X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Fboard%2Fat91cap7a-stk-sdram.cfg;h=9bc02e8c0383bd563d1cda73202112c6dbf7bc2c;hp=72d9e0184847083abd7d44b9968715086ce26b60;hb=05c6c871e3328dd38dc46ea11b3b9b546feb7850;hpb=a72faf6405234d2b46e293edfffc7a00d21c7fc8

diff --git a/tcl/board/at91cap7a-stk-sdram.cfg b/tcl/board/at91cap7a-stk-sdram.cfg
index 72d9e01848..9bc02e8c03 100644
--- a/tcl/board/at91cap7a-stk-sdram.cfg
+++ b/tcl/board/at91cap7a-stk-sdram.cfg
@@ -15,7 +15,7 @@ if { [info exists ENDIAN] } {
    set  _ENDIAN little
 }
 
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
    set _CPUTAPID 0x40700f0f
@@ -24,11 +24,11 @@ if { [info exists CPUTAPID ] } {
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
 
 $_TARGETNAME configure -event reset-start {
 	# start off real slow when we're running off internal RC oscillator
-	jtag_khz 32
+	adapter_khz 32
 }
 
 proc peek32 {address} {
@@ -78,7 +78,7 @@ $_TARGETNAME configure -event reset-init {
 	echo "Master clock ok."
 	
 	# Now that we're up and running, crank up speed!
-	global post_reset_khz ;	jtag_khz $post_reset_khz
+	global post_reset_khz ;	adapter_khz $post_reset_khz
 	
 	echo "Configuring the SDRAM controller..."