X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=src%2Ftarget%2Ftarget%2Fnslu2.cfg;h=c545e01f3b23b631c299972581d6887160ac70b8;hp=ba6a7973af7d343e8e6ab439c53f0241bee05221;hb=be968a54002b3387e0316c2fcce4ee93da840caa;hpb=75e69503b9ca22136e261f889058e003b4622286

diff --git a/src/target/target/nslu2.cfg b/src/target/target/nslu2.cfg
index ba6a7973af..c545e01f3b 100644
--- a/src/target/target/nslu2.cfg
+++ b/src/target/target/nslu2.cfg
@@ -1,22 +1,22 @@
-# use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config srst_only
-
-# jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 7 0x1 0x7f 0x7e
-
-# target configuration
-target xscale big reset_init 0 ixp42x
-run_and_halt_time 0 30
-
-# maps to PXA internal RAM.  If you are using a PXA255
-# you must initialize SDRAM or leave this option off
-working_area 0 0x00020000 0x10000 nobackup
-
-# flash bank <driver> <base> <size> <chip_width> <bus_width>
-#flash bank cfi 0x50000000 0x1000000 2 4 0 
-
-
-
-
-
+# use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config srst_only
+
+# jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 7 0x1 0x7f 0x7e
+
+# target configuration
+target create target0 xscale -endian big -chain-position 0 -variant ixp42x
+
+
+# maps to PXA internal RAM.  If you are using a PXA255
+# you must initialize SDRAM or leave this option off
+[new_target_name] configure -work-area-virt 0 -work-area-phys 0x00020000 -work-area-size 0x10000 -work-area-backup 0
+
+# flash bank <driver> <base> <size> <chip_width> <bus_width>
+#flash bank cfi 0x50000000 0x1000000 2 4 0 
+
+
+
+
+