X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Ftarget%2Faduc702x.cfg;h=c9037100fe7ce5da96118944fd7f7749c66da319;hp=d58b723a9d6dcaa3dda4a364c018e44824454806;hb=HEAD;hpb=b559b273b526b3077b3ca219eecc8df9f86efac0

diff --git a/tcl/target/aduc702x.cfg b/tcl/target/aduc702x.cfg
index d58b723a9d..c9037100fe 100644
--- a/tcl/target/aduc702x.cfg
+++ b/tcl/target/aduc702x.cfg
@@ -1,23 +1,25 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 if { [info exists CHIPNAME] } {
-   set  _CHIPNAME $CHIPNAME
+   set _CHIPNAME $CHIPNAME
 } else {
-   set  _CHIPNAME aduc702x
+   set _CHIPNAME aduc702x
 }
 
 if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
+   set _ENDIAN $ENDIAN
 } else {
-  # This config file was defaulting to big endian..
-   set  _ENDIAN little
+   # This config file was defaulting to big endian..
+   set _ENDIAN little
 }
 
 if { [info exists CPUTAPID] } {
-   set  _CPUTAPID $CPUTAPID
+   set _CPUTAPID $CPUTAPID
 } else {
-   set  _CPUTAPID 0x3f0f0f0f
+   set _CPUTAPID 0x3f0f0f0f
 }
 
-adapter_nsrst_delay 200
+adapter srst delay 200
 jtag_ntrst_delay 200
 
 ## JTAG scan chain
@@ -45,9 +47,9 @@ flash bank $_FLASHNAME aduc702x 0 0 0 0 $_TARGETNAME
 proc watchdog_service {} {
     global watchdog_hdl
     mww 0xffff036c 0
-#    puts "watchdog!!"
+#    echo "watchdog!!"
     set watchdog_hdl [after 500 watchdog_service]
 }
 
 $_TARGETNAME configure -event reset-halt-post {  watchdog_service }
-$_TARGETNAME configure -event old-pre_resume { global watchdog_hdl; after cancel $watchdog_hdl }
+$_TARGETNAME configure -event resume-start { global watchdog_hdl; after cancel $watchdog_hdl }