X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Fboard%2Fek-lm3s1968.cfg;h=42f100feeb4cc436e41586c3c7b205da028b986e;hp=184d368e8108fd4f47c1f928099008df96df69aa;hb=8cbcd56c0e1b809f39e1f4088a01f05d51d7ca85;hpb=31b47688ca5015bc91fb3480135a9e4efd53586a

diff --git a/tcl/board/ek-lm3s1968.cfg b/tcl/board/ek-lm3s1968.cfg
index 184d368e81..42f100feeb 100644
--- a/tcl/board/ek-lm3s1968.cfg
+++ b/tcl/board/ek-lm3s1968.cfg
@@ -1,7 +1,8 @@
 #
 # TI/Luminary Stellaris LM3S1968 Evaluation Kits
 #
-# http://www.luminarymicro.com/products/lm3s1968_evaluation_kits.html
+# http://www.ti.com/tool/ek-lm3s1968
+#
 
 # NOTE:  to use J-Link instead of the on-board interface,
 # you may also need to reduce adapter_khz to be about 1200.
@@ -13,13 +14,6 @@
 source [find interface/luminary.cfg]
 
 # include the target config
+set WORKAREASIZE 0x2000
 set CHIPNAME lm3s1968
 source [find target/stellaris.cfg]
-
-# jtag speed
-adapter_khz 3000
-
-adapter_nsrst_delay 100
-
-#LM3S1968 Evaluation Board has only srst
-reset_config srst_only