X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Ftarget%2Fat91samdXX.cfg;h=9a396fa139806abee8d6e0d7275a52086724c9b7;hp=47b4f5f161cf5ef71c44cd1ab06d416f37de431f;hb=HEAD;hpb=0c8ec7c826c60391034fe5f0ea90f8538ac94b38

diff --git a/tcl/target/at91samdXX.cfg b/tcl/target/at91samdXX.cfg
index 47b4f5f161..5132109ba8 100644
--- a/tcl/target/at91samdXX.cfg
+++ b/tcl/target/at91samdXX.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 #
 # script for Atmel SAMD, SAMR, SAML or SAMC, a Cortex-M0 chip
 #
@@ -34,9 +36,10 @@ if { [info exists CPUTAPID] } {
 }
 
 swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID
+dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -endian $_ENDIAN -dap $_CHIPNAME.dap
 
 $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
 
@@ -53,11 +56,6 @@ $_TARGETNAME configure -event reset-deassert-post {
 # srst_pulls_trst is not configured here to avoid an error raised in reset halt
 reset_config srst_gates_jtag
 
-# Atmel's EDBG (on-board cmsis-dap adapter of Xplained kits) cannot
-# stop the MCU before it starts executing code if hardware RESETN
-# line is configured by command "reset_config srst_only"
-# Use "reset_config none" (default) before flash programming.
-
 # Do not use a reset button with other SWD adapter than Atmel's EDBG.
 # DSU usually locks MCU in reset state until you issue a reset command
 # in OpenOCD.
@@ -70,12 +68,12 @@ reset_config srst_gates_jtag
 # This limit is most probably imposed by incorrectly handled SWD WAIT
 # on some SWD adapters.
 
-adapter_khz 400
+adapter speed 400
 
 # Atmel's EDBG (on-board cmsis-dap adapter of Xplained kits) works
 # without problem at maximal clock speed. Atmel recommends
 # adapter speed less than 10 * CPU clock.
-# adapter_khz 5000
+# adapter speed 5000
 
 if {![using_hla]} {
    # if srst is not fitted use SYSRESETREQ to