X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=src%2Ftarget%2Ftarget%2Fsamsung_s3c2410.cfg;fp=src%2Ftarget%2Ftarget%2Fsamsung_s3c2410.cfg;h=0000000000000000000000000000000000000000;hp=3c0768bca705f451eb135278e6cf98a6e19bdbbd;hb=140d6c8e7948710a764965075bfaa700efd09802;hpb=7c0e823d0a57df99adc5b1b7975406bfd9e0d9fb

diff --git a/src/target/target/samsung_s3c2410.cfg b/src/target/target/samsung_s3c2410.cfg
deleted file mode 100644
index 3c0768bca7..0000000000
--- a/src/target/target/samsung_s3c2410.cfg
+++ /dev/null
@@ -1,35 +0,0 @@
-# Found on the 'TinCanTools' Hammer board.
-
-if { [info exists CHIPNAME] } {	
-   set  _CHIPNAME $CHIPNAME    
-} else {	 
-   set  _CHIPNAME s3c2410
-}
-
-if { [info exists ENDIAN] } {	
-   set  _ENDIAN $ENDIAN    
-} else {	 
-  # This config file was defaulting to big endian..
-   set  _ENDIAN little
-}
-
-if { [info exists CPUTAPID] } {	
-   set  _CPUTAPID $CPUTAPID    
-} else {	 
-   set  _CPUTAPID 0xffffffff
-}
-
-#use combined on interfaces or targets that cannot set TRST/SRST separately
-reset_config trst_and_srst
-
-#jtag scan chain
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm920t
-
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x30800000 -work-area-size 0x20000 -work-area-backup 0
-
-# speed up memory downloads
-arm7_9 fast_memory_access enable
-arm7_9 dcc_downloads enable