X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Finterface%2Fbuspirate.cfg;h=20761d152628e038314ec87233327a9f2c762dcf;hp=2b68538bf622388311510266f7b27f8f8f289c8e;hb=HEAD;hpb=30da7c67cec8b315972377b5389735ff11f6042c

diff --git a/tcl/interface/buspirate.cfg b/tcl/interface/buspirate.cfg
index 2b68538bf6..8f613a7645 100644
--- a/tcl/interface/buspirate.cfg
+++ b/tcl/interface/buspirate.cfg
@@ -1,26 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 #
 # Buspirate with OpenOCD support
 #
 # http://dangerousprototypes.com/bus-pirate-manual/
 #
 
-interface buspirate
+adapter driver buspirate
 
 # you need to specify port on which BP lives
-#buspirate_port /dev/ttyUSB0
+#buspirate port /dev/ttyUSB0
 
 # communication speed setting
-buspirate_speed normal ;# or fast
+buspirate speed normal ;# or fast
 
 # voltage regulator Enabled = 1 Disabled = 0
-#buspirate_vreg 0
+#buspirate vreg 0
 
-# pin mode normal or open-drain
-#buspirate_mode normal
+# pin mode normal or open-drain (jtag only)
+#buspirate mode normal
 
 # pullup state Enabled = 1 Disabled = 0
-#buspirate_pullup 0
+#buspirate pullup 0
 
 # this depends on the cable, you are safe with this option
 reset_config srst_only
-