X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=src%2Fserver%2Fhttpd%2Fupgrade.tcl;h=11a73d3ef4ed212c39ce386789295470c55ecbe8;hp=c09cc8c18464ac857abedcb6d3f73cb2a7a5742f;hb=ec7a984b42f5f7e6192963f0c09340227fdfa829;hpb=fb86d0e76d280c544f28ff1396c706f4e19d77ca diff --git a/src/server/httpd/upgrade.tcl b/src/server/httpd/upgrade.tcl index c09cc8c184..11a73d3ef4 100644 --- a/src/server/httpd/upgrade.tcl +++ b/src/server/httpd/upgrade.tcl @@ -1,418 +1,418 @@ -# converted to .tcl by html2tcl.tcl -set buffer "" -append buffer { - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Zylin ZY1000 JTAG debugger - - - -} - - set console "" - set upload_filename /ram/upload - -append buffer { - -
-
- - - -
-
-
-} -append buffer [capture version] -append buffer { -
-
-
- - - - - - - - - - -
-
-   -
-		 - - - - - - - - - - - - - - - - - - - - - - - - -
-
- -
- -
- -
- -
- -
-
-
-
-		 - - - - - - - - - - - - - -} - - - set toggle_details [formfetch toggle_details] - if {[string length $toggle_details]==0} { - set toggle_details 0 - } - set show_details [load_var show_details] - if {[string length $show_details]==0} { - set show_details 0 - } - if {$toggle_details==1} { - set show_details [expr 1-$show_details] - save_var show_details $show_details - } - - if {[string length $console]!=0} { - -append buffer { - - - -} - - } - -append buffer { - - - -
- - - - - - - - -
- - -
-Flash -
-		 -
-Memory -
-		 - - - -
-
-
-   -
-
-

Upgrade ZY1000 Firmware

-
- - } - - set form_action [formfetch form_action]; - set form_filecontent [formfetch form_filecontent]; - - append buffer {
} - if {[string compare $form_action "Upload"]==0} { - - if [string match ZylinPhiFirmware* $form_filecontent]==1 { - set form_filename /config/firmware.phi - puts "Writing firmware to $form_filename" - set fp [aio.open $form_filename w]; - $fp puts -nonewline $form_filecontent - $fp close - puts "Done writing firmware to $form_filename" - append buffer "
Upgraded Zylin JTAG, rebooting (wait ca. 30 seconds)...

" - reboot - } else { - append buffer "
Not a valid Zylin JTAG firmware file.
" - } - } elseif {[string compare $form_action "Restore factory settings"]==0} { - proc rmdir { dir } { - set entries {} - catch {set entries [ls $dir]} err - foreach { entry } $entries { - rmdir $dir/$entry - rm $dir/$entry - } - } - rmdir /config/settings - reboot - append buffer "Restoring factory settings (wait ca. 30 seconds)...
" - } else { - append buffer {
Upgrade Zylin JTAG firmware + reboot.

} - append buffer {
} - append buffer {
 
 
} - append buffer {
} - append buffer {
} - append buffer {

} - } - -append buffer { - -
- - -} - - if {$show_details==1} { - append buffer < - append buffer {td style="background-color:#dddddd;padding-left:5px;padding-right:5px;padding-top:3px;padding-bottom:3px;"} - append buffer > - } else { - append buffer < - append buffer {td style="background-image:url('menu_cuts/h_tab_free.png');width:110px;height:29px;background-repeat: no-repeat;background-position:top left;"} - append buffer > - } - -append buffer { - -} - - if {$show_details==1} { - append buffer "Hide details" - append buffer
- } else { - append buffer {
} - append buffer "Show details" - append buffer {
} - } - -append buffer { - -} - - if {$show_details==1} { - append buffer $console - } - -append buffer {} - - if {$show_details!=1} { - append buffer {} - } - -append buffer { - -
   
-
-
-   -
-
-		 - - - - - - - - - - - - - - - - - - - - - - - - -
-
- Documentation -
-		 -   - -
-
-Quick Start Manual -
-OpenOCD Manual -
-Contact Zylin AS -
-
- -
- - -
-
-
- - Upload new firmware file to ZY1000, verify that it is a valid ZY1000 firmware - file, and upgrade flash. -

- Restore factory settings restores all factory settings except the TCP/IP settings. -

