X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Fboard%2Fek-lm3s1968.cfg;h=8d990b1983d88046e3870d7ba1c76e8ab772fc5b;hp=bf4b09724a344f5f47d4472a137d9ad1414d462f;hb=9d98f8b7a7d0a4c1d50c1d5d9df62dc2d0ede26c;hpb=a5d02116a6b1f996ddbca8d9b0b10a602bc274d8

diff --git a/tcl/board/ek-lm3s1968.cfg b/tcl/board/ek-lm3s1968.cfg
index bf4b09724a..8d990b1983 100644
--- a/tcl/board/ek-lm3s1968.cfg
+++ b/tcl/board/ek-lm3s1968.cfg
@@ -1,22 +1,19 @@
 #
 # TI/Luminary Stellaris LM3S1968 Evaluation Kits
 #
-# http://www.luminarymicro.com/products/lm3s1968_evaluation_kits.html
+# http://www.ti.com/tool/ek-lm3s1968
+#
 
 # NOTE:  to use J-Link instead of the on-board interface,
-# you may also need to reduce jtag_khz to be about 1200.
+# you may also need to reduce adapter_khz to be about 1200.
 # source [find interface/jlink.cfg]
 
 # include the FT2232 interface config for on-board JTAG interface
-source [find interface/luminary.cfg]
+# NOTE:  using the on-board FT2232 JTAG/SWD/SWO interface is optional!
+# so is using in JTAG mode, as done here.
+source [find interface/ftdi/luminary.cfg]
 
 # include the target config
-source [find target/lm3s1968.cfg]
-
-# jtag speed
-jtag_khz 3000
-
-jtag_nsrst_delay 100
-
-#LM3S1968 Evaluation Board has only srst
-reset_config srst_only
+set WORKAREASIZE 0x2000
+set CHIPNAME lm3s1968
+source [find target/stellaris.cfg]