X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Ftarget%2Fepc9301.cfg;h=f186d37dc680410482dc905150c3449472cf71dd;hp=9eea39b5c92de5a0c36f50227d081df1af3c7457;hb=45a86f8e2a58c7c0acb6328a660846946e81ed1c;hpb=ce89c7bf6588c7b2800c4ca453278b6f94795130

diff --git a/tcl/target/epc9301.cfg b/tcl/target/epc9301.cfg
index 9eea39b5c9..f186d37dc6 100644
--- a/tcl/target/epc9301.cfg
+++ b/tcl/target/epc9301.cfg
@@ -1,31 +1,32 @@
 # Cirrus Logic EP9301 processor on an Olimex CS-E9301 board.
 
-if { [info exists CHIPNAME] } {	
-   set  _CHIPNAME $CHIPNAME    
-} else {	 
-   set  _CHIPNAME ep9301
+if { [info exists CHIPNAME] } {
+   set _CHIPNAME $CHIPNAME
+} else {
+   set _CHIPNAME ep9301
 }
 
-if { [info exists ENDIAN] } {	
-   set  _ENDIAN $ENDIAN    
-} else {	 
-   set  _ENDIAN little
+if { [info exists ENDIAN] } {
+   set _ENDIAN $ENDIAN
+} else {
+   set _ENDIAN little
 }
 
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
-  # force an error till we get a good number
+   # Force an error until we get a good number.
    set _CPUTAPID 0xffffffff
 }
 
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-jtag_nsrst_delay 100
+adapter_nsrst_delay 100
 jtag_ntrst_delay 100
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -work-area-virt 0 -work-area-phys 0x80014000 -work-area-size 0x1000 -work-area-backup 1
+target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -work-area-phys 0x80014000 -work-area-size 0x1000 -work-area-backup 1
 
 #flash configuration
 #flash bank <driver> <base> <size> <chip_width> <bus_width> [driver_options ...]
-flash bank cfi 0x60000000 0x1000000 2 2 0
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME cfi 0x60000000 0x1000000 2 2 $_TARGETNAME