); return ERROR_JTAG_INIT_FAILED; @@ -1966,44 +2350,45 @@ int olimex_jtag_init(void) return ERROR_OK; } -int flyswatter_init(void) + +static int flyswatter_init(void) { - u8 buf[3]; + u8 buf[3]; u32 bytes_written; - low_output = 0x18; + low_output = 0x18; low_direction = 0xfb; /* initialize low byte for jtag */ - buf[0] = 0x80; /* command "set data bits low byte" */ - buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */ + buf[0] = 0x80; /* command "set data bits low byte" */ + buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */ buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE[12]=out, n[ST]srst=out */ LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) + if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) { LOG_ERROR("couldn't initialize FT2232 with 'flyswatter' layout"); return ERROR_JTAG_INIT_FAILED; } - nTRST = 0x10; - nTRSTnOE = 0x0; /* not output enable for nTRST */ - nSRST = 0x20; - nSRSTnOE = 0x00; /* no output enable for nSRST */ + nTRST = 0x10; + nTRSTnOE = 0x0; /* not output enable for nTRST */ + nSRST = 0x20; + nSRSTnOE = 0x00; /* no output enable for nSRST */ - high_output = 0x00; + high_output = 0x00; high_direction = 0x0c; - /* turn red LED1 on, LED2 off */ + /* turn red LED3 on, LED2 off */ high_output |= 0x08; /* initialize high port */ - buf[0] = 0x82; /* command "set data bits high byte" */ - buf[1] = high_output; /* value */ - buf[2] = high_direction; /* all outputs (xRST and xRSTnOE) */ + buf[0] = 0x82; /* command "set data bits high byte" */ + buf[1] = high_output; /* value */ + buf[2] = high_direction; /* all outputs (xRST and xRSTnOE) */ LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) + if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) { LOG_ERROR("couldn't initialize FT2232 with 'flyswatter' layout"); return ERROR_JTAG_INIT_FAILED; @@ -2012,21 +2397,22 @@ int flyswatter_init(void) return ERROR_OK; } -int turtle_init(void) + +static int turtle_init(void) { - u8 buf[3]; + u8 buf[3]; u32 bytes_written; - low_output = 0x08; + low_output = 0x08; low_direction = 0x5b; /* initialize low byte for jtag */ - buf[0] = 0x80; /* command "set data bits low byte" */ - buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */ + buf[0] = 0x80; /* command "set data bits low byte" */ + buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */ buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */ LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) + if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) { LOG_ERROR("couldn't initialize FT2232 with 'turtelizer2' layout"); return ERROR_JTAG_INIT_FAILED; @@ -2034,7 +2420,7 @@ int turtle_init(void) nSRST = 0x40; - high_output = 0x00; + high_output = 0x00; high_direction = 0x0C; /* initialize high port */ @@ -2043,7 +2429,7 @@ int turtle_init(void) buf[2] = high_direction; LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) + if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) { LOG_ERROR("couldn't initialize FT2232 with 'turtelizer2' layout"); return ERROR_JTAG_INIT_FAILED; @@ -2052,32 +2438,33 @@ int turtle_init(void) return ERROR_OK; } -int comstick_init(void) + +static int comstick_init(void) { - u8 buf[3]; + u8 buf[3]; u32 bytes_written; - low_output = 0x08; + low_output = 0x08; low_direction = 0x0b; /* initialize low byte for jtag */ - buf[0] = 0x80; /* command "set data bits low byte" */ - buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */ + buf[0] = 0x80; /* command "set data bits low byte" */ + buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */ buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */ LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) + if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) { LOG_ERROR("couldn't initialize FT2232 with 'comstick' layout"); return ERROR_JTAG_INIT_FAILED; } - nTRST = 0x01; - nTRSTnOE = 0x00; /* no output enable for nTRST */ - nSRST = 0x02; - nSRSTnOE = 0x00; /* no output enable for nSRST */ + nTRST = 0x01; + nTRSTnOE = 0x00; /* no output enable for nTRST */ + nSRST = 0x02; + nSRSTnOE = 0x00; /* no output enable for nSRST */ - high_output = 0x03; + high_output = 0x03; high_direction = 0x03; /* initialize high port */ @@ -2086,7 +2473,7 @@ int comstick_init(void) buf[2] = high_direction; LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) + if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) { LOG_ERROR("couldn't initialize FT2232 with 'comstick' layout"); return ERROR_JTAG_INIT_FAILED; @@ -2095,32 +2482,33 @@ int comstick_init(void) return ERROR_OK; } -int stm32stick_init(void) + +static int stm32stick_init(void) { - u8 buf[3]; + u8 buf[3]; u32 bytes_written; - low_output = 0x88; + low_output = 0x88; low_direction = 0x8b; /* initialize low byte for jtag */ - buf[0] = 0x80; /* command "set data bits low byte" */ - buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */ + buf[0] = 0x80; /* command "set data bits low byte" */ + buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */ buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */ LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) + if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) { LOG_ERROR("couldn't initialize FT2232 with 'stm32stick' layout"); return ERROR_JTAG_INIT_FAILED; } - nTRST = 0x01; - nTRSTnOE = 0x00; /* no output enable for nTRST */ - nSRST = 0x80; - nSRSTnOE = 0x00; /* no output enable for nSRST */ + nTRST = 0x01; + nTRSTnOE = 0x00; /* no output enable for nTRST */ + nSRST = 0x80; + nSRSTnOE = 0x00; /* no output enable for nSRST */ - high_output = 0x01; + high_output = 0x01; high_direction = 0x03; /* initialize high port */ @@ -2129,7 +2517,102 @@ int stm32stick_init(void) buf[2] = high_direction; LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); + if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) + { + LOG_ERROR("couldn't initialize FT2232 with 'stm32stick' layout"); + return ERROR_JTAG_INIT_FAILED; + } + + return ERROR_OK; +} + + +static int sheevaplug_init(void) +{ + u8 buf[3]; + u32 bytes_written; + + low_output = 0x08; + low_direction = 0x1b; + + /* initialize low byte for jtag */ + buf[0] = 0x80; /* command "set data bits low byte" */ + buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */ + buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in */ + LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); + + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) + { + LOG_ERROR("couldn't initialize FT2232 with 'sheevaplug' layout"); + return ERROR_JTAG_INIT_FAILED; + } + + nTRSTnOE = 0x1; + nTRST = 0x02; + nSRSTnOE = 0x4; + nSRST = 0x08; + + high_output = 0x0; + high_direction = 0x0f; + + /* nTRST is always push-pull */ + high_output &= ~nTRSTnOE; + high_output |= nTRST; + + /* nSRST is always open-drain */ + high_output |= nSRSTnOE; + high_output &= ~nSRST; + + /* initialize high port */ + buf[0] = 0x82; /* command "set data bits high byte" */ + buf[1] = high_output; /* value */ + buf[2] = high_direction; /* all outputs - xRST */ + LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) + { + LOG_ERROR("couldn't initialize FT2232 with 'sheevaplug' layout"); + return ERROR_JTAG_INIT_FAILED; + } + + return ERROR_OK; +} + +static int cortino_jtag_init(void) +{ + u8 buf[3]; + u32 bytes_written; + + low_output = 0x08; + low_direction = 0x1b; + + /* initialize low byte for jtag */ + buf[0] = 0x80; /* command "set data bits low byte" */ + buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */ + buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */ + LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); + + if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) + { + LOG_ERROR("couldn't initialize FT2232 with 'cortino' layout"); + return ERROR_JTAG_INIT_FAILED; + } + + nTRST = 0x01; + nTRSTnOE = 0x00; /* no output enable for nTRST */ + nSRST = 0x02; + nSRSTnOE = 0x00; /* no output enable for nSRST */ + + high_output = 0x03; + high_direction = 0x03; + + /* initialize high port */ + buf[0] = 0x82; /* command "set data bits high byte" */ + buf[1] = high_output; + buf[2] = high_direction; + LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); + + if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) { LOG_ERROR("couldn't initialize FT2232 with 'stm32stick' layout"); return ERROR_JTAG_INIT_FAILED; @@ -2138,7 +2621,7 @@ int stm32stick_init(void) return ERROR_OK; } -void olimex_jtag_blink(void) +static void olimex_jtag_blink(void) { /* Olimex ARM-USB-OCD has a LED connected to ACBUS3 * ACBUS3 is bit 3 of the GPIOH port @@ -2154,15 +2637,29 @@ void olimex_jtag_blink(void) high_output |= 0x08; } - BUFFER_ADD = 0x82; - BUFFER_ADD = high_output; - BUFFER_ADD = high_direction; + buffer_write( 0x82 ); + buffer_write( high_output ); + buffer_write( high_direction ); } -void turtle_jtag_blink(void) + +static void flyswatter_jtag_blink(void) { /* - * Turtelizer2 has two LEDs connected to ACBUS2 and ACBUS3 + * Flyswatter has two LEDs connected to ACBUS2 and ACBUS3 + */ + high_output ^= 0x0c; + + buffer_write( 0x82 ); + buffer_write( high_output ); + buffer_write( high_direction ); +} + + +static void turtle_jtag_blink(void) +{ + /* + * Turtelizer2 has two LEDs connected to ACBUS2 and ACBUS3 */ if (high_output & 0x08) { @@ -2173,20 +2670,19 @@ void turtle_jtag_blink(void) high_output = 0x08; } - BUFFER_ADD = 0x82; - BUFFER_ADD = high_output; - BUFFER_ADD = high_direction; + buffer_write( 0x82 ); + buffer_write( high_output ); + buffer_write( high_direction ); } -int ft2232_quit(void) + +static int ft2232_quit(void) { #if BUILD_FT2232_FTD2XX == 1 FT_STATUS status; status = FT_Close(ftdih); #elif BUILD_FT2232_LIBFTDI == 1 - ftdi_disable_bitbang(&ftdic); - ftdi_usb_close(&ftdic); ftdi_deinit(&ftdic); @@ -2198,11 +2694,32 @@ int ft2232_quit(void) return ERROR_OK; } -int ft2232_handle_device_desc_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc) + +static int ft2232_handle_device_desc_command(struct command_context_s* cmd_ctx, char* cmd, char** args, int argc) { + char *cp; + char buf[200]; if (argc == 1) { ft2232_device_desc = strdup(args[0]); + cp = strchr( ft2232_device_desc, 0 ); + // under Win32, the FTD2XX driver appends an "A" to the end + // of the description, this examines the given desc + // and creates the 'missing' _A or non_A variable. + if( (cp[-1] == 'A') && (cp[-2]==' ') ){ + // it was, so make this the "A" version. + ft2232_device_desc_A = ft2232_device_desc; + // and *CREATE* the non-A version. + strcpy( buf, ft2232_device_desc ); + cp = strchr( buf, 0 ); + cp[-2] = 0; + ft2232_device_desc = strdup( buf ); + } else { + // A not defined + // so create it + sprintf( buf, "%s A", ft2232_device_desc ); + ft2232_device_desc_A = strdup( buf ); + } } else { @@ -2212,7 +2729,8 @@ int ft2232_handle_device_desc_command(struct command_context_s *cmd_ctx, char *c return ERROR_OK; } -int ft2232_handle_serial_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc) + +static int ft2232_handle_serial_command(struct command_context_s* cmd_ctx, char* cmd, char** args, int argc) { if (argc == 1) { @@ -2226,7 +2744,8 @@ int ft2232_handle_serial_command(struct command_context_s *cmd_ctx, char *cmd, c return ERROR_OK; } -int ft2232_handle_layout_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc) + +static int ft2232_handle_layout_command(struct command_context_s* cmd_ctx, char* cmd, char** args, int argc) { if (argc == 0) return ERROR_OK; @@ -2237,26 +2756,30 @@ int ft2232_handle_layout_command(struct command_context_s *cmd_ctx, char *cmd, c return ERROR_OK; } -int ft2232_handle_vid_pid_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc) + +static int ft2232_handle_vid_pid_command(struct command_context_s* cmd_ctx, char* cmd, char** args, int argc) { int i; - if (argc > MAX_USB_IDS*2) { + if (argc > MAX_USB_IDS * 2) + { LOG_WARNING("ignoring extra IDs in ft2232_vid_pid " - "(maximum is %d pairs)", MAX_USB_IDS); - argc = MAX_USB_IDS*2; + "(maximum is %d pairs)", MAX_USB_IDS); + argc = MAX_USB_IDS * 2; } - if (argc < 2 || (argc & 1)) + if ( argc < 2 || (argc & 1) ) { LOG_WARNING("incomplete ft2232_vid_pid configuration directive"); if (argc < 2) return ERROR_OK; } - for (i = 0; i+1 < argc; i += 2) { + for (i = 0; i + 1 < argc; i += 2) + { ft2232_vid[i >> 1] = strtol(args[i], NULL, 0); - ft2232_pid[i >> 1] = strtol(args[i+1], NULL, 0); + ft2232_pid[i >> 1] = strtol(args[i + 1], NULL, 0); } + /* * Explicitly terminate, in case there are multiples instances of * ft2232_vid_pid. @@ -2266,7 +2789,8 @@ int ft2232_handle_vid_pid_command(struct command_context_s *cmd_ctx, char *cmd, return ERROR_OK; } -int ft2232_handle_latency_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc) + +static int ft2232_handle_latency_command(struct command_context_s* cmd_ctx, char* cmd, char** args, int argc) { if (argc == 1) { @@ -2279,3 +2803,150 @@ int ft2232_handle_latency_command(struct command_context_s *cmd_ctx, char *cmd, return ERROR_OK; } + + +static int ft2232_stableclocks(int num_cycles, jtag_command_t* cmd) +{ + int retval = 0; + + /* 7 bits of either ones or zeros. */ + u8 tms = (tap_get_state() == TAP_RESET ? 0x7F : 0x00); + + while (num_cycles > 0) + { + /* the command 0x4b, "Clock Data to TMS/CS Pin (no Read)" handles + * at most 7 bits per invocation. Here we invoke it potentially + * several times. + */ + int bitcount_per_command = (num_cycles > 7) ? 7 : num_cycles; + + if (ft2232_buffer_size + 3 >= FT2232_BUFFER_SIZE) + { + if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK) + retval = ERROR_JTAG_QUEUE_FAILED; + + first_unsent = cmd; + } + + /* there are no state transitions in this code, so omit state tracking */ + + /* command "Clock Data to TMS/CS Pin (no Read)" */ + buffer_write( 0x4b ); + + /* scan 7 bit */ + buffer_write( bitcount_per_command - 1 ); + + /* TMS data bits are either all zeros or ones to stay in the current stable state */ + buffer_write( tms ); + + require_send = 1; + + num_cycles -= bitcount_per_command; + } + + return retval; +} + + +/* --------------------------------------------------------------------- + * Support for IceBear JTAG adapter from Section5: + * http://section5.ch/icebear + * + * Author: Sten, debian@sansys-electronic.com + */ + +/* Icebear pin layout + * + * ADBUS5 (nEMU) nSRST | 2 1| GND (10k->VCC) + * GND GND | 4 3| n.c. + * ADBUS3 TMS | 6 5| ADBUS6 VCC + * ADBUS0 TCK | 8 7| ADBUS7 (GND) + * ADBUS4 nTRST |10 9| ACBUS0 (GND) + * ADBUS1 TDI |12 11| ACBUS1 (GND) + * ADBUS2 TDO |14 13| GND GND + * + * ADBUS0 O L TCK ACBUS0 GND + * ADBUS1 O L TDI ACBUS1 GND + * ADBUS2 I TDO ACBUS2 n.c. + * ADBUS3 O H TMS ACBUS3 n.c. + * ADBUS4 O H nTRST + * ADBUS5 O H nSRST + * ADBUS6 - VCC + * ADBUS7 - GND + */ +static int icebear_jtag_init(void) { + u8 buf[3]; + u32 bytes_written; + + low_direction = 0x0b; /* output: TCK TDI TMS; input: TDO */ + low_output = 0x08; /* high: TMS; low: TCK TDI */ + nTRST = 0x10; + nSRST = 0x20; + + if ((jtag_reset_config & RESET_TRST_OPEN_DRAIN) != 0) { + low_direction &= ~nTRST; /* nTRST high impedance */ + } + else { + low_direction |= nTRST; + low_output |= nTRST; + } + + low_direction |= nSRST; + low_output |= nSRST; + + /* initialize low byte for jtag */ + buf[0] = 0x80; /* command "set data bits low byte" */ + buf[1] = low_output; + buf[2] = low_direction; + LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); + + if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) { + LOG_ERROR("couldn't initialize FT2232 with 'IceBear' layout (low)"); + return ERROR_JTAG_INIT_FAILED; + } + + high_output = 0x0; + high_direction = 0x00; + + + /* initialize high port */ + buf[0] = 0x82; /* command "set data bits high byte" */ + buf[1] = high_output; /* value */ + buf[2] = high_direction; /* all outputs (xRST and xRSTnOE) */ + LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); + + if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) { + LOG_ERROR("couldn't initialize FT2232 with 'IceBear' layout (high)"); + return ERROR_JTAG_INIT_FAILED; + } + + return ERROR_OK; +} + +static void icebear_jtag_reset(int trst, int srst) { + + if (trst == 1) { + low_direction |= nTRST; + low_output &= ~nTRST; + } + else if (trst == 0) { + if ((jtag_reset_config & RESET_TRST_OPEN_DRAIN) != 0) + low_direction &= ~nTRST; + else + low_output |= nTRST; + } + + if (srst == 1) { + low_output &= ~nSRST; + } + else if (srst == 0) { + low_output |= nSRST; + } + + /* command "set data bits low byte" */ + buffer_write( 0x80 ); + buffer_write( low_output ); + buffer_write( low_direction ); + + LOG_DEBUG("trst: %i, srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x", trst, srst, low_output, low_direction); +}