X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Fboard%2Fosk5912.cfg;h=f4378f8cfed5316fd26d14345dcb2f29302c7367;hp=c33ae285ce8c2aec416774be987e36478cf05bff;hb=ff555afc02d50ca57fc6e71787d34a8e985cf115;hpb=2dfa5e9c844a5a3f8aaca146c874f13570b8f667

diff --git a/tcl/board/osk5912.cfg b/tcl/board/osk5912.cfg
index c33ae285ce..f4378f8cfe 100644
--- a/tcl/board/osk5912.cfg
+++ b/tcl/board/osk5912.cfg
@@ -19,10 +19,8 @@ etm_dummy config $_TARGETNAME
 
 # standard boards populate two 16 MB chips, but manufacturing
 # options or an expansion board could change this config.
-set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME cfi 0x00000000 0x01000000 2 2 $_TARGETNAME
-set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME cfi 0x01000000 0x01000000 2 2 $_TARGETNAME
+flash bank osk.u1 cfi 0x00000000 0x01000000 2 2 $_TARGETNAME
+flash bank osk.u2 cfi 0x01000000 0x01000000 2 2 $_TARGETNAME
 
 proc osk5912_init {} {
 	omap5912_reset
@@ -32,3 +30,5 @@ proc osk5912_init {} {
 	flash probe 1
 }
 $_TARGETNAME configure -event reset-init { osk5912_init }
+
+arm7_9 dcc_downloads enable