X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Ftarget%2Fpxa270.cfg;h=bd904b5dd660689f649ca87c30aa234eed1ce59c;hp=62cb4f43edd23b78d4d95cce4b113ace9290100d;hb=78c87f5e81f8b3ee2a72aa546f87985596cb2b9f;hpb=ca45e700b1c57caca2ef08e665e3c7e3e02ac8d3

diff --git a/tcl/target/pxa270.cfg b/tcl/target/pxa270.cfg
index 62cb4f43ed..bd904b5dd6 100644
--- a/tcl/target/pxa270.cfg
+++ b/tcl/target/pxa270.cfg
@@ -34,9 +34,9 @@ if { [info exists CPUTAPID3] } {
    set _CPUTAPID3 0x89265013
 }
 
-# set adapter_nsrst_delay to the delay introduced by your reset circuit
+# set adapter srst delay to the delay introduced by your reset circuit
 # the rest of the needed delays are built into the openocd program
-adapter_nsrst_delay 260
+adapter srst delay 260
 # set the jtag_ntrst_delay to the delay introduced by a reset circuit
 # the rest of the needed delays are built into the openocd program
 jtag_ntrst_delay 250
@@ -44,7 +44,7 @@ jtag_ntrst_delay 250
 set _TARGETNAME $_CHIPNAME.cpu
 jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID -expected-id $_CPUTAPID2 -expected-id $_CPUTAPID3
 
-target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant pxa27x
+target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME
 # maps to PXA internal RAM. If you are using a PXA255
 # you must initialize SDRAM or leave this option off
 $_TARGETNAME configure -work-area-phys 0x5c000000 -work-area-size 0x10000 -work-area-backup 0