X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Fboard%2Fhilscher_nxeb500hmi.cfg;fp=tcl%2Fboard%2Fhilscher_nxeb500hmi.cfg;h=64391561e68246e4de31da4eeab9f7a5f4380649;hp=9accd98db66da2b73eb5d061941f6d70e87cfe77;hb=4e31b8794319127851ff98a0bc271b394baf921f;hpb=90d33c5c87a162d5208cb9bbf8ccd7982a672a8c

diff --git a/tcl/board/hilscher_nxeb500hmi.cfg b/tcl/board/hilscher_nxeb500hmi.cfg
index 9accd98db6..64391561e6 100644
--- a/tcl/board/hilscher_nxeb500hmi.cfg
+++ b/tcl/board/hilscher_nxeb500hmi.cfg
@@ -5,7 +5,7 @@
 source [find target/hilscher_netx500.cfg]
 
 reset_config trst_and_srst
-jtag_nsrst_delay 500
+adapter_nsrst_delay 500
 jtag_ntrst_delay 500
 
 $_TARGETNAME configure -work-area-virt 0x1000 -work-area-phys 0x1000 -work-area-size 0x4000 -work-area-backup 1