X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Fboard%2Fx300t.cfg;h=9d9a320fbbc57234004969b61f2b92bd8ddc064d;hp=985f44edf60db3d62ab69a61e31bf1f14dc9c7ff;hb=1c2e3d41de30c5e47d3fc8eda3de0a0a8229895a;hpb=dbbc9c41f7db210b0a4e226540a28e0a8a5019bf

diff --git a/tcl/board/x300t.cfg b/tcl/board/x300t.cfg
index 985f44edf6..9d9a320fbb 100644
--- a/tcl/board/x300t.cfg
+++ b/tcl/board/x300t.cfg
@@ -7,8 +7,9 @@ source [find target/smp8634.cfg]
 $_TARGETNAME configure -event reset-init { x300t_init }
 
 # 1MB CFI capable flash
-# flash bank <driver> <base> <size> <chip_width> <bus_width>
-flash bank cfi 0xac000000 0x100000 2 2 0
+# flash bank <name> <driver> <base> <size> <chip_width> <bus_width> <target>
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME cfi 0xac000000 0x100000 2 2 $_TARGETNAME
 
 proc x300t_init { } {
 	# Setup SDRAM config and flash mapping
@@ -18,13 +19,13 @@ proc x300t_init { } {
 	mww 0xa0030000 0xE34111BA
 	mww 0xa003fffc 0xa4444
 	mww 0xa003fffc 0
-	
+
 	# remap boot vector in CPU local RAM
 	mww 0xa006f000 0x60000
-	
+
 	# map flash to CPU address space REG_BASE_cpu_block+CPU_remap4
 	mww 0x0006f010 0x48000000
-	
+
 	# map flash addr to REG_BASE_cpu_block + LR_XENV_LOCATION (normally done by XOS)
 	mww 0x00061ff0 0x48000000
 }