X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Ftarget%2Fcs351x.cfg;h=cb05da2cfc97502e70e75a28c30c80ba619b3a4a;hp=51631d36c225e9bccac979c3dc7743ffe54d685b;hb=bdef93520a4721e1ed4ac4675476772fab064896;hpb=bc9df17e424887f37ae3d785c2e8faf4b70f0df2

diff --git a/tcl/target/cs351x.cfg b/tcl/target/cs351x.cfg
index 51631d36c2..cb05da2cfc 100644
--- a/tcl/target/cs351x.cfg
+++ b/tcl/target/cs351x.cfg
@@ -1,30 +1,31 @@
-if { [info exists CHIPNAME] } {	
-   set  _CHIPNAME $CHIPNAME    
-} else {	 
-   set  _CHIPNAME cs351x
-}
-
-if { [info exists ENDIAN] } {	
-   set  _ENDIAN $ENDIAN    
-} else {	 
-   set  _ENDIAN little
-}
-
-if { [info exists CPUTAPID ] } {
-   set _CPUTAPID $CPUTAPID
-} else {
-   set _CPUTAPID 0x00526fa1
-}
-
-jtag newtap $_CHIPNAME cpu  -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-
-# Create the GDB Target.
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME fa526 -endian $_ENDIAN -chain-position $_TARGETNAME -variant fa526
-# There is 16K of SRAM on this chip
-# FIXME: flash programming is not working by using this work area. So comment this out for now.
-#$_TARGETNAME configure -work-area-virt 0x00000000 -work-area-phys 0x00000000 -work-area-size  0x4000 -work-area-backup 1
-
-# This chip has a DCC ... use it
-arm7_9 dcc_downloads enable
-
+if { [info exists CHIPNAME] } {
+   set _CHIPNAME $CHIPNAME
+} else {
+   set _CHIPNAME cs351x
+}
+
+if { [info exists ENDIAN] } {
+   set _ENDIAN $ENDIAN
+} else {
+   set _ENDIAN little
+}
+
+if { [info exists CPUTAPID] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+   set _CPUTAPID 0x00526fa1
+}
+
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+# Create the GDB Target.
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME fa526 -endian $_ENDIAN -chain-position $_TARGETNAME
+
+# There is 16K of SRAM on this chip
+# FIXME: flash programming is not working by using this work area. So comment this out for now.
+#$_TARGETNAME configure -work-area-phys 0x00000000 -work-area-size 0x4000 -work-area-backup 1
+
+# This chip has a DCC ... use it
+arm7_9 dcc_downloads enable
+