X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Ftarget%2Fimx21.cfg;h=410bce8fc3a3641c6b6e113504648f5f51cadc3b;hp=fd2143e181f40906c04c0f7e0aee63aa5d16a5f5;hb=71af49ca7fb11b0bd0c1ba9578826f49288b68ef;hpb=dbbc9c41f7db210b0a4e226540a28e0a8a5019bf

diff --git a/tcl/target/imx21.cfg b/tcl/target/imx21.cfg
index fd2143e181..410bce8fc3 100644
--- a/tcl/target/imx21.cfg
+++ b/tcl/target/imx21.cfg
@@ -1,20 +1,22 @@
 #use combined on interfaces or targets that can't set TRST/SRST separately
+#
+# Hmmm.... should srst_pulls_trst be used here like i.MX27???
 reset_config trst_and_srst
 
-if { [info exists CHIPNAME] } {	
-   set  _CHIPNAME $CHIPNAME    
-} else {	 
+if { [info exists CHIPNAME] } {
+   set  _CHIPNAME $CHIPNAME
+} else {
    set  _CHIPNAME imx21
 }
 
-if { [info exists ENDIAN] } {	
-   set  _ENDIAN $ENDIAN    
-} else {	 
+if { [info exists ENDIAN] } {
+   set  _ENDIAN $ENDIAN
+} else {
    set  _ENDIAN little
 }
 
 
-# Note above there is 1 tap 
+# Note above there is 1 tap
 
 # The CPU tap
 if { [info exists CPUTAPID ] } {
@@ -26,7 +28,7 @@ jtag newtap $_CHIPNAME cpu  -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_C
 
 
 # Create the GDB Target.
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
 
 arm7_9 dcc_downloads enable