X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Ftarget%2Fat91sam3nXX.cfg;h=19bd33a9e8f801a5e76e7a0089f65c024f95f88d;hp=9e362b26698abcfeb6de47d03589cd0d6c9a725b;hb=38030e011542a894237b517c065d22db97525954;hpb=ca45e700b1c57caca2ef08e665e3c7e3e02ac8d3

diff --git a/tcl/target/at91sam3nXX.cfg b/tcl/target/at91sam3nXX.cfg
index 9e362b2669..19bd33a9e8 100644
--- a/tcl/target/at91sam3nXX.cfg
+++ b/tcl/target/at91sam3nXX.cfg
@@ -3,6 +3,8 @@
 # Configuration for Atmel's SAM3N series
 #
 
+source [find target/swj-dp.tcl]
+
 if { [info exists CHIPNAME] } {
 	set _CHIPNAME $CHIPNAME
 } else {
@@ -15,10 +17,16 @@ if { [info exists CPUTAPID] } {
 	set _CPUTAPID 0x4ba00477
 }
 
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m3 -endian little -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -endian little -chain-position $_TARGETNAME
 
 set _FLASHNAME $_CHIPNAME.flash
 flash bank flash0 at91sam3 0x00400000 0 0 0 $_TARGETNAME
+
+if {![using_hla]} {
+   # if srst is not fitted use SYSRESETREQ to
+   # perform a soft reset
+   cortex_m reset_config sysresetreq
+}