X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Finterface%2Fraspberrypi-native.cfg;h=634b8c95aa7973cdf43f1c5d453e59cf83bea78c;hp=2d0547f310d1b70f3f2b3949d77cffa6df3d70ec;hb=e57ffd84b89a9f33b55d887212fc88e9f2c6ab39;hpb=2fdf6788e20d53f8368f508de5ff39627d8ce27a

diff --git a/tcl/interface/raspberrypi-native.cfg b/tcl/interface/raspberrypi-native.cfg
index 2d0547f310..634b8c95aa 100644
--- a/tcl/interface/raspberrypi-native.cfg
+++ b/tcl/interface/raspberrypi-native.cfg
@@ -10,28 +10,28 @@
 
 adapter driver bcm2835gpio
 
-bcm2835gpio_peripheral_base 0x20000000
+bcm2835gpio peripheral_base 0x20000000
 
 # Transition delay calculation: SPEED_COEFF/khz - SPEED_OFFSET
 # These depend on system clock, calibrated for stock 700MHz
-# bcm2835gpio_speed SPEED_COEFF SPEED_OFFSET
-bcm2835gpio_speed_coeffs 113714 28
+# bcm2835gpio speed SPEED_COEFF SPEED_OFFSET
+bcm2835gpio speed_coeffs 113714 28
 
 # Each of the JTAG lines need a gpio number set: tck tms tdi tdo
 # Header pin numbers: 23 22 19 21
-bcm2835gpio_jtag_nums 11 25 10 9
+bcm2835gpio jtag_nums 11 25 10 9
 
 # Each of the SWD lines need a gpio number set: swclk swdio
 # Header pin numbers: 23 22
-bcm2835gpio_swd_nums 11 25
+bcm2835gpio swd_nums 11 25
 
 # If you define trst or srst, use appropriate reset_config
 # Header pin numbers: TRST - 26, SRST - 18
 
-# bcm2835gpio_trst_num 7
+# bcm2835gpio trst_num 7
 # reset_config trst_only
 
-# bcm2835gpio_srst_num 24
+# bcm2835gpio srst_num 24
 # reset_config srst_only srst_push_pull
 
 # or if you have both connected,