X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Ftarget%2Fat91sam9260.cfg;h=c5a07fdd995bda53322e10945e12e634f8479f25;hp=4d51831da313c46bb1723b85e6b1272feba99636;hb=1663a17d9d5f5988a8d129a6da36ebcf728d79a2;hpb=dbbc9c41f7db210b0a4e226540a28e0a8a5019bf

diff --git a/tcl/target/at91sam9260.cfg b/tcl/target/at91sam9260.cfg
index 4d51831da3..c5a07fdd99 100644
--- a/tcl/target/at91sam9260.cfg
+++ b/tcl/target/at91sam9260.cfg
@@ -2,41 +2,18 @@
 # Target:    Atmel AT91SAM9260
 ######################################
 
-if { [info exists CHIPNAME] } {	
-   set  _CHIPNAME $CHIPNAME    
-} else {	 
-   set  _CHIPNAME at91sam9260
-}
-
-if { [info exists ENDIAN] } {	
-   set  _ENDIAN $ENDIAN    
-} else {	 
-   set  _ENDIAN little
-}
-
-if { [info exists CPUTAPID ] } {
-   set _CPUTAPID $CPUTAPID
+if { [info exists CHIPNAME] } {
+	set AT91_CHIPNAME $CHIPNAME
 } else {
-  # force an error till we get a good number
-   set _CPUTAPID 0x0792603f
+	set AT91_CHIPNAME at91sam9260
 }
 
-reset_config trst_and_srst
-
-#
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-
-jtag_nsrst_delay 200
-jtag_ntrst_delay 200
-
-######################
-# Target configuration
-######################
-
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
+source [find target/at91sam9.cfg]
 
-# Internal sram1 memory
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00300000 -work-area-size 0x1000 -work-area-backup 1
 
+# Establish internal SRAM memory work areas that are important to pre-bootstrap loaders, etc.  The
+# AT91SAM9260 has two SRAM areas, one starting at 0x00200000 and the other starting at 0x00300000.
+# Both areas are 4 kB long.
 
+#$_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x1000 -work-area-backup 1
+$_TARGETNAME configure -work-area-phys 0x00300000 -work-area-size 0x1000 -work-area-backup 1