X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Ftarget%2Fat91sam9260.cfg;h=c5a07fdd995bda53322e10945e12e634f8479f25;hp=6fc71a316507758982edaf0802a09fee1c69dbcb;hb=05c6c871e3328dd38dc46ea11b3b9b546feb7850;hpb=ce89c7bf6588c7b2800c4ca453278b6f94795130

diff --git a/tcl/target/at91sam9260.cfg b/tcl/target/at91sam9260.cfg
index 6fc71a3165..c5a07fdd99 100644
--- a/tcl/target/at91sam9260.cfg
+++ b/tcl/target/at91sam9260.cfg
@@ -2,43 +2,18 @@
 # Target:    Atmel AT91SAM9260
 ######################################
 
-if { [info exists CHIPNAME] } {	
-   set  _CHIPNAME $CHIPNAME    
-} else {	 
-   set  _CHIPNAME at91sam9260
-}
-
-if { [info exists ENDIAN] } {	
-   set  _ENDIAN $ENDIAN    
-} else {	 
-   set  _ENDIAN little
-}
-
-if { [info exists CPUTAPID ] } {
-   set _CPUTAPID $CPUTAPID
+if { [info exists CHIPNAME] } {
+	set AT91_CHIPNAME $CHIPNAME
 } else {
-  # force an error till we get a good number
-   set _CPUTAPID 0x0792603f
+	set AT91_CHIPNAME at91sam9260
 }
 
-reset_config trst_and_srst separate trst_push_pull srst_open_drain
-
-#
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-
-jtag_nsrst_delay 300
-jtag_ntrst_delay 200
-
-jtag_rclk 3
-
-######################
-# Target configuration
-######################
-
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
+source [find target/at91sam9.cfg]
 
-# Internal sram1 memory
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00300000 -work-area-size 0x1000 -work-area-backup 1
 
+# Establish internal SRAM memory work areas that are important to pre-bootstrap loaders, etc.  The
+# AT91SAM9260 has two SRAM areas, one starting at 0x00200000 and the other starting at 0x00300000.
+# Both areas are 4 kB long.
 
+#$_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x1000 -work-area-backup 1
+$_TARGETNAME configure -work-area-phys 0x00300000 -work-area-size 0x1000 -work-area-backup 1