X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Ftarget%2Fc100.cfg;h=5b4354e909147f4709522379b066aaa79880a5d1;hp=e5b8600bbdfa5c5c0d70d148563719fd9123250c;hb=HEAD;hpb=b4acbee47fcb29afc9958b4a9e74b9916a415dec

diff --git a/tcl/target/c100.cfg b/tcl/target/c100.cfg
index e5b8600bbd..c268ba3ba2 100644
--- a/tcl/target/c100.cfg
+++ b/tcl/target/c100.cfg
@@ -1,29 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 # c100 config.
 # This is ARM1136 dual core
 # this script only configures one core (that is used to run Linux)
 
 # assume no PLL lock, start slowly
-jtag_khz 100
+adapter speed 100
 
-if { [info exists CHIPNAME] } {	
-   set  _CHIPNAME $CHIPNAME    
-} else {	 
-   set  _CHIPNAME c100
+if { [info exists CHIPNAME] } {
+   set _CHIPNAME $CHIPNAME
+} else {
+   set _CHIPNAME c100
 }
 
-if { [info exists ENDIAN] } {	
-   set  _ENDIAN $ENDIAN    
-} else {	 
-   set  _ENDIAN little
+if { [info exists ENDIAN] } {
+   set _ENDIAN $ENDIAN
+} else {
+   set _ENDIAN little
 }
 
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
    set _CPUTAPID 0x27b3645b
 }
 
-if { [info exists DSPTAPID ] } {
+if { [info exists DSPTAPID] } {
    set _DSPTAPID $DSPTAPID
 } else {
    set _DSPTAPID 0x27b3645b
@@ -35,7 +37,7 @@ jtag newtap $_CHIPNAME dsp -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_D
 # Per ARM: DDI0211J_arm1136_r1p5_trm.pdf - the ARM 1136 as a 5 bit IR register
 jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_CPUTAPID
 
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME arm11 -endian $_ENDIAN -chain-position $_TARGETNAME
 
 # C100's ARAM 64k SRAM