X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Fboard%2Fhilscher_nxeb500hmi.cfg;fp=tcl%2Fboard%2Fhilscher_nxeb500hmi.cfg;h=9accd98db66da2b73eb5d061941f6d70e87cfe77;hp=0000000000000000000000000000000000000000;hb=6839618062f07a12bd969da8dc54546f96938b67;hpb=c9544e411dce8e1c9f0513dee55834779f32bcb0

diff --git a/tcl/board/hilscher_nxeb500hmi.cfg b/tcl/board/hilscher_nxeb500hmi.cfg
new file mode 100644
index 0000000000..9accd98db6
--- /dev/null
+++ b/tcl/board/hilscher_nxeb500hmi.cfg
@@ -0,0 +1,40 @@
+################################################################################
+# Author: Michael Trensch (MTrensch@googlemail.com)
+################################################################################
+
+source [find target/hilscher_netx500.cfg]
+
+reset_config trst_and_srst
+jtag_nsrst_delay 500
+jtag_ntrst_delay 500
+
+$_TARGETNAME configure -work-area-virt 0x1000 -work-area-phys 0x1000 -work-area-size 0x4000 -work-area-backup 1
+
+$_TARGETNAME configure -event reset-init {
+  halt
+
+  arm7_9 fast_memory_access enable
+  arm7_9 dcc_downloads disable
+
+  sdram_fix
+  
+  puts "Configuring SDRAM controller for MT48LC8M32 (32MB) "
+  mww 0x00100140 0
+  mww 0x00100144 0x03C23251
+  mww 0x00100140 0x030D0111
+
+  puts "Configuring SRAM nCS0 for 150ns Par. Flash (x16)"
+  mww 0x00100100 0x0101000E
+
+  flash probe 0
+}
+
+#####################
+# Flash configuration
+#####################
+
+#flash bank <name> <driver> <base> <size> <chip width> <bus width> <target#>
+flash bank parflash cfi 0xC0000000 0x01000000 2 2 $_TARGETNAME
+
+init
+reset init