X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Ftarget%2Flpc1xxx.cfg;h=1969e464f692b754d1fd3f859e54b1bc02653aa1;hp=701adf2782d40d4c9fe505bcb1af75e04a368107;hb=b3ed97a4925ff441c3c2679d01e6cdb6edc123d8;hpb=8f777bc1a66b5f604fde8bbdbe64206413c8aa1c

diff --git a/tcl/target/lpc1xxx.cfg b/tcl/target/lpc1xxx.cfg
index 701adf2782..1969e464f6 100644
--- a/tcl/target/lpc1xxx.cfg
+++ b/tcl/target/lpc1xxx.cfg
@@ -99,10 +99,14 @@ $_TARGETNAME configure -work-area-phys 0x10000000 -work-area-size $_WORKAREASIZE
 # (same cmd51 destination boundary alignment, and all three support 256 byte
 # transfers).
 #
-# flash bank <name> lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum]
+# flash bank <name> lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum] [iap entry]
+set _IAP_ENTRY 0
+if { [info exists IAP_ENTRY] } {
+	set _IAP_ENTRY $IAP_ENTRY
+}
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME lpc2000 0x0 0 0 0 $_TARGETNAME \
-	auto $_CCLK calc_checksum
+	auto $_CCLK calc_checksum $_IAP_ENTRY
 
 if { $_CHIPSERIES == "lpc800" || $_CHIPSERIES == "lpc1100" || $_CHIPSERIES == "lpc1200" || $_CHIPSERIES == "lpc1300" } {
 	# Do not remap 0x0000-0x0200 to anything but the flash (i.e. select