X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=src%2Fjtag%2Fstartup.tcl;h=d57cafb23aa18bde0c84f1830d156903acb79e50;hp=c49c43e1b46d74451f85a8fe3b4885d8c9d86941;hb=d1b74376336814266236054f925a9964b87dd8a5;hpb=96f9790279f74f39b35fc3ad09340fd03123180c

diff --git a/src/jtag/startup.tcl b/src/jtag/startup.tcl
index c49c43e1b4..d57cafb23a 100644
--- a/src/jtag/startup.tcl
+++ b/src/jtag/startup.tcl
@@ -21,7 +21,9 @@ proc jtag_init {} {
 # startup (at OpenOCD server startup, when JTAG may not yet work); and
 # potentially more (for reset types like cold, warm, etc)
 proc init_reset { mode } {
-	jtag arp_init-reset
+	if {[using_jtag]} {
+		jtag arp_init-reset
+	}
 }
 
 #########
@@ -30,7 +32,7 @@ proc init_reset { mode } {
 # documented nor supported except on ZY1000.
 
 proc power_restore {} {
-	puts "Sensed power restore, running reset init and halting GDB."
+	echo "Sensed power restore, running reset init and halting GDB."
 	reset init
 	
 	# Halt GDB so user can deal with a detected power restore.
@@ -47,7 +49,7 @@ proc power_restore {} {
 add_help_text power_restore "Overridable procedure run when power restore is detected. Runs 'reset init' by default."
 
 proc power_dropout {} {
-	puts "Sensed power dropout."
+	echo "Sensed power dropout."
 }
 
 #########
@@ -56,7 +58,7 @@ proc power_dropout {} {
 # documented nor supported except on ZY1000.
 
 proc srst_deasserted {} {
-	puts "Sensed nSRST deasserted, running reset init and halting GDB."
+	echo "Sensed nSRST deasserted, running reset init and halting GDB."
 	reset init
 
 	# Halt GDB so user can deal with a detected reset.
@@ -73,14 +75,89 @@ proc srst_deasserted {} {
 add_help_text srst_deasserted "Overridable procedure run when srst deassert is detected. Runs 'reset init' by default."
 
 proc srst_asserted {} {
-	puts "Sensed nSRST asserted."
+	echo "Sensed nSRST asserted."
+}
+
+# measure actual JTAG clock
+proc measure_clk {} {
+	set start_time [ms];
+        set iterations 10000000;
+	runtest $iterations;
+	echo "Running at more than [expr $iterations.0 / ([ms]-$start_time)] kHz";
+}
+
+add_help_text measure_clk "Runs a test to measure the JTAG clk. Useful with RCLK / RTCK."
+
+proc default_to_jtag { f args } {
+	set current_transport [transport select]
+	if {[using_jtag]} {
+		eval $f $args
+	} {
+		error "session transport is \"$current_transport\" but your config requires JTAG"
+	}
+}
+
+proc jtag args {
+	eval default_to_jtag jtag $args
+}
+
+proc jtag_rclk args {
+	eval default_to_jtag jtag_rclk $args
+}
+
+proc jtag_ntrst_delay args {
+	eval default_to_jtag jtag_ntrst_delay $args
+}
+
+proc jtag_ntrst_assert_width args {
+	eval default_to_jtag jtag_ntrst_assert_width $args
 }
 
 # BEGIN MIGRATION AIDS ...  these adapter operations originally had
 # JTAG-specific names despite the fact that the operations were not
-# specific to JTAG.
+# specific to JTAG, or otherewise had troublesome/misleading names.
 #
 # FIXME phase these aids out after about April 2011
 #
-proc jtag_khz args { eval adapter_khz $args }
+proc jtag_khz args {
+	echo "DEPRECATED! use 'adapter_khz' not 'jtag_khz'"
+	eval adapter_khz $args
+}
+
+proc jtag_nsrst_delay args {
+	echo "DEPRECATED! use 'adapter_nsrst_delay' not 'jtag_nsrst_delay'"
+	eval adapter_nsrst_delay $args
+}
+
+proc jtag_nsrst_assert_width args {
+	echo "DEPRECATED! use 'adapter_nsrst_assert_width' not 'jtag_nsrst_assert_width'"
+	eval adapter_nsrst_assert_width $args
+}
+
+# stlink migration helpers
+proc stlink_device_desc args {
+	echo "DEPRECATED! use 'hla_device_desc' not 'stlink_device_desc'"
+	eval hla_device_desc $args
+}
+
+proc stlink_serial args {
+	echo "DEPRECATED! use 'hla_serial' not 'stlink_serial'"
+	eval hla_serial $args
+}
+
+proc stlink_layout args {
+	echo "DEPRECATED! use 'hla_layout' not 'stlink_layout'"
+	eval hla_layout $args
+}
+
+proc stlink_vid_pid args {
+	echo "DEPRECATED! use 'hla_vid_pid' not 'stlink_vid_pid'"
+	eval hla_vid_pid $args
+}
+
+proc stlink args {
+	echo "DEPRECATED! use 'hla' not 'stlink'"
+	eval hla $args
+}
+
 # END MIGRATION AIDS