X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Ftarget%2Fsamsung_s3c6410.cfg;h=88fe966dcd3b42f7c84963ac6ba0227b6d499da2;hp=594d32169f43a2c80a02606b11f14ab1e70a259c;hb=05c6c871e3328dd38dc46ea11b3b9b546feb7850;hpb=71af49ca7fb11b0bd0c1ba9578826f49288b68ef

diff --git a/tcl/target/samsung_s3c6410.cfg b/tcl/target/samsung_s3c6410.cfg
index 594d32169f..88fe966dcd 100644
--- a/tcl/target/samsung_s3c6410.cfg
+++ b/tcl/target/samsung_s3c6410.cfg
@@ -7,43 +7,45 @@
 # [and I do not believe it to be accurate, hence the 0xffffffff below]
 
 if { [info exists CHIPNAME] } {
-   set  _CHIPNAME $CHIPNAME
+   set _CHIPNAME $CHIPNAME
 } else {
-   set  _CHIPNAME s3c6410
+   set _CHIPNAME s3c6410
 }
 
 if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
+   set _ENDIAN $ENDIAN
 } else {
   # this defaults to a bigendian
-   set  _ENDIAN little
+   set _ENDIAN little
 }
 
-if { [info exists BSTAPID ] } {
-   set _BSTAPID $BSTAPID
+# trace buffer
+if { [info exists ETBTAPID] } {
+   set _ETBTAPID $ETBTAPID
 } else {
-  # force an error till we get a good number
-   set _BSTAPID 0x2b900f0f
+   set _ETBTAPID 0x2b900f0f
 }
 
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
-  # force an error till we get a good number
    set _CPUTAPID 0x07b76f0f
 }
 
 #jtag scan chain
 
-# I think the "unknown" is the boundry scan tap
-jtag newtap $_CHIPNAME unknown -irlen 4 -ircapture 0x1 -irmask 0xe  -expected-id $_BSTAPID
-jtag newtap $_CHIPNAME cpu     -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_CPUTAPID
+jtag newtap $_CHIPNAME etb -irlen 4 -expected-id $_ETBTAPID
+jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_CPUTAPID
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm11 -endian $_ENDIAN  -chain-position $_TARGETNAME -variant arm1176
+target create $_TARGETNAME arm11 -endian $_ENDIAN -chain-position $_TARGETNAME
 
-jtag_nsrst_delay 500
+adapter_nsrst_delay 500
 jtag_ntrst_delay 500
 
 #reset configuration
 reset_config trst_and_srst
+
+# trace setup ... NOTE, "normal full" mode fudges the real ETMv3.1 mode
+etm config $_TARGETNAME 16 normal full etb
+etb config $_TARGETNAME $_CHIPNAME.etb