X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Ftarget%2Fomap3530.cfg;h=c2929d1c4079ba8e7cb7a213514baa7f1e55ff7e;hp=018363a973a162d263b710ac6d29b3d72339e6ea;hb=a0a504569b5ae4d6e485414c43be0fd4bb216bab;hpb=ca45e700b1c57caca2ef08e665e3c7e3e02ac8d3

diff --git a/tcl/target/omap3530.cfg b/tcl/target/omap3530.cfg
index 018363a973..c2929d1c40 100644
--- a/tcl/target/omap3530.cfg
+++ b/tcl/target/omap3530.cfg
@@ -36,7 +36,7 @@ jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f \
 
 # GDB target: Cortex-A8, using DAP
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_a8 -chain-position $_CHIPNAME.dap
+target create $_TARGETNAME cortex_a -chain-position $_CHIPNAME.dap
 
 # SRAM: 64K at 0x4020.0000; use the first 16K
 $_TARGETNAME configure -work-area-phys 0x40200000 -work-area-size 0x4000
@@ -53,8 +53,8 @@ jtag configure $_CHIPNAME.jrc -event post-reset "runtest 100"
 jtag configure $_CHIPNAME.jrc -event setup "jtag tapenable $_CHIPNAME.dap"
 
 proc omap3_dbginit {target} {
-     # General Cortex A8 debug initialisation
-     cortex_a8 dbginit
+     # General Cortex-A8 debug initialisation
+     cortex_a dbginit
      # Enable DBGU signal for OMAP353x
      $target mww phys 0x5401d030 0x00002000
 }
@@ -62,8 +62,8 @@ proc omap3_dbginit {target} {
 # be absolutely certain the JTAG clock will work with the worst-case
 # 16.8MHz/2 = 8.4MHz core clock, even before a bootloader kicks in.
 # OK to speed up *after* PLL and clock tree setup.
-jtag_rclk 1000
-$_TARGETNAME configure -event "reset-start" { jtag_rclk 1000 }
+adapter_khz 1000
+$_TARGETNAME configure -event "reset-start" { adapter_khz 1000 }
 
 # Assume SRST is unavailable (e.g. TI-14 JTAG), so we must assert reset
 # ourselves using PRM_RSTCTRL.  RST_GS (2) is a warm reset, like ICEpick