X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Ftarget%2Fat91sam7se512.cfg;h=ab0970128d8806dcfa8ce42b9aff081218e67438;hp=c48afeffd54027f67b796e96da2612fb35f2b65f;hb=fffe8e672572da46046b12a5d6b037057059393e;hpb=a1ce28b118e758015a4e8ba1cb74815aa4193ee0

diff --git a/tcl/target/at91sam7se512.cfg b/tcl/target/at91sam7se512.cfg
index c48afeffd5..ab0970128d 100644
--- a/tcl/target/at91sam7se512.cfg
+++ b/tcl/target/at91sam7se512.cfg
@@ -1,24 +1,23 @@
-
 # ATMEL sam7se512
 # Example: the "Elektor Internet Radio" - EIR
 # http://www.ethernut.de/en/hardware/eir/index.html
 
 if { [info exists CHIPNAME] } {
-   set  _CHIPNAME $CHIPNAME
+   set _CHIPNAME $CHIPNAME
 } else {
-   set  _CHIPNAME sam7se512
+   set _CHIPNAME sam7se512
 }
 
 if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
+   set _ENDIAN $ENDIAN
 } else {
-   set  _ENDIAN little
+   set _ENDIAN little
 }
 
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
-  # force an error till we get a good number
+   # Force an error until we get a good number.
    set _CPUTAPID 0xffffffff
 }
 
@@ -30,7 +29,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP
 
 # The target
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
 
 $_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0