- The current version of the firmware is visible at the top of the web page. -

- ZY1000 firmware can also be upgraded using serial port YModem upload. -

- Check for new firmware at http://www.zylin.com/zy1000.html - -

-   -
-
- - -
- - - - - - - - - - - - - - - - - - - - - - -} - -start_chunked "html" -write_chunked $buffer -end_chunked - +# converted to .tcl by html2tcl.tcl +set buffer "" +append buffer { + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Zylin ZY1000 JTAG debugger + + + +} + + set console "" + set upload_filename /ram/upload + +append buffer { + +
+
+ + + +
+
+
+} +append buffer [capture version] +append buffer { +
+
+
+ + + + + + + + + + +
+
+   +
+		 + + + + + + + + + + + + + + + + + + + + + + + + +
+
+ +
+ +
+ +
+ +
+ +
+
+
+
+		 + + + + + + + + + + + + + +} + + + set toggle_details [formfetch toggle_details] + if {[string length $toggle_details]==0} { + set toggle_details 0 + } + set show_details [load_var show_details] + if {[string length $show_details]==0} { + set show_details 0 + } + if {$toggle_details==1} { + set show_details [expr 1-$show_details] + save_var show_details $show_details + } + + if {[string length $console]!=0} { + +append buffer { + + + +} + + } + +append buffer { + + + +
+ + + + + + + + +
+ + +
+Flash +
+		 +
+Memory +
+		 + + + +
+
+
+   +
+
+

Upgrade ZY1000 Firmware

+
+ + } + + set form_action [formfetch form_action]; + set form_filecontent [formfetch form_filecontent]; + + append buffer {
} + if {[string compare $form_action "Upload"]==0} { + + if [string match ZylinPhiFirmware* $form_filecontent]==1 { + set form_filename /config/firmware.phi + puts "Writing firmware to $form_filename" + set fp [aio.open $form_filename w]; + $fp puts -nonewline $form_filecontent + $fp close + puts "Done writing firmware to $form_filename" + append buffer "
Upgraded Zylin JTAG, rebooting (wait ca. 30 seconds)...

" + reboot + } else { + append buffer "
Not a valid Zylin JTAG firmware file.
" + } + } elseif {[string compare $form_action "Restore factory settings"]==0} { + proc rmdir { dir } { + set entries {} + catch {set entries [ls $dir]} err + foreach { entry } $entries { + rmdir $dir/$entry + rm $dir/$entry + } + } + rmdir /config/settings + reboot + append buffer "Restoring factory settings (wait ca. 30 seconds)...
" + } else { + append buffer {
Upgrade Zylin JTAG firmware + reboot.

} + append buffer {
} + append buffer {
 
 
} + append buffer {
} + append buffer {
} + append buffer {

} + } + +append buffer { + +
+ + +} + + if {$show_details==1} { + append buffer < + append buffer {td style="background-color:#dddddd;padding-left:5px;padding-right:5px;padding-top:3px;padding-bottom:3px;"} + append buffer > + } else { + append buffer < + append buffer {td style="background-image:url('menu_cuts/h_tab_free.png');width:110px;height:29px;background-repeat: no-repeat;background-position:top left;"} + append buffer > + } + +append buffer { + +} + + if {$show_details==1} { + append buffer "Hide details" + append buffer
+ } else { + append buffer {
} + append buffer "Show details" + append buffer {
} + } + +append buffer { + +} + + if {$show_details==1} { + append buffer $console + } + +append buffer {} + + if {$show_details!=1} { + append buffer {} + } + +append buffer { + +
   
+
+
+   +
+
+		 + + + + + + + + + + + + + + + + + + + + + + + + +
+
+ Documentation +
+		 +   + +
+
+Quick Start Manual +
+OpenOCD Manual +
+Contact Zylin AS +
+
+ +
+ + +
+
+
+ + Upload new firmware file to ZY1000, verify that it is a valid ZY1000 firmware + file, and upgrade flash. +

+ Restore factory settings restores all factory settings except the TCP/IP settings. +

+ The current version of the firmware is visible at the top of the web page. +

+ ZY1000 firmware can also be upgraded using serial port YModem upload. +

+ Check for new firmware at http://www.zylin.com/zy1000.html + +

+   +
+
+ + +
+ + + + + + + + + + + + + + + + + + + + + + +} + +start_chunked "html" +write_chunked $buffer +end_chunked +